What's inside
- Top Picks at a Glance
- Quick Comparison Table
- 1. HPFIX 22 x 14.2 Inch Magnetic Silicone Mat: Best Overall
- 2. STREBITO 21.7 x 15.8 Inch Large Mat: Best Large Workspace
- 3. Kaisi Large Soldering Mat: Best Value
- 4. YIHUA M180: Best for SMD Rework
- 5. AKEOIL 17.7 x 11.8 Inch Mat: Best Mid-Size
- 6. STREBITO 13.8 x 9.9 Inch Mat: Best Budget and Compact
- Also Consider
- How We Chose
- Buying Guide
- Organising a PCB Repair Session on the Mat
- Common Mistakes to Avoid
- Frequently Asked Questions
- Which One Should You Buy?
- Sources
- Top Picks at a Glance
- Quick Comparison Table
- 1. HPFIX 22 x 14.2 Inch Magnetic Silicone Mat: Best Overall
- 2. STREBITO 21.7 x 15.8 Inch Large Mat: Best Large Workspace
- 3. Kaisi Large Soldering Mat: Best Value
- 4. YIHUA M180: Best for SMD Rework
- 5. AKEOIL 17.7 x 11.8 Inch Mat: Best Mid-Size
- 6. STREBITO 13.8 x 9.9 Inch Mat: Best Budget and Compact
- Also Consider
- How We Chose
- Buying Guide
- Organising a PCB Repair Session on the Mat
- Common Mistakes to Avoid
- Frequently Asked Questions
- Which One Should You Buy?
- Sources
As an Amazon Associate I earn from qualifying purchases. This post may contain affiliate links at no extra cost to you.
Home › Accessories › Best Magnetic Silicone Soldering Mat for PCB Repair: 6 Picks
The best magnetic silicone soldering mat for PCB repair is a large, heat-resistant pad with a magnetic surface that holds screws in place, and the HPFIX 22 x 14.2 inch mat and the STREBITO 21.7 x 15.8 inch mat are the strongest all-round picks in this guide. If your bench is small, the STREBITO 13.8 x 9.9 inch mat and the AKEOIL 17.7 x 11.8 inch mat fit tighter spaces. All six mats here are advertised as heat resistant to about 932 degrees Fahrenheit (500 degrees Celsius), except where noted, and all use a silicone work surface with magnetic features.
A soldering mat does three jobs at once. It protects your table from the heat of an iron or a hot air tool, it stops small parts from rolling away, and on a magnetic model it holds steel screws where you can find them again after you have taken apart a laptop, console or phone. For PCB repair, that third feature is what separates a good mat from a plain heat pad: when a board has fifteen screws of four different lengths, a magnetic mat with a printed grid or labelled sections keeps them sorted.
This guide compares six real, currently sold silicone soldering mats, explains what the heat rating does and does not mean, and shows how to match mat size to the boards you repair. It is research-based. We did not personally use these mats, so specifications come from listing titles and maker information, and anything missing is marked “not listed.” No mat guarantees safety around hot tools; follow your soldering equipment maker’s instructions.
As an Amazon Associate we earn from qualifying purchases at no extra cost to you.
Top Picks at a Glance
- Best Overall: HPFIX 22 x 14.2 inch magnetic silicone mat. Large work area, 932 degrees Fahrenheit rating, magnetic surface.
- Best Large Workspace: STREBITO 21.7 x 15.8 inch mat. The biggest mat in the guide, built for screws and tools.
- Best Value: Kaisi large soldering mat. Magnetic, silicone, advertised as anti-static.
- Best for Rework Stations: YIHUA M180. Anti-slip, magnetic, rated 500 degrees Celsius, aimed at SMD rework and phone repair.
- Best Mid-Size: AKEOIL 17.7 x 11.8 inch mat. Compact, with magnetic parts holding.
- Best Budget and Compact: STREBITO 13.8 x 9.9 inch mat. Smallest footprint with the same 932 degrees Fahrenheit rating.
Quick Comparison Table
| Product | Best for | Key specs (per listing) | Watch for | Price tier |
|---|---|---|---|---|
| HPFIX 22 x 14.2 in | Full bench, laptop boards | 932 F, magnetic, silicone, about 312 sq in | Takes a lot of bench space | Mid-range |
| STREBITO 21.7 x 15.8 in | Large projects with many screws | 932 F, magnetic, about 343 sq in | Largest and heaviest to store | Mid-range |
| Kaisi Large | Value with anti-static wording | Silicone, magnetic, anti-static (per listing) | Size and temperature rating not shown in the title | Mid-range |
| YIHUA M180 | SMD rework and phone repair | Anti-slip, magnetic, 500 C, silicone | Dimensions not listed in the title | Mid-range |
| AKEOIL 17.7 x 11.8 in | Shared desks | 932 F, silicone, magnetic parts, about 209 sq in | Smaller area for big boards | Budget |
| STREBITO 13.8 x 9.9 in | Small boards, travel kit | 932 F, silicone, magnetic, about 137 sq in | Tight for anything larger than a phone board | Budget |
1. HPFIX 22 x 14.2 Inch Magnetic Silicone Mat: Best Overall
- 22 x 14.2 inch silicone work mat
- Heat resistant to 932 degrees Fahrenheit, per the listing
- Magnetic surface for screws and small parts
- Designed for computer, phone and laptop repair, per the listing
Best for: hobbyists and technicians who repair laptops and mainboards and need room for a board, an iron stand, flux and tweezers at once. Skip if: your desk is narrower than the mat.
The size is the main reason this model leads. At roughly 312 square inches, it leaves space for a laptop mainboard in the middle and a parts area at the side. That matters in PCB repair, where a cluttered mat leads to knocked tweezers and lost parts. The 932 degrees Fahrenheit rating is above the temperatures most soldering irons run at, so brief contact with a hot tip or a hot air nozzle should not be a concern, though you should still not rest the iron on the mat for long periods.
HPFIX sells several mats in this line, including a smaller 17.3 x 11.8 inch version. If you do not need the size, the compact version saves bench space. The listing does not describe a printed grid or labelled sections, so check the product images if screw mapping matters to you.
Pros: large work area; magnetic; high stated heat rating; made for electronics repair. Cons: large footprint; no printed grid described; mid-range price.
2. STREBITO 21.7 x 15.8 Inch Large Mat: Best Large Workspace
- 21.7 x 15.8 inch silicone mat
- Up to 932 degrees Fahrenheit, per the listing
- Magnetic surface for screws and tools
- Solder pad for repair work
Best for: technicians who repair larger boards, such as desktop motherboards or gaming consoles. Skip if: you want a mat that rolls up small for a travel bag.
At about 343 square inches, this is the largest mat here by a modest margin. The extra width can be the difference between a clean bench and screws sliding off the side of a smaller pad. A large mat also gives you a place for a hot air station tip rest and a flux pen without crowding the board. The listing says the surface is magnetic for screws and tools, so steel parts such as tweezers and screws should stay put, though non-magnetic metals such as aluminum or brass will not.
The trade-off is storage. A mat this size needs a drawer or a roll. Silicone pads can pick up dust, so a quick rinse with mild soap and water, followed by thorough drying, helps keep the surface clean before the next job.
Pros: largest area; magnetic; heat rating stated; suited to big boards. Cons: bulky; mid-range price; no grid details in the listing.
3. Kaisi Large Soldering Mat: Best Value
- Large heat-resistant silicone soldering mat
- Magnetic electronic solder pad
- Anti-static wording in the listing
- Exact size and temperature rating: not shown in the title
Best for: buyers who want a large magnetic mat at a moderate price. Skip if: you need to confirm dimensions and temperature before ordering.
The Kaisi listing describes a large silicone mat that is magnetic and advertised as anti-static. Anti-static wording is common on silicone mats, but it is not the same as a grounded ESD mat: silicone is naturally an insulator, and an “anti-static” label on its own does not tell you the surface resistance or whether you can ground the mat. If you work on sensitive chips, add a proper ESD mat and a wrist strap, rather than relying on the label.
Several Kaisi variants exist, including a smaller S130 mat with a scale ruler. Make sure the listing you choose is the large one and check its dimensions on the product page. Because the title does not state a temperature rating, verify that figure with the seller before using it with hot air.
Pros: large; magnetic; mid-range price; anti-static wording. Cons: size and rating not in the title; anti-static claim is not detailed; several similar listings.
4. YIHUA M180: Best for SMD Rework
- Anti-slip magnetic silicone mat
- Heat resistant to 500 degrees Celsius, per the listing
- Aimed at soldering, SMD rework and mobile phone repair
- Dimensions: not listed in the title
Best for: rework stations and phone repair benches where a hot air station is used regularly. Skip if: you need to know exact dimensions before buying.
YIHUA is known for soldering and rework equipment, so a mat from the same brand family pairs naturally with their stations. The listing highlights an anti-slip surface, which matters when you press with tweezers or a spudger and do not want the mat to slide on a smooth bench. The 500 degrees Celsius rating equals 932 degrees Fahrenheit, the same ceiling as the other mats here, and that is above typical soldering and hot air temperatures. Hot air tools can run hot at the nozzle, so keep the nozzle moving and do not hold it on the mat.
A sibling model, the M150, adds storage slots, a built-in ruler and a bendable silicone design. Pick the M150 if you want organisation features and the M180 if a plain magnetic work surface is enough. As with all mats, check the listing for the printed size before you place an order.
Pros: anti-slip; magnetic; made for SMD rework; stated 500 C. Cons: dimensions not in the title; mid-range price; limited organisation features.
5. AKEOIL 17.7 x 11.8 Inch Mat: Best Mid-Size
- 17.7 x 11.8 inch silicone mat
- 932 degrees Fahrenheit heat resistance, per the listing
- Anti-static wording and magnetic parts holding, per the listing text
- For electronics repair
Best for: shared desks and smaller benches that still need room for a phone or tablet board. Skip if: you repair large laptop boards.
At about 209 square inches, this mat is two thirds the area of the HPFIX. That is enough for a phone logic board, a small controller or an audio module. The mid-size is also easier to stow, and it fits on most office desks without hanging over the edge. Because the listing text is cut off, we cannot say how the magnetic feature is arranged, so check the product images to see whether the whole surface is magnetic or only a section.
The 17.7 x 11.8 inch size is common across several brands, including PAFOWO and Dorisun, so you can compare similar sizes if you prefer another brand. Choose by the quality of the silicone and the clarity of the heat rating, not just the dimensions.
Pros: mid-size; budget tier; 932 F rating; magnetic parts holding. Cons: less room for big boards; magnet layout unclear; limited brand information.
6. STREBITO 13.8 x 9.9 Inch Mat: Best Budget and Compact
- 13.8 x 9.9 inch silicone mat
- 932 degrees Fahrenheit heat resistance, per the listing
- Magnetic mat for screws and tools
- Small footprint
Best for: phone repair, small boards and a travel kit. Skip if: you open laptops or consoles.
At roughly 137 square inches, this mat has just enough space for a phone and a small parts tray. It is the best choice if your bench is small or you take your kit to events. A small mat suffers when you spread out a large board, so do not buy it as your only mat if you plan to repair laptops. It is, however, an affordable second mat to keep in a toolbox.
The listing gives the same 932 degrees Fahrenheit rating as the larger STREBITO mat, so you get the same heat tolerance in a smaller size. Because two STREBITO models appear in this guide, we have not included any other models from that brand in the main picks.
Pros: small; low cost; magnetic; same heat rating as larger mats. Cons: limited area; not for large boards; few extra features.
Also Consider
HengTianMei 203 Magnetic Repair Mat
The listing describes a black, magnetic, heat-resistant, large silicone soldering mat that expands the work area. It is a straightforward alternative if you prefer a dark surface that hides flux stains.
YIHUA M150 With Storage Slots and Ruler
This soft, bendable silicone mat has multiple storage slots and a built-in ruler. It is a good fit if organising tiny screws matters more than a flat open surface.
PAFOWO Silicone Soldering Mat, 17.7 x 11.8 Inch
This is a mid-size mat advertised as heat resistant to 932 degrees Fahrenheit and anti-static. Whether it is magnetic is not stated in the title, so verify before buying if that feature matters.
HPFIX 17.3 x 11.8 Inch Magnetic Mat
The smaller version of the HPFIX mat in the first pick. It suits benches that cannot fit the 22-inch version.
How We Chose
This guide is research-based. We did not personally use these products. We started with silicone soldering mats in the product store for this site, then narrowed the list to models with a magnetic feature in the title or description. We compared size, stated heat rating, anti-static wording and the kinds of repair each listing targets. We then checked brand names against maker information and general guidance from electronics-repair publications.
When the listing did not state a spec, we wrote “not listed.” We capped each brand at two models, described prices only as tiers and computed the surface areas ourselves from the stated dimensions. We did not use any mat for soldering, so our comments on durability and staining reflect typical silicone behaviour, not long-term ownership.
Buying Guide
Size: match the mat to your boards
Measure your largest board and add room for tools. A laptop mainboard can be about 12 by 9 inches, which fits on a mat of 17.7 x 11.8 inches but leaves no space for tools. A 22 x 14.2 inch mat gives you about 312 square inches, enough for the board plus an iron stand, flux and tweezers. A phone board is much smaller, and the 13.8 x 9.9 inch mat is enough. As a rule of thumb, buy a mat with at least double the area of your largest board.
Heat rating
Listings for these mats state 932 degrees Fahrenheit, or 500 degrees Celsius. Typical soldering iron tip temperatures are well below that, and hot air work is often at or below 400 degrees Celsius, so the rating gives some headroom. A rating is a maximum for brief contact, not permission to rest a hot iron on the mat or to hold a hot air nozzle in one place. Use the iron stand for the iron, and keep flammable items away from the work area.
Magnetic surface
A magnetic mat holds steel screws and tools. It will not hold aluminium, brass or stainless steel grades that are not magnetic. Keep the mat away from magnetic media and from sensitive instruments, and never put a magnetic mat under a mechanical hard drive. If a mat has a printed grid or labelled zones, you can map screws by position, which saves time during reassembly.
Anti-static claims
Silicone is an insulator. A mat advertised as anti-static may still not be an ESD-grounded mat. For sensitive electronics, use a purpose-made ESD mat connected to ground and wear a wrist strap. Treat the silicone soldering mat as a heat and parts-organising surface, not as a replacement for an ESD system.
Cleaning and wear
Flux residue and solder splashes are the main things that mark a mat. Wipe with isopropyl alcohol on a lint-free cloth and, if the maker allows, wash with mild soap and water. Let it dry before folding. A silicone mat may smell on first use, so air it out. Replace the mat when edges curl or the surface is pitted, because uneven surfaces let parts roll.
Safety basics
Solder fumes come from the flux, so work with ventilation or a fume extractor. Leaded solder needs handwashing after use. Follow the maker’s manuals for your iron or hot air station, and keep cables off the mat edge so you do not pull the tool off the bench. A mat does not make a hot tool safe; it only protects the table.
Decision guide
| Your situation | Pick | Reason |
|---|---|---|
| Laptop and mainboard repair | HPFIX 22 x 14.2 in | About 312 sq in, magnetic |
| Console or desktop boards | STREBITO 21.7 x 15.8 in | About 343 sq in |
| Hot air and SMD rework | YIHUA M180 | Anti-slip, 500 C |
| Value, large size | Kaisi Large | Magnetic, silicone |
| Shared desk | AKEOIL 17.7 x 11.8 in | About 209 sq in |
| Phone repair, travel | STREBITO 13.8 x 9.9 in | About 137 sq in |
Organising a PCB Repair Session on the Mat
A magnetic mat works best when you give it a layout. Divide the surface into three zones. Keep the board in the centre, tools you reach for often on your dominant-hand side, and screws on the opposite side. If the mat has no printed grid, sketch a quick map on paper that mirrors the board outline, then place each screw on the matching spot on the mat. This turns reassembly from a guessing game into a simple lookup, and it is especially valuable on laptops, where screw lengths vary by position.
Work in the order that protects the board. Remove batteries and cables first, then take out the screws and park them on the mat, then lift the board and place it on a non-conductive surface. Keep flux pens, solder wire and a small brush within reach but off the board, and give the iron stand a spot at the edge of the mat so the cable falls off the bench rather than across the board. When you finish, let the mat cool, wipe off flux, and fold or roll it according to the maker’s guidance so the surface does not crack along a hard crease.
If you solder daily, consider owning two mats: a large one that stays on the bench and a small one in your toolbox for field repairs. The small one also doubles as a clean surface for sorting screws during disassembly while the large one handles the hot work.
Common Mistakes to Avoid
- Buying too small. A cramped mat leads to knocked parts and burnt fingers.
- Resting the iron on the mat. Use a stand; the mat is a backup, not a holder.
- Assuming anti-static means ESD-safe. Use a grounded mat and wrist strap for sensitive chips.
- Placing magnets near hard drives. Keep strong magnets away from magnetic storage.
- Ignoring ventilation. Flux fumes are best drawn away from your face.
Frequently Asked Questions
Is a silicone soldering mat necessary?
It is not strictly required, but it protects your bench and holds parts in place. Most repair workers find a mat quickly pays for itself.
What does 932 degrees Fahrenheit mean on a mat?
It is the maximum temperature the maker says the silicone tolerates, equal to 500 degrees Celsius. It is for brief contact, not for resting a hot tool.
Will a magnetic mat hold all screws?
It holds steel screws. Non-magnetic metals such as aluminium and brass will not stick, so keep a small tray for those.
Can I use these mats with a hot air station?
The listed heat rating is above typical hot air settings, but keep the nozzle moving and follow your station’s manual. Do not hold the nozzle on one spot of the mat.
Are silicone mats ESD safe?
Not by default. Silicone is an insulator, and an anti-static label does not replace a grounded ESD mat and wrist strap for sensitive electronics.
How do I clean flux off the mat?
Wipe it with isopropyl alcohol on a lint-free cloth, or wash it with mild soap and water if the maker permits, and let it dry fully.
What size mat should I buy?
Choose a mat with at least twice the area of your largest board. For laptop repair, 17 x 12 inches or larger is a practical starting point; for phones, a 14 x 10 inch mat is often enough.
Which One Should You Buy?
Choose the HPFIX 22 x 14.2 inch mat for general PCB repair and the STREBITO 21.7 x 15.8 inch mat if you work on large boards. Pick the YIHUA M180 for rework and phone repair, the Kaisi large mat for value, and the AKEOIL or compact STREBITO mats for smaller benches. Whichever you buy, confirm the dimensions, keep the iron on its stand, and add an ESD mat and wrist strap if you handle sensitive chips.
Sources
- HPFIX, STREBITO, Kaisi, AKEOIL and YIHUA product listings
- Soldering iron and hot air station maker manuals for temperature and safety guidance
- Electronics repair publications on ESD handling
- Silicone mat maker care instructions
Last updated: October 2026
Related guides
Read next
More from Amazon
Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.
A free business account with business pricing and bulk-buying tools for work, shop or home office.
Create a business accountFree shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.
Start a Prime free trialAudiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.
Try Audible freeAd-free music streaming. Eligible new subscribers can start with a free trial.
Try Music Unlimited freeAs an Amazon Associate we earn from qualifying purchases.




Write Your Review
No reviews yet. Be the first to share your experience!