What's inside
As an Amazon Associate I earn from qualifying purchases. This post may contain affiliate links at no extra cost to you.
Owning a Kubota lawn mower is one thing; keeping it running season after season is another. The search for kubota lawn mowers pulls in a wide range of buyers — collectors who want scale replicas of the machines they admire, owners mid-repair who need a specific deck spindle or blade set to fit their model, and budget-conscious shoppers looking for a capable electric push mower that can handle a larger yard without gas-engine noise. Sorting through that mix is where most buyers get frustrated.
What separates a worthwhile purchase from a disappointing one here is almost always fitment and value. A blade that matches your deck width and bolt pattern saves you a return label; a spindle rated for your hours-per-season load keeps the deck stable through tall grass; a collectible with accurate proportions and clean paint holds shelf appeal far better than a generic lookalike. This roundup compares published specs, list prices, and aggregate owner feedback across eight products that represent the most common buyer intents, compiled for 2026.
As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Product prices and availability are accurate as of the date shown and are subject to change.
Quick Picks
| Product | Best For | Price |
|---|---|---|
| 1/64 Kubota Z700 Pull Back | Desk or shelf collectors | $16.99 |
| 1/18 Kubota BX2670 by New Ray | Display with figure and accessories | $29.99 |
| Greenworks 40V 16in Push Mower | Small-yard owners avoiding gas | $258.99 |
| MaxPower 561172B 3-Blade Set | USA-made blade replacement | $50.84 |
| 8TEN Deck Spindle K5579-34510 | Spindle rebuild without full deck swap | $114.95 |
| budrash Blades 42-Inch 2-Pack | Z122R and RCK42P owners | $35.99 |
| 8TEN LawnRAZOR 54-Inch 3-Pack | BX and ZG series high-lift needs | $52.95 |
| 8TEN LawnRAZOR 70000-00602 3-Pack | Toothed-edge cuts on compatible decks | $49.95 |
How We Picked
For this category we weighted three factors above all others. First, confirmed fitment: does the product explicitly list the Kubota model or part number it replaces? Second, price relative to OEM alternatives and peer aftermarket options at comparable build quality. Third, long-term owner feedback on wear, balance, and packaging. A product that excels in one area but fails on fitment gets ranked lower than a mid-priced item with clean compatibility documentation.
The 8 Best Kubota Lawn Mowers in 2026
1. 1/64 Kubota Z700 Zero Turn Lawn Mower, Pull Back Action
This die-cast replica suits collectors who already own larger Kubota scale models and want the Z700 on their shelf without taking up much space. The pull-back action gives it interactive appeal for casual display settings.
- Accurate proportions and paint scheme matching the real Z700
- Low entry price makes it easy to grab on a whim
- Small size means fine details get lost next to larger models
Skip it if you prefer a static display piece with a stand; the pull-back mechanism adds a small moving part that can wear over years of shelf time.
2. 1/18 Kubota BX2670 Lawn Tractor with Figure & Accessories by New Ray SS-33453
Targeted at collectors who want a more substantial display than a 1/64 piece. The included operator figure and accessories create a vignette that photographs well and gives the shelf a sense of scale.
- Figure and accessories elevate it from toy to diorama element
- New Ray’s reputation for consistent casting and paint
- Higher price reflects the added detail, but still reasonable for the niche
Pass if your shelf is already crowded with larger tractors; the BX2670 is compact even at 1/18 and can look out of place beside a full-size model.
3. Greenworks 40V 16in Push Lawn Mower, 4.0 Ah Battery and Charger
A Kubota yard owner who needs a secondary mower for tight spaces, garden beds, or a neighbor’s small lot will find this the most practical non-Kubota option here. The 40V platform means the battery works across other Greenworks tools.
- Zero gas engine noise and no fuel storage headaches
- 4.0 Ah capacity covers a meaningful area per charge
- 16-inch width means more passes on larger plots
Skip it if your primary need is Kubota-compatible parts; this is a standalone mower that happens to fill the search intent for people comparing options.
4. MaxPower 561172B USA Made 3-Blade Set
Owners who prioritize domestic manufacturing and a balanced set will appreciate this three-blade kit. MaxPower positions it for multi-deck applications where matched weight and hardness matter more than a single spare.
- Made in the USA with stated quality controls
- Sold as a matched set, simplifying simultaneous replacement
- Not explicitly cross-referenced to a single Kubota part number in listings
Consider alternatives if you need a blade guaranteed to match a very specific bolt-hole pattern without measuring first.
5. 8TEN Deck Spindle for Kubota K5579-34510+K5653-34550 7.83-Inch
When only one spindle on your deck is worn or bent, replacing the pair is wasteful. This 8TEN unit targets the owner who needs a single spindle with confirmed OEM cross-references and 7.83-inch height.
- Lists specific Kubota part numbers for straightforward verification
- Sold individually, so you buy only what you need
- Higher per-unit cost than a two-spindle bundle
Grab a spindle kit instead if your deck hours suggest both are nearing the end of service life.
6. budrash K5559-34330 Lawn Mower Blades Compatible with Kubota 42-Inch Zero Turn Mower Z122R RCK42P-122Z RCK42P-90T
A two-pack priced under $40 makes this the go-to for Z122R and RCK42P owners who rotate blades each season. The listing cross-references five OEM numbers, reducing fitment guesswork.
- Extensive cross-reference list covering multiple deck variants
- Low per-blade cost encourages timely seasonal swaps
- Some owners report needing to sharpen edges before first use
If your mower is outside the 42-inch RCK/Z122 family, verify the bolt pattern before ordering.
7. 8TEN LawnRAZOR Blade for Kubota BX2360 BX24 BX2660 ZG127S ZG23 GR2110 54-Inch High Lift 3 Pack
High-lift blades suit owners with heavy grass or bagging setups on the BX and ZG series. The 54-inch blade length and three-pack configuration cover a full deck replacement in one purchase.
- Wide model compatibility across BX, ZG, and GR lines
- High-lift profile aids collection and discharge through dense turf
- Heavier lift means slightly more drag on smaller engines
Stick with a medium-lift or mulching blade if your tractor runs a lower-horsepower engine and you mostly do side discharge.
8. 8TEN LawnRAZOR Mower Blade for Kubota 70000-00602 Toothed 3-Pack
The toothed cutting edge is the selling point here, aimed at owners who want aggressive slicing on tough, fibrous grass. Three blades match a common deck configuration, and the price sits just under fifty dollars.
- Toothed edge grips and cuts through thatch better than flat-blade equivalents
- Clear OEM number reference (70000-00602) for quick confirmation
- Teeth can dull faster than flat edges on sandy or gritty lawns
If your yard has sandy soil or frequent grit, a standard flat blade will likely outlast the toothed profile over a season.
Buying Guide
Confirming Fitment Before You Click Buy
The single most important step is matching your deck’s bolt-hole pattern, blade length, and spindle height to the product listing. Kubota uses different part numbers across series and model years, so a blade that fits a 2018 BX23 may not match a 2022 variant. When a listing cites the OEM number — like budrash referencing K5559-34330 or 8TEN referencing 70000-00602 — that gives you a concrete cross-check against your parts manual or the number stamped on the existing component.
Blade Profile Matters as Much as Material
Flat, high-lift, toothed, and mulching profiles each solve different problems. High-lift blades create more airflow for bagging but demand extra engine power. Toothed edges bite into dense growth yet wear quicker in abrasive conditions. A matched three-blade set ensures balanced rotation; mixing profiles or brands across one deck invites vibration that shortens spindle life.
Scale Models as Practical Reference Tools
For collectors, a well-made 1/18 or 1/64 replica serves double duty as a reference. Seeing the deck width, discharge chute angle, and wheelbase in miniature can help you judge how a full-size Kubota mower will fit a tight gate or slope before you commit to a purchase. New Ray’s BX2670 with its included operator figure and accessories captures these spatial cues in a way product photos sometimes miss.
Our Verdict
Top pick: the budrash 42-Inch Blade 2-Pack at $35.99 earns the spot because its extensive OEM cross-reference list removes the most common buyer anxiety — will it fit? — at the lowest price per blade in this group. Budget pick: the 1/64 Kubota Z700 at $16.99 is the cheapest way to get Kubota branding on your desk with reasonable accuracy. Condition that shifts the winner: if you need a high-lift blade for a BX-series tractor with a bagger attached, the 8TEN LawnRAZOR 54-Inch 3-Pack takes priority despite costing more, because its profile matches that use case directly.
FAQ
Can I use a Greenworks push mower alongside a Kubota zero turn?
Yes, and many owners do exactly that. The Greenworks 40V works well as a detail mower around flower beds, fences, and tight corners where a zero turn’s turning radius is too wide for clean passes.
How do I know which blade profile my deck requires?
Check the part number stamped on your existing blade and compare it to Kubota’s parts catalog or the cross-references listed on aftermarket products. A mulching blade from an OEM will not have the same lift characteristics as a high-lift blade even if it fits the same spindle.
Are scale Kubota models worth collecting?
Within the die-cast collector community, Kubota replicas by New Ray and similar makers hold value because the brand’s tractors and mowers have a loyal owner base. Accuracy of paint scheme, proportion, and included accessories drives resale price more than sheer size.
Should I replace both blades and the spindle at the same time?
If your deck hours are high enough that one spindle shows wear, the opposite spindle likely has similar play. Replacing them together while blades are off saves a second teardown and ensures balanced rotation on the next season’s start.