What's inside
- Top Picks at a Glance
- Hole Saw Kits Compared
- 1. Diablo Bi-Metal Hole Saw Set (10 Saw Cups): Best Overall
- 2. Spyder 17-Piece Bi-Metal Electrician Hole Saw Kit: Best for Electrical Work
- 3. Milwaukee 49-22-4105 Master Electrician’s Ice Hardened Kit: Best Pro Kit
- 4. EZARC 16-Piece M42 Bi-Metal Kit: Best Value for Wood and Thin Metal
- 5. HYCHIKA 17-Piece HSS Bi-Metal Kit: Best Budget Bi-Metal
- 6. ANGELSWORD 24-Piece Hole Saw Kit: Best for Drywall and Softwood
- 7. Klein Tools 31872 Hole Cutter Kit: Best Compact Kit for Electrical Boxes
- Also Consider
- How We Chose
- Buying Guide
- Quick Match: Material to Kit
- How to Cut Clean Holes
- Common Hole Saw Mistakes
- Frequently Asked Questions
- Which One Should You Buy?
- Sources
- Top Picks at a Glance
- Hole Saw Kits Compared
- 1. Diablo Bi-Metal Hole Saw Set (10 Saw Cups): Best Overall
- 2. Spyder 17-Piece Bi-Metal Electrician Hole Saw Kit: Best for Electrical Work
- 3. Milwaukee 49-22-4105 Master Electrician’s Ice Hardened Kit: Best Pro Kit
- 4. EZARC 16-Piece M42 Bi-Metal Kit: Best Value for Wood and Thin Metal
- 5. HYCHIKA 17-Piece HSS Bi-Metal Kit: Best Budget Bi-Metal
- 6. ANGELSWORD 24-Piece Hole Saw Kit: Best for Drywall and Softwood
- 7. Klein Tools 31872 Hole Cutter Kit: Best Compact Kit for Electrical Boxes
- Also Consider
- How We Chose
- Buying Guide
- Quick Match: Material to Kit
- How to Cut Clean Holes
- Common Hole Saw Mistakes
- Frequently Asked Questions
- Which One Should You Buy?
- Sources
As an Amazon Associate I earn from qualifying purchases. This post may contain affiliate links at no extra cost to you.
Home › Accessories › Best Hole Saw Kits for Wood, Drywall and Electrical Service Work
The best hole saw kits for wood, drywall and electrical service work are the Diablo 10-saw-cup bi-metal set for general carpentry, the Spyder 17-piece bi-metal electrician kit for conduit and box work, and the Milwaukee 19-piece Master Electrician’s kit for crews that cut every day. For home projects on softwood, plywood and drywall, a budget set such as the 24-piece ANGELSWORD kit is enough, and for clean cuts through a mix of wood and thin metal the EZARC 16-piece M42 bi-metal kit is a strong value. This guide ranks seven kits, adds four alternatives, and explains how to match a hole saw to the material.
Readers searching for the best hole saws for wood, the best hole saws for metal, wood and fiberglass, or the best hole saws for electrical service usually need the same decision framework: what the cup is made of, what the teeth are shaped like, which sizes are in the kit, and which arbor holds it all together. This article focuses on wood, drywall, plastic, thin metal and electrical jobs. If your main job is cutting stainless steel or hard plate, the carbide-tipped choice is a different category, and our companion guide on carbide-tipped hole saws covers it in depth.
As an Amazon Associate we earn from qualifying purchases at no extra cost to you.
Top Picks at a Glance
- Best Overall: Diablo bi-metal hole saw set, 10 saw cups from 7/8 to 2-9/16 inch with the Snap-Lock Plus mandrel system.
- Best for Electricians: Spyder 17-piece bi-metal electrician kit with 13 hole saws and Rapid Core Ejection.
- Best Pro Kit: Milwaukee 49-22-4105 Master Electrician’s Ice Hardened kit, 19 pieces.
- Best Value Bi-Metal: EZARC 16-piece kit, M42 with 8 percent cobalt, 3/4 to 2-1/2 inch.
- Best Budget Bi-Metal: HYCHIKA 17-piece high speed steel kit, 3/4 to 2-1/2 inch, with mandrels and case.
- Best for Drywall and Softwood Projects: ANGELSWORD 24-piece kit, 3/4 to 6 inch, 1 inch cutting depth.
- Best Compact Carbide for Electrical Boxes: Klein Tools 31872 four-piece hole cutter kit with carbide cutters and a pilot bit.
Hole Saw Kits Compared
| Product | Best for | Key specs (from listing) | Watch for | Price tier |
|---|---|---|---|---|
| Diablo Bi-Metal Set | General carpentry, doors, plumbing | 10 saw cups, 7/8 to 2-9/16 in, 2-3/8 in cutting length, Snap-Lock Plus | Needs its own mandrel system | Premium |
| Spyder 17-Piece Electrician Kit | Conduit, boxes, service panels | 13 hole saws, Hex8 and Hex10 HSS pilot bits, Rapid Core Ejection | Size range depends on kit contents | Premium |
| Milwaukee 49-22-4105 | Daily professional use | 19 pieces, Ice Hardened teeth | Higher outlay | Premium |
| EZARC 16-Piece | Mixed wood and thin metal | M42 8% cobalt bi-metal, 10 hole saws, 3/4 to 2-1/2 in | Fewer large sizes | Mid-range |
| HYCHIKA 17-Piece | Home projects on a budget | HSS, 3/4 to 2-1/2 in, mandrels and case | Cup grade less specific | Budget |
| ANGELSWORD 24-Piece | Drywall, softwood, plywood, PVC | 3/4 to 6 in, 1 in cutting depth | Shallow depth, not for metal | Budget |
| Klein Tools 31872 | Electrical knockouts and enclosures | 4 carbide cutters plus pilot bit, molded case | Only four sizes | Mid-range |
1. Diablo Bi-Metal Hole Saw Set (10 Saw Cups): Best Overall
- 10 saw cups ranging from 7/8 to 2-9/16 inch
- 2-3/8 inch cutting length
- Works with the Snap-Lock Plus mandrel system
- Bi-metal construction
Best for: woodworkers and remodelers who need door-lock holes, plumbing penetrations and general-purpose cutting. Skip if: you cut hard stainless regularly, where a carbide kit makes more sense.
A 2-3/8 inch cutting length is the spec that sets this kit apart from the shallow cups in many budget sets. It lets the cup pass through a 2×4 wall plate or a thick door edge in one pass, which means one setup rather than flipping the workpiece. The size range from 7/8 to 2-9/16 inch covers most common holes: door knobs, cable runs, plumbing lines and conduit fittings.
The Snap-Lock mandrel system is a quality-of-life feature. Instead of threading and unthreading cups from the arbor, you snap the cup into place and release it by hand, which saves time when you change sizes frequently. As with any bi-metal cup, keep the speed moderate in metal and let the teeth cut rather than leaning your weight into the drill.
Pros: deep cutting length, quick-change mandrel, wide size range for carpentry. Cons: needs a compatible mandrel to use the quick-change feature; costs more than basic sets.
2. Spyder 17-Piece Bi-Metal Electrician Hole Saw Kit: Best for Electrical Work
- 13 hole saws
- Hex8 and Hex10 HSS pilot bits and arbors
- Rapid Core Ejection feature
- Bi-metal teeth
Best for: electricians and serious DIYers installing boxes, conduit and service equipment. Skip if: you only need two or three sizes for a one-off job.
For those searching for the best hole saws for electrical service, the practical features matter more than the headline piece count. Rapid Core Ejection is meant to address the most annoying part of using a hole saw: the plug of material that jams inside the cup. A design that lets you push or pop the plug out saves minutes on every hole. The two arbor sizes (Hex8 and Hex10) suggest the kit is built for fast changes between drill types and sizes.
Electrical work uses standard knockout and fitting sizes. For reference, a common conduit knockout for a half-inch fitting is about 7/8 inch, three quarter inch uses about 1-1/8 inch, and one inch uses about 1-3/8 inch. Always check the fitting you are installing against the cup diameter before cutting, since fitting dimensions vary by brand.
Pros: electrician-focused sizes and ejection, spare pilot bits, tidy kit. Cons: premium tier; verify the exact size list before buying.
3. Milwaukee 49-22-4105 Master Electrician’s Ice Hardened Kit: Best Pro Kit
- 19-piece kit
- Ice Hardened teeth, per the model name
- Master Electrician’s set for professional use
Best for: electrical contractors and anyone who cuts holes every working day. Skip if: you cut a handful of holes a year.
Milwaukee’s Ice Hardened line is its name for a heat-treated tooth process intended to hold an edge through long use. A 19-piece kit suggests a full spread of sizes, arbors and pilot bits, though the exact contents are best confirmed on the maker’s page since they are not spelled out in the title. This is the kit for people who want to avoid dull teeth halfway through a rough-in.
The value argument for a pro kit is cost per hole. Cheap kits wear out and are replaced; a premium kit is used for years, and individual cups can often be replaced separately. If you are not sure whether you will use it that heavily, the Diablo set above or the Spyder kit is a more modest step into the same class.
Pros: pro-grade teeth, comprehensive set, replaceable components. Cons: expensive for occasional use; contents not itemized in the title.
4. EZARC 16-Piece M42 Bi-Metal Kit: Best Value for Wood and Thin Metal
- M42 bi-metal with 8 percent cobalt
- 10 hole saws from 3/4 to 2-1/2 inch
- 4/6 TPI listed for the larger variants; arbors and pilot bits included
- Listed as cutting multiple materials
Best for: homeowners and light-duty tradespeople who need to cut wood, plastic and thin metal in one kit. Skip if: you need sizes above 2-1/2 inch.
M42 is a high speed steel with cobalt added, and 8 percent cobalt is a common premium grade for bi-metal cutting edges. The cobalt improves heat resistance, which matters when you cut metal, since friction can dull a plain high speed steel edge quickly. For wood alone, this is more than you need; for a toolbox that sees wood, PVC, sheet metal and the occasional steel plate, it is a sensible compromise.
The 3/4 to 2-1/2 inch range handles most household and light commercial jobs. If you need larger holes for recessed lighting, a dedicated large-diameter cup or a different kit is the better answer.
Pros: cobalt grade at a mid-range outlay, multi-material, arbors included. Cons: limited maximum size; verify tooth pitch for your material.
5. HYCHIKA 17-Piece HSS Bi-Metal Kit: Best Budget Bi-Metal
- 17 pieces
- High speed steel cups, 3/4 to 2-1/2 inch
- Mandrels and storage case included
Best for: home improvement projects where you cut wood, plastic and the odd piece of thin metal. Skip if: you drill hundreds of holes in a season.
A budget bi-metal kit is the best way to get started if you do not know which sizes you will use. The case and mandrels are included, so you can drill straight away, and you can later add a premium cup in the one size you use most. Because the listing does not specify cobalt content, expect it to perform best in wood, drywall, plastic and thin sheet metal rather than hard alloys.
Pros: good starter kit, case and arbors included, many sizes. Cons: steel grade less specific; not meant for hard metal.
6. ANGELSWORD 24-Piece Hole Saw Kit: Best for Drywall and Softwood
- 24 pieces, 3/4 to 6 inch hole saws
- Listed for drywall, softwood, plywood and PVC
- Cutting depth 1 inch
- Double-sided teeth design noted in the listing
Best for: light DIY work such as recessed light openings, speaker holes, PVC pipe runs and craft projects. Skip if: you need deep holes or you plan to cut metal.
The wide size range, up to 6 inches, is what makes this kit stand out for the price. Large holes for speakers, downlights and vents are awkward to cut with small bi-metal sets. The trade-off is depth: a 1 inch cutting depth is fine for drywall and thin boards but will not pass through a 2×4 in one pass. For thick lumber, buy a deeper cup in the specific size you need.
Large-diameter cups should be run at a lower speed than small ones. A big cup at high drill speed produces heat, vibration and a ragged edge. Clamp the workpiece, start slowly, and let the pilot bit establish the center before applying more speed.
Pros: huge size range, inexpensive, ideal for drywall and PVC. Cons: shallow depth, not for metal, expect lighter-duty durability.
7. Klein Tools 31872 Hole Cutter Kit: Best Compact Kit for Electrical Boxes
- 4-piece kit with carbide hole cutters
- Includes a pilot bit
- Rust-proof molded case
Best for: electricians who cut panels, enclosures and boxes and want a small, durable set. Skip if: you need many sizes in one kit.
Carbide cutters last longer in tough materials than standard bi-metal teeth, and a compact four-piece kit puts the most frequently used sizes in a case small enough to live in a tool bag. For work on enclosures, steel boxes and similar materials, this kit makes more sense than a broad bi-metal assortment. It is a complement to a wood-cutting kit rather than a replacement.
Pros: carbide durability, small and organized, rust-proof case. Cons: limited size range, not a general carpentry kit.
Also Consider
KATA 8-Piece Hole Saw Kit
A basic 1 to 2-1/8 inch carbon steel kit listed for wood, drywall, PVC and plastic. It is an entry-level pick for occasional jobs.
Diablo Bi-Metal Hole Saw Set for Electricians
A 10-saw-cup set ranging from 7/8 to 4-1/2 inch with two Snap-Lock Plus mandrels and pilot bits. It is a stronger fit than the 2-9/16 inch Diablo set when you need larger sizes.
Maycraft Impact Thinwall Hole Saw Kit
A 6-piece M42 cobalt bi-metal kit in 7/8, 1-1/8 and 1-3/8 inch sizes for thin metal, wood and PVC. It is useful for conduit penetrations in thin material.
HLOFIZI 4-1/4 Inch Carbide Tipped Hole Saw
A single-size carbide tipped cup listed for 4 inch recessed lights and dryer vents. Buy it when one large size is the entire job.
How We Chose
This guide is research-based. We did not personally use these hole saws. We compared manufacturer product pages and store listings, and we read published guidance from tool makers and trade publications on cutting speeds and hole saw selection. The seven kits represent different jobs: general carpentry, electrical service, professional daily use, mixed wood and thin metal, budget starter kits, large drywall holes and compact carbide cutters for enclosures.
All products are currently sold through the site’s store. Specs come from the listings: piece counts, size ranges, steel grade where stated and included accessories. Where a detail, such as exact kit contents or tooth pitch, was not in the listing, we mark it “not listed.” We do not quote prices or ratings; the price tiers are relative bands.
Buying Guide
Cup material: carbon steel, HSS, bi-metal, carbide
Carbon steel cups are inexpensive and suit soft materials like softwood, drywall and plastic. Bi-metal cups join a high speed steel tooth edge to a flexible backing, which makes them tougher and suitable for wood, plastic, aluminum and thin steel. Cobalt grades such as M42 resist heat better when cutting metal. Carbide-tipped cups are the choice for stainless steel, cast iron and abrasive materials like fiberglass and cement board. As a rule, buy the cheapest material that survives your hardest regular job.
Size range and the sizes you actually use
Count the sizes you will cut. Door hardware needs 2-1/8 inch and 1 inch; plumbing and conduit work calls for 7/8 to 2 inch; downlights take 3 to 6 inches. A 10-saw kit covers most household needs, but a kit with ten sizes of which you use three means the rest sit idle. In that case, a small set of quality cups can be a better buy than a big set of mediocre ones.
Cutting depth
Depth determines whether you can cut through a thick workpiece in one pass. A 1 inch depth suffices for drywall and thin panels; for 2x lumber you want at least 1-1/2 inch, and ideally 2-3/8 inch like the Diablo set. Deep cups are slower and need a plug-clearing strategy, but they save you from flipping the work.
Arbors, mandrels and pilot bits
The arbor is the shaft that holds the cup, and its quality affects how easily cups change and how well the saw runs true. Quick-change systems like Snap-Lock save time, while threaded arbors are simple and universal. A pilot bit centers the cup; look for replaceable pilot bits and keep a spare. Hex shanks fit most drills, but check the chuck size for impact drivers, since not all kits are designed for impact use.
Tooth pitch (TPI)
Variable pitch teeth cut multiple materials with less vibration. Coarser teeth, around 4 to 6 TPI, clear wood chips faster. Finer teeth cut thin metal more cleanly. If you mostly drill wood, prefer coarser; if you mostly drill sheet metal, prefer finer.
Quick Match: Material to Kit
- Softwood, plywood, drywall, PVC: ANGELSWORD 24-piece or KATA 8-piece; carbon steel is adequate and sizes up to 6 inches are available.
- Hardwood, doors and framing: Diablo 10-cup set for its deep cutting length and quick-change mandrel.
- Wood plus sheet metal and aluminum: EZARC M42 kit or HYCHIKA HSS kit, run at a lower speed in metal.
- Conduit, boxes and panels: Spyder electrician kit, Milwaukee Master Electrician’s kit, or the Klein carbide set for steel enclosures.
- Fiberglass and abrasive boards: choose carbide-tipped cups, since these materials wear steel teeth rapidly.
If a job straddles two categories, buy for the harder material. A cup that handles thin steel will cut wood without complaint, while the reverse is rarely true, and the extra cost of a cobalt or carbide cup is small compared with replacing a dull one midway through a project.
How to Cut Clean Holes
Technique matters as much as the kit. Mark the center, clamp the workpiece if possible and start the pilot bit at a low speed so the cup does not walk. Keep the drill square to the surface, and let the teeth cut at a steady feed instead of forcing the saw. Back the work with scrap wood to prevent blowout on the far side, or drill from both sides: stop when the pilot bit pokes through, flip the workpiece and finish from the other side for a clean edge.
In metal, use a slower speed, cutting fluid or wax, and clear the chips frequently. Overheating blunts teeth quickly. Larger cups need slower speeds; a general guide is to drop the speed as the diameter rises, and to follow the maker’s chart. Use a drill with a side handle for large holes, since a binding hole saw can twist the drill hard enough to hurt a wrist.
Before you cut into a wall or ceiling, switch off power at the breaker and check for wires, pipes and fixings behind the surface. Wear safety glasses and gloves rated for the task, and disconnect the drill or remove the battery when changing cups.
Common Hole Saw Mistakes
- Running at full speed. High speed overheats the teeth and dulls them quickly.
- Pushing too hard. Pressure binds the cup and can break teeth.
- Using wood cups on metal. Carbon steel teeth will not last on steel.
- Ignoring the plug. A jammed core leads to overheating and slow cutting.
- Skipping a backer board. The exit side will splinter without support.
Frequently Asked Questions
What are the best hole saws for wood?
For most woodworking, a bi-metal kit with coarse teeth and a deep cut, such as the Diablo 10-cup set, is excellent. For light drywall and softwood projects, a budget kit such as the ANGELSWORD 24-piece is enough.
What are the best hole saws for metal, wood and fiberglass?
A cobalt bi-metal kit like the EZARC M42 handles wood, plastic and thin metal. For fiberglass and abrasive materials, carbide-tipped cups last longer because fiberglass wears steel teeth quickly.
Which hole saws are best for stainless steel?
Carbide-tipped hole cutters are the usual recommendation for stainless steel because they hold up to heat and hardness. Bi-metal cups can cut thin stainless at low speed with cutting fluid, but they wear faster.
What are the best hole saws for electrical service?
Electricians generally want electrical-specific sizes, quick-change arbors and core ejection. The Spyder 17-piece kit and the Milwaukee Master Electrician’s kit are built around those needs, with the Klein carbide kit as a compact alternative for enclosures.
Can I use a hole saw in an impact driver?
Only if the arbor and cup are rated for impact use. Many hole saws are designed for drills, and impact blows can damage the arbor or the teeth. Check the maker’s instructions.
How do I get the plug out of a hole saw?
Use the slots in the cup to pry the plug out with a screwdriver, or pick a kit with an ejection feature like Spyder’s Rapid Core Ejection. Clearing the plug often keeps the saw cutting efficiently.
How many hole saws do I need?
Most homeowners are well served by a single 10 to 17-piece kit. Add individual cups in sizes you use heavily, such as 2-1/8 inch for door locks or 4-1/4 inch for recessed lights.
Which One Should You Buy?
For general woodworking and home renovation, choose the Diablo 10-cup bi-metal set. For electrical service and conduit work, the Spyder 17-piece kit is a strong choice, with the Milwaukee Master Electrician’s kit for heavy daily use and the Klein carbide set for enclosures. If you cut wood and thin metal on a moderate budget, the EZARC M42 kit is the value pick, while the HYCHIKA kit is the lowest-cost starting point. For drywall, softwood and large light openings, the ANGELSWORD 24-piece kit covers sizes up to 6 inches.
Whichever you buy, run the drill at a speed suited to the cup size, clamp your work, and wear eye protection.
Sources
- Manufacturer product pages and listings for Diablo, Spyder, Milwaukee, EZARC, HYCHIKA, ANGELSWORD and Klein Tools
- Tool maker guidance on hole saw speeds, feeds and materials
- Trade publications on electrical box and conduit knockout sizing
Last updated: October 2026
Related guides
Read next
More from Amazon
Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.
A free business account with business pricing and bulk-buying tools for work, shop or home office.
Create a business accountFree shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.
Start a Prime free trialAudiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.
Try Audible freeAd-free music streaming. Eligible new subscribers can start with a free trial.
Try Music Unlimited freeAs an Amazon Associate we earn from qualifying purchases.


Write Your Review
No reviews yet. Be the first to share your experience!