As an Amazon Associate I earn from qualifying purchases. This post may contain affiliate links at no extra cost to you.
A Skil table saw sits in an unusual spot in the market. You get a brand with genuine pedigree in portable power tools, a price that undercuts most professional options, and a feature set that covers the real demands of weekend builders, job-site carpenters, and homeowners tackling a deck or bookcase. The catch is that Skil spreads its lineup across several form factors — full-size 10-inch jobsite models, compact 8-1/4-inch portables, worm-drive configurations, and accessories — so choosing the right one depends entirely on the kind of cuts you actually make.
We compared these eight entries on published specifications, current pricing, and aggregated owner feedback from verified purchasers. What separates a good pick from a disappointing one usually comes down to three things: whether the saw handles the thickness and rip length you need without straining, whether the fence system stays true over repeated adjustments, and whether the total cost of the kit includes a workable stand. This roundup in 2026 covers every option so you can match a tool to your shop constraints without overbuying.
As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Product prices and availability are accurate as of the date shown and are subject to change.
Quick Picks
| Product | Best for | Price |
|---|---|---|
| SKIL TS6307-00 | Full-size 10-inch capability on a budget | $302.68 |
| SKIL TS6307-00 (Renewed) | Same saw at the lowest possible entry price | $199.99 |
| SKIL SPT99-11 | Heavy-duty ripping and dado work | $648 |
| SKIL TS6308-00 | Tight spaces where portability outweighs size | $249 |
| SKIL SPT99T-01 | Compact worm-drive power in a small footprint | n/a |
| SKIL TS6338-00 | Compact saw with an included folding stand | $259 |
| SKIL MS6305-00 | Crosscuts and angles on trim or framing | $279 |
| SKIL STZ6307 | Cleaner cuts on the TS6307 platform | $21.87 |
How We Picked
Four criteria drove our selection. First, amp draw and blade size together determine what the saw can handle in a single pass — a 15-amp motor with a 10-inch blade clears full sheet stock, while 8-1/4-inch portables trade depth for portability. Second, fence quality and travel are the single biggest source of owner complaints across this price tier, so we weighed that feedback heavily. Third, whether the listed price includes a usable stand or requires a separate purchase changes the real cost of ownership. Fourth, renewal and accessory options let buyers stretch a budget without sacrificing capability.
The 8 Best Skil Table Saw in 2026
SKIL TS6307-00 — 15 Amp 10-Inch Jobsite Table Saw with Folding Stand
The natural starting point for anyone who needs a full-size blade but refuses to spend professional-tier money. Owner reports consistently praise the straight factory fence and the folding stand’s stability on uneven subfloors. At roughly $303 you get the saw, the stand, and a 10-inch blade in one box.
- Pro: 10-inch blade gives 3-1/8-inch cutting depth and handles full sheet stock without a helper.
- Pro: Included folding stand stores flat and weighs little enough for a car trunk.
- Con: Fence travel and rigidity trail the SPT99-11 on long rip cuts.
Skip it if your work is limited to trim, plywood under 3/4-inch, or material you only crosscut — you are paying for capacity you will never use.
SKIL TS6307-00 (Renewed)
Identical saw, sold as a refurbished unit for a hundred dollars less. Renewed inventory on this model is plentiful, and buyer feedback indicates cosmetic wear far more often than mechanical issues. The stand and accessories may be missing or generic replacements on some units.
- Pro: Under $200 makes a full-size jobsite saw accessible for one-off projects.
- Pro: Same 15-amp motor and 10-inch blade geometry as the new unit.
- Con: Stand, blade, and push accessories are not guaranteed in the box.
Skip it if you are a professional who needs a documented tool history or a warranty transfer — the risk on a renewed unit without a serial record is on you.
SKIL SPT99-11 — 10 Inch Heavy Duty Worm Drive Table Saw with Stand
Skil’s flagship table saw and the one that gives competitors pause. The worm-drive motor delivers high torque at lower RPM, which owners describe as ideal for hardwoods, wet lumber, and dado stacks without bogging. The rack-and-pinion fence is the most rigid in this lineup.
- Pro: Worm-drive torque means the blade keeps spinning through dense cuts that stall direct-drive saws.
- Pro: Precision-ground cast-iron table and a fence system that holds calibration across repeated adjustments.
- Con: Weight and price make it impractical as a jobsite port-and-stow tool.
Skip it if you need something you can carry to a job site in one trip; this is a garage or workshop saw.
SKIL TS6308-00 — 15 Amp 8-1/4-Inch Compact Portable Jobsite Table Saw
A saw that trades blade diameter for a footprint small enough to ride shotgun on a crowded job. The 8-1/4-inch blade limits rip depth to roughly 2-1/2 inches, which is fine for dimensional lumber and most sheet goods but stops short of four-by stock. The stand is a separate purchase, pushing the realistic cost closer to the TS6307.
- Pro: Lightest full-featured Skil table saw here; easy to load and set up solo.
- Pro: Same 15-amp direct-drive motor as larger models, so it is unlikely to stall on softwood.
- Con: Stand sold separately means the listed price understates the true kit cost.
Skip it if you regularly rip 4/4 hardwood or thicker — the limited throat depth and blade height will slow you down.
SKIL SPT99T-01 — 8-1/4-Inch Portable Worm Drive Table Saw
Skil shrunk the worm-drive concept into a compact chassis. It is the least common unit here and pricing fluctuates widely. Owners note the torque advantage over direct-drive portables for the size, though the 8-1/4-inch blade caps cutting depth at about 2-1/2 inches.
- Pro: Worm-drive power in a portable case — useful for dense hardwood crosscuts on site.
- Pro: Compact enough to fit in a small truck bed without a dedicated rack.
- Con: Pricing inconsistency makes it hard to confirm current value against the TS6338.
Skip it if you cannot find a confirmed retailer price; the TS6338 with folding stand at $259 is the easier buy when stock or pricing is uncertain.
SKIL TS6338-00 — 15 Amp 8-1/4-Inch Compact Portable Jobsite Table Saw with Folding Stand
The one-box solution for portability. For twenty dollars more than the bare TS6308 you get a matching folding stand, making it arguably the better starter saw for a homeowner or apprentice. The 15-amp direct-drive motor and gravity-rise stand design draw consistent praise in owner reviews.
- Pro: Stand included at a fair price eliminates the accessory surprise.
- Pro: Lightweight design suits apartment balconies and garage corners where permanent bench space is lacking.
- Con: 8-1/4-inch blade limits full rip cuts through 2x material in a single pass.
Skip it if you need dado or through-cut capability beyond 2-1/2-inch thickness; step up to the 10-inch models instead.
SKIL MS6305-00 — 10-Inch Dual Bevel Sliding Compound Miter Saw
Not a table saw, but it appears in this list because many buyers shop for both tools at once. The 10-inch sliding compound design handles wide crown molding and framing without a second setup. For crosscut-heavy work — trim, framing, decking — it outperforms any table saw here on angle repeatability.
- Pro: Sliding rails extend crosscut capacity to wide boards that a fixed miter saw cannot reach.
- Pro: Dual bevel means no flipping stock for compound crown angles.
- Con: Useless for rip cuts; it is a crosscut-only tool and cannot replace a table saw.
Skip it if you do not make angled crosscuts regularly; save the money for the TS6307.
SKIL STZ6307 — Zero Clearance Table Saw Insert Plate for TS6307-00
The single most cost-effective upgrade for the TS6307 platform. A zero-clearance insert supports fibers immediately beside the blade, reducing tear-out on plywood veneers and painted boards. Installation takes under five minutes and requires no modification to the saw.
- Pro: Visible improvement in cut quality on veneered plywood and melamine without changing the blade.
- Pro: Compatible specifically with the TS6307, so no fitting guesswork.
- Con: Single-use design — once the slot is widened from use or a dado cut, you need a replacement.
Skip it only if you already own a compatible insert from another brand or fabricate your own.
Buying Guide
Blade Size and Cutting Depth
A 10-inch blade gives roughly 3-1/8 inches of cutting depth at 90 degrees and 2-1/4 inches at 45 degrees. An 8-1/4-inch blade drops to about 2-1/2 inches and 1-7/8 inches respectively. If you rip full 4/4 stock or make dados, the 10-inch platform is necessary. For dimensional framing lumber and sheet goods up to 3/4-inch, the compact 8-1/4 saws are adequate and far easier to transport.
Fence Systems and Their Impact on Accuracy
The worm-drive SPT99-11 uses a rack-and-pinion fence with a cast-iron rail — the most accurate option here. Jobsite models rely on extruded-aluminum fences that are adequate for framing but can drift under lateral pressure during long rips. Owner complaints about the lower-priced saws almost always trace back to fence slop or clamp mechanisms that lose bite. Factor in the zero-clearance insert as a companion purchase because it also reduces the lateral force on the workpiece.
Stand Inclusion and Total Cost of Ownership
Skil prices vary by whether a folding stand is bundled. The TS6307 includes one; the TS6308 does not; the TS6338 does for only ten dollars more than the bare saw. When comparing, add the stand cost to every listing that omits one. A saw without a stable stand at working height is a saw you will end up returning or setting on a sawhorse.
Our Verdict
Top pick: The SKIL TS6307-00 is the best skil table saw overall for most buyers — full-size capacity, a folding stand included, and a price under $305. It handles sheet goods, dado stacks, and rip cuts without apology.
Budget pick: The renewed TS6307-00 at just under $200 is the value leader, provided you accept a generic or missing stand and no warranty transfer.
When another wins: If your work is almost entirely crosscuts and angles on trim or framing, the MS6305-00 sliding compound miter saw at $279 is the more capable tool for that single purpose and eliminates the need for a dedicated table saw setup.
FAQ
Can a compact 8-1/4-inch Skil table saw dado a workpiece?
Physically it can accept a dado stack, but the motor and arbor were not designed for sustained dado loads. You will see more burning and reduced depth of cut compared to the 10-inch models. For occasional shallow dados it is workable; for full-depth production it is a poor choice.
Is the renewed TS6307 worth buying over a new one?
If you need a jobsite saw for occasional use and accept a non-standard or missing stand, the hundred-dollar savings makes it hard to argue against. The motor and blade geometry are identical. The risk is limited to cosmetic wear and unclear prior use.
What is the difference between a worm drive and a direct drive table saw?
A worm drive uses a threaded gear to multiply torque at lower blade speed, which keeps the blade spinning through dense material without stalling. Direct drive connects the motor to the arbor with a belt or gear at higher RPM, cutting faster in softwoods but losing bite in hardwoods. Worm drives also add weight and cost.
Do I really need a zero clearance insert on a budget table saw?
You do not strictly need one, but it is the cheapest upgrade with the largest measurable effect on cut quality. It eliminates the gap around the blade that causes veneer tear-out on plywood and melamine. At under $22 on Amazon, it costs less than a set of good blades.