As an Amazon Associate I earn from qualifying purchases. This post may contain affiliate links at no extra cost to you.
A Doall band saw is a precision machine that deserves equally precise maintenance. When the urethane tires on the wheels degrade, crack, or lose their grip, your blade tracking goes unstable, your cuts wander, and the entire machine stops earning its keep. Replacement tires and blades are consumables, but choosing the wrong size, material grade, or fitment style turns a quick weekend swap into a frustrating afternoon of returns.
The market for Doall-specific band saw parts is narrow enough that some listings serve multiple models while others target a single frame with surgical accuracy. The gap between a well-matched tire set and a generic aftermarket part shows up in blade life, cutting consistency, and how long the assembly actually lasts before you are back on the shopping page. This roundup pulls together the eight options that owners consistently recommend for Doall frames in 2026, comparing published specs, fitment notes, and real-world feedback to help you buy the right part the first time.
As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Product prices and availability are accurate as of the date shown and are subject to change.
Quick Picks
| Product | Best for | Price |
|---|---|---|
| Urethane Tires for Doall 16 Inch Pica (2 Pack) | Owners of the Doall 16″ Pica seeking a glue-free install | $87.92 |
| Urethane Tires for Doall X 1 1/2″ 16″ (2 Pack) | Owners who want a heavy-duty build on a tight budget | $89.98 |
| Doall Model 16-2a Ultra Duty Tires (2 Set) | Industrial users running the 16-2a at high duty cycles | $135.44 |
| DEWALT 20V MAX Band Saw (DCS374B) | Metalworkers and plumbers needing a portable handheld cutter | $289 |
| Timber Wolf 120″ Band Saw Blade (3/4″ 2/3 TPI) | Framing DoAll 16-3 and similar wide-wheel machines | $52.10 |
| Blue Ultra Duty Tires for Doall 1612-3 (2 Pack) | Heavy users who want the color-coded ultra-duty grade | $135.44 |
| Urethane Tires for DOALL 3612-3 (3 Pack) | Owners of the 3612-3 who prefer three-tire sets for redundancy | $136.61 |
| Urethane Tires for Doall Metalmaster 16″ | Metalmaster owners who want the lightest, cheapest correct tire | $82.43 |
How We Picked
We prioritized exact model fitment first because a tire that is a half-inch off in width or diameter will not track properly on a Doall wheel, regardless of how good the urethane compound is. Second, we weighed material grade against the intended duty cycle—ultra-duty and super-duty compounds justify their price only if you are running resaw stock or hardwoods daily, not occasional hobby cuts. Third, adhesive-free designs scored higher because they simplify replacement and reduce the risk of uneven bonding that causes blade vibration. Finally, we factored in owner-reported longevity and whether the listing clearly identifies the specific Doall model it targets versus casting a wide net across multiple brands.
The 8 Best Doall Band Saw in 2026
Urethane Band Saw Tires Fits Doall 16 Inch Pica – 2 Pack Heavy Ultra Urethane (No Adhesive)
This two-pack targets owners of the Doall 16-inch Pica frame who want a straightforward, no-fuss tire swap. The urethane compound is rated as heavy ultra-duty, meaning it resists compression set better than economy tires while remaining pliable enough to stretch over the wheel without heat guns or solvents. Owners praise the clean fit and the absence of adhesive, which eliminates cleanup on the wheel face. Made in the USA, the pair costs under ninety dollars and typically lasts two to three years under regular shop use.
- Pro: Adhesive-free installation saves significant time on the swap.
- Pro: Heavy ultra-grade urethane holds shape well under sustained cutting loads.
- Con: Only fits the 16-inch Pica; owners of other Doall frames must look elsewhere.
Skip this if your wheel diameter is anything other than sixteen inches or if you need a tire for the upper wheel on a three-tire configuration.
Urethane Band Saw Tires Fits Doall X 1 1/2 Inch 16 Inch Band Saw Tire – 2 Pack Heavy Duty
Almost identical in construction to the Pica set above, this pair specifies a one-and-a-half-inch tire width for the sixteen-inch Doall X frame. The slightly narrower profile suits machines with less generous wheel flanges. At a price just over twenty cents above the Pica option, the value is nearly indistinguishable. The deciding factor here is purely dimensional: match the width to your wheel groove, and you get the same adhesive-free, USA-made urethane build.
- Pro: The 1.5-inch width seats cleanly on narrower wheel faces without trimming.
- Pro: Consistent pricing with the sister Pica listing makes comparison shopping easy.
- Con: Listing title is dense and could confuse buyers who do not verify width against their wheel.
Skip this if your Doall X wheel grooves measure wider than 1.5 inches, as the tire will shift under load.
Doall Model 16-2a Urethane Band Saw Tires Ultra Duty .125 – 2 Tire Set Replacement Part
This set names the exact machine model—16-2a—and specifies a 0.125-inch gauge, which tells you these tires are built for a shallow groove wheel. The ultra-duty compound is formulated for continuous industrial resawing rather than intermittent hobby cuts. The price sits well above consumer tire sets, reflecting that durability margin. Owners running this frame in production shops report noticeably longer tire life between replacements compared to generic urethane options.
- Pro: Precise model and gauge identification eliminates guesswork on fitment.
- Pro: Ultra-duty formulation resists heat buildup during long resaw sessions.
- Con: The 0.125 gauge is specific to shallow-groove wheels; wrong groove depth means poor seating.
Skip this if you own a Doall model other than the 16-2a or if your wheel groove is deeper than 0.125 inches.
DEWALT 20V MAX Band Saw 5″ Cutting Capacity – Portable Bare Tool (DCS374B)
This entry is categorically different from the tire and blade options above. The DEWALT DCS374B is a handheld, battery-powered band saw designed for portable metal cutting, pipe work, and demolition. It does not replace a stationary Doall woodworker; it solves a different problem entirely. Its inclusion in a Doall roundup is only useful if you also need a mobile cutting tool that complements a shop-based band saw. At $289 bare-tool, it requires a separate 20V MAX battery.
- Pro: Five-inch cutting capacity handles large-diameter pipe and bar stock without a vise.
- Pro: Integrated hang hooks make on-site storage practical in tight job conditions.
- Con: Not a woodworker; zero relevance if your need is replacing tires or blades on a stationary Doall.
Skip this entirely if your problem is a stationary Doall band saw maintenance issue rather than needing a portable metal cutter.
Timber Wolf 120″ Band Saw Blade by PS Wood – 120″ x 3/4″ x 2/3 TPI
While every other item on this list is a tire, this is the blade itself. The 120-inch length with 3/4-inch width and two-thirds teeth-per-inch configuration is engineered to fit the DoAll Model 16-3 among other frames. At just over fifty dollars, it is the cheapest item in the roundup and the only consumable you must replace on a fixed interval regardless of tire condition. Owners report clean cuts in resaw stock and stable tracking when paired with properly seated urethane tires.
- Pro: Multi-model compatibility list reduces search effort for owners of less common Doall variants.
- Pro: Aggressive price point makes blade replacement a low-stakes decision.
- Con: The coarse 2/3 TPI is not ideal for thin stock or delicate hardwood veneers.
Skip this if you need a finer tooth count for thin-kerf or decorative work; the 2/3 TPI is tuned for resawing and green lumber.
2 Blue Ultra Duty Urethane Band Saw Tires For Doall Model 1612-3 – Replacement Part
Blue-colored urethane signals a specific compound grade within this seller’s lineup, and the 1612-3 model designation is precise. This two-pack is the industrial counterpart to the consumer tire sets listed earlier, built for shops running the 1612-3 at high duty cycles. Pricing matches the 16-2a set at $135.44, which is reasonable for ultra-duty urethane that resists flattening under constant tension. The color also helps visually inspect wear during routine checks.
- Pro: The blue color coding aids quick visual inspection for uneven wear or compression.
- Pro: Ultra-duty compound maintains consistent blade tracking over extended production runs.
- Con: Single-model fitment means cross-shopping is required if you operate multiple Doall frames.
Skip this if your 1612-3 sees only occasional hobby use; a consumer-grade tire will serve equally well at half the price.
Urethane Band Saw Tires Fits DOALL 3612-3 – 3 Pack Heavy Duty (No Adhesive)
The three-pack configuration distinguishes this listing from every other tire option here. The Doall 3612-3 apparently uses a three-tire arrangement, and buyers receive all three in one package. The heavy-duty urethane compound is the same grade found in the two-packs above, with no adhesive required. At $136.61 for three tires versus $135.44 for two on the 16-2a set, the per-tire cost is actually lower, making this a fair deal for owners of this specific frame.
- Pro: Complete three-tire set in one purchase eliminates the risk of mismatched tire ages.
- Pro: Competitive per-unit pricing compared to other ultra-duty options in the list.
- Con: Only useful if your machine genuinely runs three tires; buying a spare is dead weight otherwise.
Skip this if your 3612-3 frame has been converted to a two-tire setup or if you are not certain about the tire count.
Urethane Band Saw Tires Fits Doall Metalmaster 16″ – Super Duty Bandsaw Wheel Tires
The cheapest tire option on the list at $82.43, this set targets the Metalmaster 16-inch—a heavier machine that cuts metal stock. The super-duty compound is formulated to resist the heat and vibration unique to metal-cutting operations. Owners of Metalmaster frames rarely find dedicated tire replacements, so a listed fitment specifically for this machine is valuable even at this price. Made in the USA, the tires install without adhesive.
- Pro: Purpose-built for metal-cutting heat and vibration resistance, not repurposed woodworking compound.
- Pro: Lowest tire-only price in the roundup while still being a model-specific fitment.
- Con: Only fits the Metalmaster 16″; woodworker Doall frames use different dimensions.
Skip this if your Metalmaster is a different size than 16 inches or if you are searching for woodworking band saw tires.
Buying Guide
Confirm the Exact Model and Wheel Dimensions
Doall produced multiple band saw frames over decades, and tire widths range from about one inch to one and a half inches with diameters spanning fourteen to twenty-one inches. Before purchasing, measure your wheel groove width with a caliper and note the outer diameter. A tire that is even a quarter-inch wide will creep off the flange under tension, and one that is too narrow will not center the blade.
Match the Duty Grade to Your Usage
Consumer urethane tires handle hobby woodworkers cutting occasionally per week. Heavy-duty compounds add resistance to compression set for shops running daily. Ultra-duty and super-duty grades target industrial resawing or metal cutting where heat and vibration are sustained. Paying the premium only makes sense if your usage pattern matches the grade; over-buying wastes budget, and under-buying shortens tire life.
Prioritize Adhesive-Free Designs
Tires that bond with contact cement require perfect surface preparation and even application. Any gap or overlap creates an imbalance that translates to blade wobble. Adhesive-free urethane tires stretch directly over the wheel rim and rely on friction to stay seated. Installation is faster, removal is cleaner, and there is no cure-time waiting before you resume cutting.
Our Verdict
The Doall Model 16-2a Ultra Duty 0.125 tire set is our top pick for production shops because it names a specific model, specifies a precise gauge, and uses a compound rated for continuous industrial load. For budget-conscious owners who simply need a reliable replacement without paying the ultra-duty premium, the Urethane Tires for Doall 16 Inch Pica at $87.92 delivers heavy-grade urethane and adhesive-free installation at the best value. If you run the 3612-3 and want all three tires replaced simultaneously for uniform wear, the 3 Pack at $136.61 is the only option here that ships a complete set in one order.
FAQ
How often do Doall band saw tires need replacement?
Under regular woodworking use, expect five to seven years from heavy-grade urethane and three to four years from lighter compounds if the saw sits idle between sessions. Compression set from constant blade tension is the primary failure mode, so a tire can look intact externally while already losing its round profile internally.
Can I use a non-Doall-brand tire on a Doall frame?
Yes, provided the tire width, outer diameter, and groove depth match your wheel exactly. Several listings above fit Doall frames using generic urethane compounds. The risk with any brand is inconsistent dimensional tolerance, so verify measurements against your own wheel before ordering.
What is the difference between urethane and rubber band saw tires?
Urethane tires resist compression set far better than rubber, maintain their round shape longer under blade tension, and do not deteriorate from oil or coolant exposure on metal-cutting saws. Rubber is cheaper and more flexible during installation but flattens over time, causing blade tracking instability.
Do I need to replace both tires at the same time?
Replacing tires as a matched set is strongly recommended because a new tire and a compressed old tire on opposite wheels create uneven tracking forces that pull the blade off-center. On three-tire machines, replace all three simultaneously for the same reason.