Key takeaways
- A closer look at the Zurn Wilkins 34-720A pressure vacuum breaker assembly in 3/4 inch, covering backflow protection, install and plumbing use.
What's inside
As an Amazon Associate I earn from qualifying purchases. This post may contain affiliate links at no extra cost to you.
Home › Product Guides › Zurn Wilkins 720A Pressure Vacuum Breaker Review Guide
Backflow protection is one of those plumbing topics that only gets attention when a water utility letter arrives, an inspector flags a sprinkler system, or a freeze cracks the assembly sitting beside the house. A pressure vacuum breaker mounts on a supply line and stops contaminated water from being siphoned back into the clean drinking water supply when pressure in the line drops. It is a compact device with a serious job, and on irrigation systems it works outdoors in all weather, season after season.
The Zurn Wilkins 34-720A is a 3/4 inch pressure vacuum breaker assembly from the 720A line, made for point-of-use backflow protection on lines such as residential irrigation systems. This review covers what the assembly does, which details its name confirms and which it leaves unstated, who it suits, who should pick a different style of backflow preventer, and how it compares with the alternatives most buyers consider before ordering a replacement.
As an Amazon Associate, we earn from qualifying purchases.
Quick Answer
The Zurn Wilkins 34-720A is a 3/4 inch pressure vacuum breaker assembly made for backflow protection on irrigation and similar supply lines. It suits homeowners and installers replacing a worn breaker or adding code-minded protection to a sprinkler system. Buyers who need protection for a main line or a larger pipe size should choose a different assembly.
Key Specs
| Spec | Detail |
|---|---|
| Brand | Zurn Wilkins |
| Model | 34-720A |
| Series | 720A |
| Product type | Pressure vacuum breaker assembly |
| Size | 3/4 inch |
| Body material | not stated |
| Connection type | not stated |
| Maximum working pressure | not stated |
| Temperature range | not stated |
Who It Is For
This assembly fits homeowners with an in-ground sprinkler system fed by a 3/4 inch line, especially anyone replacing a breaker that has started leaking, chattering, or splitting after a cold snap. Freeze damage is the classic reason these devices get swapped, and a like-for-like replacement in the same size is usually the fastest route back to a working, protected system. It also suits landscapers and plumbers who service residential irrigation and want a recognized brand name on the truck, since utilities and inspectors tend to look for identifiable, serviceable assemblies rather than unmarked hardware. Property managers handling several homes with similar irrigation setups may also appreciate standardizing on one common size and model.
Who Should Skip
Skip this model if your irrigation line is a larger diameter, since a 3/4 inch assembly cannot serve a line sized above it. Also skip it if your local code calls for a different class of protection on your setup, such as a reduced pressure principle assembly for higher hazard applications, because a pressure vacuum breaker covers a specific category of risk. It is also the wrong pick for indoor installations or lines that stay under constant downstream pressure in ways this device style is not intended to handle. Finally, if the existing breaker body is sound and only the internal parts are worn, a repair approach may solve the problem without replacing the whole assembly.
How It Compares to Alternatives
Against unbranded pressure vacuum breakers, the main draw of the Zurn Wilkins name is accountability: a known manufacturer, a defined model number, and a realistic path to documentation and replacement internals later. Generic assemblies can look similar on the outside, but identifying parts for them years down the road is often guesswork. Compared with a simple atmospheric vacuum breaker, a pressure vacuum breaker assembly is a more complete, testable style of device and is the format many irrigation codes expect to see. Compared with double check valve assemblies and reduced pressure principle assemblies, it sits in a different protection category with different installation rules, including placement above the highest point of the system it protects. The right choice depends on hazard level and local code, not on one device being universally better.
FAQ
What does a pressure vacuum breaker protect against?
It guards against backsiphonage, the reversal that can pull water from an irrigation line back toward the household supply when pressure drops. Sprinkler lines can carry fertilizer residue, soil, and standing water, so keeping that water out of the drinking supply is the entire point of the device.
Where should a pressure vacuum breaker be installed?
This style of breaker is typically installed outdoors, upright, and above the highest sprinkler head or outlet on the system it protects, so the venting action works as intended. Clearance around the assembly also helps with inspection and winterizing. Local plumbing codes set the exact requirements, so checking them before installation is wise.
What size line does the 34-720A fit?
The product name states a 3/4 inch size, so it is built for 3/4 inch supply lines. Measuring your existing line or reading the size marked on the assembly being replaced is the simplest way to confirm a match before ordering.
How is this different from a double check assembly?
A pressure vacuum breaker uses a vented design intended for backsiphonage protection and must sit above the system it serves. A double check assembly uses two check valves in a different configuration and follows different placement and testing rules. Which one belongs on a given property depends on the application and the local code.
Final Verdict
The Zurn Wilkins 34-720A is a straightforward, brand-name answer for 3/4 inch irrigation backflow protection, well matched to replacements and new sprinkler installs that call for a pressure vacuum breaker. Its name confirms the essentials, brand, model, device type, and size, while details such as body material and pressure limits are not stated and should be confirmed against the manufacturer documentation for your installation. Buyers whose lines, hazard category, or local code point to a different device class should follow that guidance instead. For the standard residential irrigation scenario, it covers the brief.
Related guides
Read next
- Best Electrical Panel and Breaker Box Setup Guide Picks
- Best Pressure Washer Surface Cleaners: 5 Top Picks
- Best Cordless Leaf Vacuum Mulchers for Yard Cleanup 2026
- Best Cordless Pressure Washers That Draw From a Bucket
- NEWISHTOOL Car Wrap Tools PPF Installation Kit Review
- Best Wiring Panel and Rail Kit Buying Guide Picks List
More from Amazon
Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.
A free business account with business pricing and bulk-buying tools for work, shop or home office.
Create a business accountFree shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.
Start a Prime free trialAudiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.
Try Audible freeAd-free music streaming. Eligible new subscribers can start with a free trial.
Try Music Unlimited freeAs an Amazon Associate we earn from qualifying purchases.

Write Your Review
No reviews yet. Be the first to share your experience!