Key takeaways
- Sort screws and fasteners with the best small parts organizers: drawer cabinets and stackable bins with clear drawers, dividers and wall-mount options.
What's inside
As an Amazon Associate I earn from qualifying purchases. This post may contain affiliate links at no extra cost to you.
Home › Product Guides › Best Small Parts Organizers for Screws and Hardware
Loose screws, bolts, washers and wire nuts have a way of migrating into coffee cans, junk drawers and the corners of every toolbox in the shop. A small parts organizer ends that scatter. Benchtop drawer cabinets and stackable bin units give every fastener size its own labelled compartment, so the screw you need is visible through a clear drawer front instead of buried under three other sizes.
The five organizers below cover the main formats a workshop needs: high-count drawer cabinets for full fastener libraries, mixed-drawer cabinets that pair small compartments with deeper ones, a wide low-profile unit for under-shelf spaces, and lighter cabinets that move between bench and wall. Every pick is a benchtop or wall-mount unit for screws, fasteners and hardware, described from published specifications only.
As an Amazon Associate, we earn from qualifying purchases.
Quick answer
For most workshops, the Akro-Mils 10164 is the strongest all-round pick: 64 clear drawers in a 20-inch frame that stacks or wall-mounts. If you also store bulkier hardware, the Akro-Mils 10144 mixes large and small drawers in the same footprint. The Craftsman CMST40739 suits low, wide spaces, the Stack-On DS-39 adds no-spill drawer stops, and the Stalwart 39-drawer cabinet is the budget route to the same layout.
The best small parts organizers
Akro-Mils 10164 64-Drawer Plastic Parts Storage Cabinet
The 10164 is the high-count option in the Akro-Mils cabinet line, packing 64 uniform small drawers into a frame that measures 20 inches wide, 6-3/8 inches deep and 15-13/16 inches tall. That density suits a full fastener library: one drawer per screw size, length and drive type, with room left over for anchors, washers and electrical terminals. The frame is high-impact polystyrene, the drawers are clear so contents read at a glance, and the cabinet is made in the USA.
Each drawer measures 5-1/4 by 1-11/16 by 1-1/2 inches inside, a good match for screws up to roughly 3 inches plus their washers. The cabinet stacks with other units from the same line and has mounting points for wall hanging, so a fastener wall can grow drawer by drawer. This is the premium pick for anyone whose hardware collection has outgrown a single mixed cabinet.
Specs
– Model: 10164
– Drawers: 64, all small, clear fronts
– Overall dimensions: 20 x 6-3/8 x 15-13/16 in
– Drawer inside dimensions: 5-1/4 x 1-11/16 x 1-1/2 in
– Material: High-impact polystyrene
– Mounting: Stackable, wall-mountable
– Weight: Not stated
Akro-Mils 10144 44-Drawer Plastic Parts Storage Cabinet
The 10144 uses the same 20-inch frame as the 64-drawer model but trades some small drawers for large ones, giving 44 drawers in two sizes. The large drawers, about 6 by 4-9/16 by 2-3/16 inches, swallow bulkier hardware that small compartments cannot: hinge packs, long lag screws, plumbing fittings and small hand tools. The small drawers handle the everyday screw and bolt sizes. Dividers are included, so a wide drawer can split into two or three narrower cells.
Like its sibling, the frame is high-impact polystyrene with clear drawer fronts, and the cabinet stacks or wall-mounts. At 6.5 pounds empty, it is light enough to move between bench and wall while you settle on a layout. Choose this one over the 10164 when your hardware mix includes chunkier pieces alongside the fasteners.
Specs
– Model: 10144
– Drawers: 44, large and small mix, clear fronts
– Overall dimensions: 20 x 6 x 16 in
– Dividers: Included
– Material: High-impact polystyrene
– Mounting: Stackable, wall-mountable
– Weight: 6.5 lb
Craftsman CMST40739 Large Storage Organizer, 39 Compartment
The Craftsman organizer takes a different shape from the tall cabinets above: a wide, low bin system, listed at 14.2 inches wide, 6.0 inches deep and 8.7 inches tall, that fits under a shelf or on a shallow bench where a tall cabinet would crowd the work area. Its 39 transparent drawers mix small and large sizes, and the structure is heavy-duty polypropylene.
The unit stacks with additional units and can also wall-mount, so the low profile does not cap capacity. Transparent drawers keep contents visible, and the black frame suits a bench that already carries Craftsman storage. This is the mid-range pick for workshops with more horizontal room than vertical room.
Specs
– Model: CMST40739
– Drawers: 39, small and large mix, transparent
– Overall dimensions: 14.2 x 6.0 x 8.7 in (as listed)
– Material: Polypropylene structure, plastic drawers
– Mounting: Stackable, wall-mountable
– Included: 39-drawer bin system, 1 unit
– Weight: 2.13 kg (as listed)
Stack-On DS-39 39-Drawer Storage Cabinet
The DS-39 splits its 39 drawers into 30 medium and 9 large, a layout that maps well onto a working fastener collection: medium drawers for the common screw and bolt sizes, large drawers for the odd fittings and bulk packs. The see-through drawers carry no-spill tab stops, so a drawer pulled out in a hurry stays in the frame instead of dumping its contents across the bench, and wide ribbed pulls are easy to grip.
The gray frame measures 14-7/8 inches wide, 6-3/8 inches deep and 18-1/2 inches tall, with supports across the frame for extra strength. It stands on a bench or counter top, or mounts to the wall. For shops that open and close drawers all day, the tab stops are the detail that earns this cabinet its place.
Specs
– Model: DS-39-3
– Drawers: 39 (30 medium, 9 large), see-through
– Overall dimensions: 14-7/8 x 6-3/8 x 18-1/2 in
– Drawer stops: No-spill tab stops
– Frame color: Gray
– Mounting: Wall-mountable or benchtop
– Weight: Not stated
Stalwart 39-Drawer Plastic Small Parts Organizer
The Stalwart cabinet is the budget way into the same 39-drawer format: 9 large drawers and 30 small ones in an impact-resistant polypropylene frame. The large drawers measure 4.2 inches wide by 6 inches deep, the small ones 2 inches wide by 6 inches deep, and removable dividers are included so the small drawers can split further for tiny parts such as set screws, O-rings and electronic components.
Clear drawers with finger pulls keep contents visible, and built-in keyholes on the back of the frame allow wall mounting; on the bench it measures 15 inches wide, 6.2 inches deep and 18.5 inches tall. No assembly is required. For a first fastener cabinet, or a second unit dedicated to one job type, this is the sensible spend.
Specs
– Model: 75-TS2006
– Drawers: 39 (9 large, 30 small), clear
– Overall dimensions: 15 x 6.2 x 18.5 in
– Material: Polypropylene
– Dividers: Removable, included
– Mounting: Benchtop or wall-mount via keyholes
– Weight: 6.24 lb
How to choose
Count your categories first. A fastener library grows by size, length and drive type, so tally the distinct items you own now and add headroom; that number decides whether a 39-drawer cabinet suffices or the 64-drawer Akro-Mils makes more sense. If part of the collection is bulky, such as hinges, fittings or long lag screws, a mixed-drawer cabinet like the 10144 or the 39-drawer units will serve better than uniform small drawers.
Measure the space, not just the bench. Most of these cabinets are about 6 inches deep, so they sit comfortably on a bench or a shelf, and all five picks can wall-mount to free the surface entirely. Check the height under any shelf above the bench: the Craftsman unit is the one shaped for tight vertical gaps, while the Stack-On and Stalwart cabinets stand over 18 inches tall.
Look at drawer details next. Clear fronts save labelling for the sizes you reach for daily, dividers let one drawer hold two lengths of the same screw, and tab stops, as on the Stack-On, prevent spills when a drawer is yanked. Finally, plan for growth: stackable frames from the same line keep a wall of cabinets uniform as the collection expands.
Who should skip
Skip these cabinets if your storage problem is whole tools rather than small parts; chargers, drills and saws belong in a tool chest or a wall rack, not in 2-inch drawers. If you need to carry fasteners to a job site daily, a lidded portable organizer with a handle is a better fit than a benchtop cabinet whose drawers are open at the top. And if your hardware is mostly long stock, such as threaded rod, chain or rope, open bins or hooks will serve you better than any drawer cabinet here.
FAQ
Can these organizers be wall-mounted?
Yes. All five picks can wall-mount as well as sit on a bench: the Akro-Mils cabinets and the Craftsman unit are built to stack or hang, the Stack-On mounts to the wall or stands on a counter, and the Stalwart frame has keyholes on its back for hanging.
How many drawers do I need for a home workshop?
A 39-drawer cabinet covers most home collections, giving each common screw, bolt and anchor size its own drawer with a few spares. If you keep many lengths of the same sizes, or add electrical and plumbing small parts, the 64-drawer Akro-Mils 10164 gives the extra room.
Are the drawers removable?
The drawers on these cabinets slide out for filling and sorting, and the Stalwart drawers come with removable dividers for splitting a drawer into smaller cells. Dividers are also included with the Akro-Mils 10144, so wide drawers can hold two or three part types.
What is the difference between a drawer cabinet and a bin organizer?
A drawer cabinet keeps each compartment inside a frame, with the drawer sliding open from the front, which suits a fixed bench or wall. Bin organizers use open or lift-out bins that you can carry to the work; the Craftsman pick here is a drawer take on that bin-system idea, mixing small and large drawers in one low frame.
Final verdict
For a permanent fastener library, the Akro-Mils 10164 is the pick: 64 clear drawers, a stackable frame and room to grow. Mixed collections are better served by the 10144, while the Craftsman CMST40739 fits low spaces, the Stack-On DS-39 protects against spills with its tab stops, and the Stalwart delivers the same 39-drawer layout on a budget. Any of the five will beat the coffee can.
Related guides
Read next
- Best Ultrasonic Cleaners for Workshop Parts and Tools
- Best Pegboard Organizers for Workshop Tool Storage
- 5 Best Small Surface Cleaners for Patios and Decks
- Best Magnetic Parts Trays: 5 Picks for the Workshop
- Best Masonry Drill Bits: 5 Carbide Sets for Every Drill
- Best Hand Planes for Woodworking, from Smoothers to Blocks
More from Amazon
Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.
A free business account with business pricing and bulk-buying tools for work, shop or home office.
Create a business accountFree shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.
Start a Prime free trialAudiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.
Try Audible freeAd-free music streaming. Eligible new subscribers can start with a free trial.
Try Music Unlimited freeAs an Amazon Associate we earn from qualifying purchases.





Write Your Review
No reviews yet. Be the first to share your experience!