Our Top Picks
SKIL 15 Amp 7-1/4 Inch Circular Saw with7-1/4 Inch (Pack of 1)14.2 x 9.8 x 8.5 inches8.7 poundsCheck on Amazon
What's inside
- Quick Comparison
- Corded or Cordless?
- 1. DeWalt DCS570B 20V Max Circular Saw
- 2. Milwaukee 2732-20 M18 Fuel Circular Saw
- 3. Makita XSH06Z 18V LXT Circular Saw
- 4. Skil 5280-01 Circular Saw
- 5. Bosch CS10 Corded Circular Saw
- Blades Make or Break the Saw
- Safety Basics
- Making Straighter, Cleaner Cuts
- How to Choose
- Common Mistakes
- FAQ
- Conclusion
- Quick Comparison
- Corded or Cordless?
- 1. DeWalt DCS570B 20V Max Circular Saw
- 2. Milwaukee 2732-20 M18 Fuel Circular Saw
- 3. Makita XSH06Z 18V LXT Circular Saw
- 4. Skil 5280-01 Circular Saw
- 5. Bosch CS10 Corded Circular Saw
- Blades Make or Break the Saw
- Safety Basics
- Making Straighter, Cleaner Cuts
- How to Choose
- Common Mistakes
- FAQ
- Conclusion
As an Amazon Associate I earn from qualifying purchases. This post may contain affiliate links at no extra cost to you.
Home › Reviews › Best Circular Saws for DIY and Remodeling: Reviewed
A 7-1/4 inch circular saw handles most cutting jobs around the house, from plywood sheets to framing lumber. The DeWalt DCS570 and Milwaukee M18 Fuel are strong cordless options, the Skil 5280-01 is a dependable corded saw, and the Makita and Bosch models offer refined alternatives. Choose between cordless freedom and corded power.
Quick Comparison
| Pick | Best for | Key feature |
|---|---|---|
| DeWalt DCS570B 20V Max Circular Saw | Cordless job-site cutting | Brushless motor, bevel up to 50 degrees |
| Milwaukee 2732-20 M18 Fuel Circular Saw | Demanding cordless work | High power, strong battery runtime |
| Makita XSH06Z 18V LXT Circular Saw | Smooth cordless cutting | Light and well balanced |
| Skil 5280-01 Circular Saw | Budget corded saw | No battery, constant power |
| Bosch CS10 Corded Circular Saw | Accurate, comfortable cuts | Clear sightline, solid build |
Corded or Cordless?
Corded saws give you steady power without worrying about battery life, usually at a lower price. They are ideal for a garage workshop or long cuts through thick lumber. Cordless saws are more convenient on a roof, in the yard or anywhere without an outlet, and modern brushless motors are impressively capable. The catch is that a cordless saw needs a decent battery, ideally 5Ah or larger, for sustained cutting, and each battery adds cost. If you already own batteries from one brand, a bare tool in that platform is a cost-effective way to add a saw.
1. DeWalt DCS570B 20V Max Circular Saw
The DeWalt DCS570B 20V Max circular saw is a popular cordless pick, with a brushless motor, a metal shoe and a bevel range that suits most cuts. It is available as a bare tool or in a kit. It works well for decks, framing and shed projects. The negatives are weight with a large battery and an average dust blower. Check that the saw ships with a decent blade, or plan to upgrade the blade.
2. Milwaukee 2732-20 M18 Fuel Circular Saw
The Milwaukee 2732-20 M18 Fuel circular saw is aimed at demanding users who want power close to a corded saw. It slices through thick lumber with confidence, and the brushless motor and electronics manage heat and battery use well. It is the pick for serious remodels. The drawbacks are price and heft. If you are starting from scratch, remember to price the batteries and charger.
3. Makita XSH06Z 18V LXT Circular Saw
The Makita XSH06Z 18V LXT circular saw is known for its light weight and smooth feel. It is comfortable for overhead or extended cutting. It suits people who value handling. It is a bare tool, so you must own Makita batteries, and in tough, thick cuts it may feel less powerful than the biggest saws. For household use, that is rarely a problem.
4. Skil 5280-01 Circular Saw
The Skil 5280-01 circular saw is a straightforward corded saw with a worm-drive-style layout that some users find stable and easy to follow along a line. It is an affordable option for a home shop. The negatives are the cord, a heavier body and basic features. Replace the stock blade with a better one to improve cut quality.
5. Bosch CS10 Corded Circular Saw
The Bosch CS10 corded circular saw offers a clear view of the cutting line, a comfortable grip and a solid base. It has a good reputation for accuracy. It is aimed at users who want a dependable corded tool for frequent use. The downsides are the cord and a more modest feature list, but for the money it is a practical choice.
Blades Make or Break the Saw
A saw is only as good as its blade. Blades come with different tooth counts: fewer teeth, around 24, cut quickly and suit framing, while more teeth, 40 or more, leave a smoother finish for plywood and trim. A thin-kerf blade removes less material and demands less power from a cordless saw. Carbide-tipped blades stay sharp longer. Replace the blade when it burns wood, requires force, or leaves rough edges. Always unplug or remove the battery before changing a blade, and make sure it spins in the right direction. A few good blades for different tasks are more valuable than a single expensive saw.
Safety Basics
Wear eye and hearing protection, and a dust mask when cutting sheet goods. Support the work so the offcut does not pinch the blade, set the blade depth just below the material and keep both hands on the saw. Let the blade reach full speed before cutting, and keep the cord or your body out of the line of the cut. Never remove or tie back the lower guard. Clamp the workpiece securely, and do not cut over your legs. Allow the blade to stop completely before setting the saw down.
Making Straighter, Cleaner Cuts
Most poor cuts come from setup, not the saw. Mark your line clearly, and decide which side of the line the blade should remove. Clamp a straightedge, a speed square or a purpose-made guide to the board, and run the saw’s base plate along it. For breaking down plywood, support the sheet on foam insulation or a pair of sawhorses with scrap boards across them, so the cut piece does not drop and pinch the blade. Set the blade depth so that it protrudes about a quarter inch below the material, which reduces kickback and tear-out. Cut with the good face down for a circular saw, since the blade teeth move upward through the face on the bottom. Take your time at the start of the cut, let the base sit flat, and do not twist the saw in the cut. If the saw begins to bind, release the trigger and hold it still until the blade stops. A sharp blade, steady feed rate and clear sightline do far more for accuracy than the brand name on the housing.
It is also useful to check the saw’s squareness once. Set the base to zero degrees, hold a square against the blade and the base, and adjust the stop if there is a gap. A saw that cuts a few degrees off square will ruin carefully measured cuts.
How to Choose
- Power source: Corded for shop work. Cordless for convenience.
- Blade size: 7-1/4 inch is the standard for general use. Smaller saws are lighter but cut less deep.
- Bevel range: Bevel capacity matters if you cut angles.
- Weight and balance: Try one if you can. Overhead cuts punish heavy saws.
- Dust management: A blower or dust port keeps the line visible.
- Brake: An electric brake stops the blade quickly, which is a nice safety feature.
Common Mistakes
- Using a dull blade. It forces the saw, burns the wood and increases kickback risk.
- Cutting unsupported boards. The kerf can close and pinch the blade.
- Buying a cordless bare tool without batteries. Check what you need to add.
- Ignoring the guide. A straightedge guide improves accuracy a great deal.
FAQ
Is a cordless circular saw powerful enough?
For most DIY and many professional tasks, yes, particularly with brushless motors and large batteries. For heavy continuous cutting, corded saws still have the edge.
What size circular saw should I buy?
A 7-1/4 inch saw suits most work. Smaller 6-1/2 inch cordless saws are lighter but cut shallower.
What is kickback?
It is a sudden backward thrust when the blade binds. Support your work, use a sharp blade, and stand slightly to the side of the cut line.
Should I buy a track saw instead?
Track saws give more precise cuts on sheet goods, but they cost more. A circular saw with a clamped guide gets you most of the way.
Conclusion
A good circular saw makes lumber work quicker and safer. Choose between corded and cordless based on where you work, buy decent blades, and learn the safety habits. Any saw on this list will serve a homeowner well.
As an Amazon Associate we earn from qualifying purchases.
Related guides
Read next
More from Amazon
Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.
A free business account with business pricing and bulk-buying tools for work, shop or home office.
Create a business accountFree shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.
Start a Prime free trialAudiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.
Try Audible freeAd-free music streaming. Eligible new subscribers can start with a free trial.
Try Music Unlimited freeAs an Amazon Associate we earn from qualifying purchases.


Write Your Review
No reviews yet. Be the first to share your experience!