Our Top Picks
What's inside
- Top Picks at a Glance
- Comparison Table
- Before You Touch the Head: Safety First
- How to Install Trimmer Line: The Universal Steps
- 1. Ryobi AC80RL3: Best for Replacing Line on Ryobi ONE+ Cordless Trimmers
- 2. Ryobi AC14RL3A: Best for Light Trimming and Edges
- 3. EGO Power+ AL2420P: Best Pre-Cut Lines for EGO Trimmers
- 4. EGO Power+ AH1520 POWERLOAD Head: Best Head Swap for 15 Inch EGO Trimmers
- 5. Milwaukee 49-16-2712: Best Line for M18 FUEL Trimmers
- 6. Stihl AutoCut C 26-2: Best Head for Stihl FS Trimmers
- 7. Husqvarna XP+ 2-Cycle Oil, 2.6 oz: Best for Mixing Trimmer Fuel Correctly
- Also Consider
- How to Edge with a String Trimmer or Weed Eater
- How to Clean a String Trimmer and Its Attachments
- How We Chose
- Buying Guide
- Common Mistakes
- A Note on Hair Trimmers
- Frequently Asked Questions
- Which One Should You Buy?
- Sources
- Top Picks at a Glance
- Comparison Table
- Before You Touch the Head: Safety First
- How to Install Trimmer Line: The Universal Steps
- 1. Ryobi AC80RL3: Best for Replacing Line on Ryobi ONE+ Cordless Trimmers
- 2. Ryobi AC14RL3A: Best for Light Trimming and Edges
- 3. EGO Power+ AL2420P: Best Pre-Cut Lines for EGO Trimmers
- 4. EGO Power+ AH1520 POWERLOAD Head: Best Head Swap for 15 Inch EGO Trimmers
- 5. Milwaukee 49-16-2712: Best Line for M18 FUEL Trimmers
- 6. Stihl AutoCut C 26-2: Best Head for Stihl FS Trimmers
- 7. Husqvarna XP+ 2-Cycle Oil, 2.6 oz: Best for Mixing Trimmer Fuel Correctly
- Also Consider
- How to Edge with a String Trimmer or Weed Eater
- How to Clean a String Trimmer and Its Attachments
- How We Chose
- Buying Guide
- Common Mistakes
- A Note on Hair Trimmers
- Frequently Asked Questions
- Which One Should You Buy?
- Sources
As an Amazon Associate I earn from qualifying purchases. This post may contain affiliate links at no extra cost to you.
Home › Outdoor Power Equipment › Trimmer Line Reload and Care: Ryobi, EGO, Stihl, Milwaukee
The fastest way to replace string trimmer line is to remove the battery or spark plug cap, open the head, feed the new line through the eyelets, wind it in the direction marked on the head, and snap the cover back on. For Ryobi ONE+ owners the easiest route is a pre-wound spool such as the Ryobi AC80RL3, and for gas owners the biggest day-to-day win is mixing fuel correctly with a measured bottle of oil such as Husqvarna XP+ 2.6 oz. This guide covers how to load, reload, remove and clean heads on Ryobi, EGO, Stihl and Milwaukee trimmers, how to edge with a string trimmer, and how to mix 2-cycle fuel.
Because every brand loads line a little differently, we lean on the manual for your exact model wherever a detail (thread direction, line diameter, spool size) varies. Where a spec is not stated in the product listing, we say “not listed” instead of guessing. This guide is research-based: we did not personally use these products, and we point you to the maker’s instructions for anything safety-related.
As an Amazon Associate we earn from qualifying purchases at no extra cost to you.
Top Picks at a Glance
- Best for Ryobi ONE+ owners (thicker line): Ryobi AC80RL3 pre-wound spool (.080 inch, 3 pack)
- Best for Ryobi light-duty trimming: Ryobi AC14RL3A pre-wound spool (.065 inch, 3 pack)
- Best for EGO owners who cut their own lines: EGO Power+ AL2420P pre-cut twisted lines (.095 inch, 5 pack)
- Best EGO head replacement: EGO Power+ AH1520 POWERLOAD head for 15 inch trimmers
- Best for Milwaukee M18 owners: Milwaukee 49-16-2712 trimmer line (diameter not listed in the title)
- Best head for Stihl straight-shaft trimmers: Stihl AutoCut C 26-2 head
- Best for gas fuel mixing: Husqvarna XP+ 2-cycle oil, 2.6 oz bottles
Comparison Table
| Product | Best for | Key specs | Watch for | Price tier |
|---|---|---|---|---|
| Ryobi AC80RL3 | Ryobi 18V, 24V and 40V cordless trimmers | .080 inch twisted line, pre-wound spool, 3 pack | Only fits Ryobi spool-style heads | Budget |
| Ryobi AC14RL3A | Light trimming along edges and fences | .065 inch line and spool, 3 pack | Thinner line wears faster on thick weeds | Budget |
| EGO Power+ AL2420P | EGO trimmers that take pre-cut lines | .095 inch twisted, pre-cut, 5 pack | Confirm your head accepts pre-cut lengths | Budget |
| EGO Power+ AH1520 | Replacing a worn POWERLOAD head | Listed for ST1520S, ST1521S, ST1510S, ST1511S, ST1524 and ST1520 | Not for other EGO trimmer lengths | Mid-range |
| Milwaukee 49-16-2712 | M18 FUEL trimmers | Genuine trimmer line; diameter not listed | Check manual for line size | Budget |
| Stihl AutoCut C 26-2 | Stihl FS-series straight-shaft trimmers | Bump-feed head, part 4002 710 2169 | Check your model’s compatibility list | Mid-range |
| Husqvarna XP+ 2.6 oz | Gas trimmers at 50:1 | 2.6 oz per US gallon of fuel, 6 pack | Confirm your engine’s ratio first | Budget |
Before You Touch the Head: Safety First
Always remove the power source before opening a trimmer head. On battery trimmers (Ryobi ONE+, EGO, Milwaukee M18) take the battery out of the tool. On gas trimmers stop the engine, let it cool, and pull the spark plug boot off the plug if the manual suggests it for head work. Wear gloves, because worn line ends and head edges are sharp, and eye protection, because old line can snap and spring when you pull it out. Never work on a head with the trimmer resting on its power switch or trigger.
Keep the shield in place after you finish. The cutting-line limiter blade on the shield trims the line to the right length, and a missing shield makes the line longer than the motor is designed to spin. If a head has been struck against concrete, check for cracks in the housing before you re-assemble it.
How to Install Trimmer Line: The Universal Steps
To install trimmer line on any bump-feed or manual-feed head, you cut a length of line, find the center, thread it through the eyelets or the anchor slot, wind each half onto the spool in the arrow direction, and clip the ends into the notches before refitting the cover. The exact line length depends on the head, so check the manual or the head label for the maximum capacity.
- Disconnect power. Remove the battery or disable the engine as above.
- Open the head. Squeeze the side tabs or press the cover latch and pull the cover off. Lift out the spool and note which way it sits.
- Clear old line. Pull out remaining line and clean grass and dust from the spool and housing.
- Cut new line. Cut the length the manual specifies. If it is not stated in your manual, follow the head’s capacity marking on the spool rather than guessing.
- Anchor and wind. Fold the line in half, hook the fold into the center notch or feed both ends through the anchor holes, and wind neatly in the direction of the arrows. Tidy winding prevents tangles later.
- Park the ends. Leave a few inches free and clip each end into a notch.
- Refit and feed. Thread the ends out of the eyelets, replace the spool and cover, and tug line free of the notches.
This is also the answer to “how to load a line trimmer”, “how to spool a weed trimmer”, “how to restring a grass trimmer” and “how to rethread a weed trimmer”: they are all this same job on slightly different heads.
1. Ryobi AC80RL3: Best for Replacing Line on Ryobi ONE+ Cordless Trimmers
- .080 inch twisted line, pre-wound on a spool
- Listed as a replacement for Ryobi 18V, 24V and 40V cordless trimmers
- Sold as a 3 pack
- Drop-in spool style: no line cutting or winding
- Listed as the genuine Ryobi OEM part
Best for: anyone who dreads winding line. Skip if: your Ryobi model uses the thinner .065 inch spool or a different head style.
Ryobi’s ONE+ trimmers are designed around spools that drop into the head. That changes how you replace line: you are swapping a cassette, not threading line. For how to replace a Ryobi trimmer line, the steps are short. Remove the battery, press the tabs on the cap and take it off, lift out the empty spool, drop the new spool in so the line end passes through the eyelet, and press the cap back on. Check the manual for the orientation of the spool and for any tab alignment, since Ryobi has used more than one head design across its 18V, 24V and 40V trimmers.
If you are asking how to remove a Ryobi trimmer head or how to remove a Ryobi 18V trimmer head, the usual pattern across brands is to lock the shaft, either with a pin or a hex key through a hole in the gearbox flange, and then turn the head by hand. Thread direction differs by tool, and we could not confirm a single rule for every Ryobi head, so check your manual before forcing anything. Turning the wrong way can strip the plastic threads.
Pros: fastest reload of any approach in this guide; matches the OEM spool; three spools per pack; no tangles. Cons: costs more per foot of line than bulk line; only for compatible Ryobi heads.
2. Ryobi AC14RL3A: Best for Light Trimming and Edges
- .065 inch line on a pre-wound spool
- Listed for Ryobi 18V, 24V and 40V cordless trimmers
- Sold as a 3 pack
- Thinner line is gentler on delicate edges but wears faster on thick weeds
Best for: small lawns with mostly grass edges. Skip if: you cut woody weeds or tall brush.
Line diameter is a trade-off between cut quality and durability. Thin line cuts grass cleanly, runs slightly lighter on the motor and feeds out a long way per spool. Thicker line survives fences, brick and brush better. Because both Ryobi spools in this guide are listed for the same trimmer families, the right answer depends on what you cut, but verify in your manual which diameter your specific model recommends. Using a thicker line than the manual allows can overload the motor and shorten battery runtime.
Pros: light duty and tidy; same simple spool swap; good for edges. Cons: wears fast on tough growth; not compatible with every Ryobi head.
3. EGO Power+ AL2420P: Best Pre-Cut Lines for EGO Trimmers
- .095 inch twisted line, pre-cut
- 5 pack
- Made for EGO Power+ trimmer heads that accept loose lines
- Twisted profile, which is generally quieter than round line (check the maker’s page)
Best for: EGO owners who want the maker’s own line cut to length. Skip if: your head is a continuous-spool head only.
EGO trimmers use heads such as POWERLOAD and Rapid Reload, which are designed to take line without removing the head. That matters for how to load an EGO string trimmer and how to reload an EGO string trimmer: on a POWERLOAD head, you typically feed the line into the head’s opening and the head winds it for you when you press the load button or power the trimmer, according to the maker’s documentation. We did not verify the exact button sequence on every EGO model, so read the guide for your trimmer. The most common mistake is feeding the line in the wrong way or leaving it too short to catch.
Pre-cut lines remove the guesswork about length. If you prefer bulk line, check the head’s capacity first and confirm .095 inch is allowed for your model.
Pros: exact length every time; maker-matched; easy to stash in a pouch. Cons: costs more than bulk line; you run out of pieces if you trim a lot.
4. EGO Power+ AH1520 POWERLOAD Head: Best Head Swap for 15 Inch EGO Trimmers
- Replacement POWERLOAD head
- Listed for ST1521S, ST1520S, ST1511S, ST1510S, ST1524 and ST1520
- Used when a head cracks, loses its bump button or will not feed
Best for: an EGO trimmer whose head is damaged. Skip if: your model is not in the listed range.
If cleaning and re-winding do not fix a head, replacing it is cheaper than replacing the trimmer. Always match the head number to the model list, as the EGO catalog includes different heads for 15 inch, 16 inch telescopic and attachment-capable models, and they do not interchange. Fitting instructions are in your manual: you lock the shaft, unscrew the old head, and thread the new one on. Many modern heads have a reverse thread, so confirm the direction from the manual or a label.
Pros: restores a trimmer for a fraction of replacement cost; maker part. Cons: exact model fit is essential; not the cheapest part.
5. Milwaukee 49-16-2712: Best Line for M18 FUEL Trimmers
- Genuine Milwaukee trimmer line
- Line diameter and length: not listed in the product title
- Used with Milwaukee M18 string trimmers and QUIK-LOK attachments
Best for: Milwaukee owners who want the maker’s line. Skip if: you already run a bulk line that your manual approves.
For how to load a Milwaukee string trimmer, the M18 FUEL trimmers and the QUIK-LOK attachment use a head that accepts line through the cap or from the head, depending on the model. We could not verify a single procedure across all M18 models, so use the manual’s loading section. What we can say is that M18 trimmers are available as tool-only, kit and attachment versions; the head and line are the same family across them, but the diameter is not stated in the listing title, so we do not quote one.
Pros: maker-matched; fits QUIK-LOK trimmers. Cons: spec details missing in the listing; price per foot is higher than bulk line.
6. Stihl AutoCut C 26-2: Best Head for Stihl FS Trimmers
- Bump-feed head, Stihl part 4002 710 2169
- Used on many FS-series trimmers; the listing names compatible models in its description
- Two-line head; line diameter per the head label
Best for: Stihl owners who want an easy-reload head. Skip if: you have a trimmer with a different shaft thread.
For how to restring a Stihl trimmer, an AutoCut-style head lets you feed line without disassembly on many models: you cut line to the length in the manual, push it into the opening on the head, and wind it by turning the head in the direction shown. When the line runs out, you open the head, remove the spool and thread fresh line. As always, check the AutoCut instructions printed on the head; the winding direction is marked.
Third-party replacement heads for Stihl are common in listings. They may fit, but check that the part number matches your trimmer; do not assume.
Pros: quick reload; maker part; wide model fit. Cons: mid-range price; confirm the fit list.
7. Husqvarna XP+ 2-Cycle Oil, 2.6 oz: Best for Mixing Trimmer Fuel Correctly
- 2.6 oz bottles in a 6 pack
- Designed for 50:1 mixing in 1 US gallon of fuel
- Pre-measured to avoid math at the pump
Best for: anyone mixing gas for a 2-cycle trimmer. Skip if: your trimmer is battery powered, because you do not need fuel at all.
How to mix 2-cycle fuel for string trimmers comes down to arithmetic: a 50:1 ratio means 50 parts gasoline to 1 part oil, which works out to 2.6 fluid ounces of oil for each US gallon of gasoline. Ryobi’s own manuals describe a 50:1 mix for their 2-cycle trimmers, and a 2.6 oz bottle is designed to treat exactly one gallon. Some older or other-brand trimmers call for different ratios such as 40:1 or 32:1, so read your engine’s manual first.
- Pour about half of the gasoline into an approved fuel can.
- Add the measured oil (one 2.6 oz bottle per gallon at 50:1).
- Close and gently swirl the can, then add the rest of the fuel.
- Label the can with the date and ratio.
- Fill the trimmer tank outdoors, away from sparks, with the engine off and cool.
Use fresh unleaded gasoline as your manual specifies; some manuals limit ethanol to 10 percent. Mixed fuel can go stale, so mix only what you will use in a reasonable period and follow the manual’s guidance on storage.
Pros: eliminates measuring errors; six bottles; matches the common 50:1 spec. Cons: useless for battery trimmers; confirm your ratio.
Also Consider
- Oregon Magnum Gatorline .095 inch (282 ft): a bulk twisted line for gas trimmers whose heads accept .095 inch. Check the manual for the largest allowed diameter.
- Echo Power Blend Gold 50:1 oil mix: another measured 2-cycle oil option for gas trimmers.
- Arnold 2-cycle engine oil mix with Tip N Measure bottle: a budget option if you want a pour-and-measure bottle for chainsaws, trimmers and blowers.
- Husqvarna Titanium Force .095 line: a 140 foot spool of maker line, useful if you want to wind your own.
How to Edge with a String Trimmer or Weed Eater
To edge with a string trimmer, you tilt the trimmer so the line spins on a vertical plane (or flip the head into edging mode if it has one), run the line along the concrete or paver edge, and slice the grass roots back a half inch or so. How to edge with a weed eater and how to edge with a weed trimmer are the same steps; the names are interchangeable.
- Mow first. Edging after mowing lets you see the edge clearly.
- Wear eye protection and long pants. Edging throws rocks and grit sideways.
- Tilt the head. Many trimmers allow rotating the head 90 degrees; some use an edging guide wheel. If yours does not, hold the shaft at a steep angle and keep the line in the vertical position.
- Walk slowly. Let the line cut at its own pace; keep the guard between you and the debris.
- Make the first pass shallow. You can always deepen it.
- Sweep or blow debris. Use a broom or blower, then re-check the line length.
Edging wears line fast, particularly against concrete. If you edge weekly, a thicker line (for example .080 or .095 inch if the head allows it) will last longer than .065 inch, and a pre-cut line pack lets you replace line without opening the head every time.
How to Clean a String Trimmer and Its Attachments
To clean a string trimmer, remove the battery or let the engine cool, wipe grass off the shaft and guard, open the head and clear packed grass from the spool and housing, and check air vents on gas models. How to clean trimmer attachments follows the same logic: remove the attachment from the powerhead if it is a split-shaft or QUIK-LOK type, wipe it, and check the coupler for debris before re-attaching.
- Head: use a stiff brush and a dry cloth. Avoid soaking the head. Check the eyelets for sharp edges that cut the line.
- Guard: grass packs behind it and lets sap harden; scrape it clear.
- Vents (battery models): blow out dust with low-pressure air or a soft brush. Never spray water into the motor housing.
- Air filter (gas models): check and clean per the manual.
- Shaft and coupler: wipe and check that locking buttons move freely. For attachment-capable trimmers (such as M18 QUIK-LOK or EGO multi-head), keep the connector clean and dry.
Cleaning after every few uses prevents most feed problems. A head that jams is more often full of packed grass or has line wound crossed over itself than it is broken.
How We Chose
This guide is research-based. We reviewed manufacturer product pages and listing details for each part, compared them with maker manuals and independent how-to references (for example Ryobi owner manuals for fuel mixing guidance, and publications such as Powered Outdoors for fuel ratios), and cross-checked part names and fit lists in the store. We did not personally use these products. Where a listing did not state a spec, such as the diameter of the Milwaukee line, we say “not listed” and point you to the manual. We did not quote prices; tiers are relative.
Buying Guide
Match the part to the model, not the brand
The most common reason a trimmer line or head does not work is fit. A Ryobi spool for a 40V trimmer may not fit an older Ryobi gas trimmer head. EGO heads vary by shaft length. Stihl heads vary by shaft thread. Before buying, read the model number on your trimmer (often on the motor housing or the shaft label) and match it to the fit list in the listing. If the listing does not name your model, treat it as unconfirmed.
Line diameter: stay within the manual’s range
Typical hand-held trimmer lines range from about .065 inch for light electric trimmers to .095 inch and thicker for brush-oriented gas trimmers. Your manual states the allowed range. Do not go thicker than allowed. A thicker line can overload a motor and drain a battery faster. If your manual does not state a range, use the line size printed on the head or the maker’s replacement spool.
Pre-wound spools vs bulk line
Pre-wound spools are fastest and avoid tangles. Bulk line costs less per foot but needs winding. If you trim for twenty minutes every week, spools are convenient. If you run a half-acre of edging, bulk saves money, as long as the head can take it.
Twisted, round and square shape
Round line is the cheapest and tends to be the loudest. Twisted line runs quieter and cuts slightly more cleanly. Square and multi-sided lines cut tough weeds better but may pull more power. The listings in this guide include twisted line for Ryobi and EGO; shape is a secondary choice to diameter and fit.
Fuel and oil for gas trimmers
Use the ratio in your manual. Many modern trimmers call for 50:1, which is 2.6 oz of oil per gallon; some older units differ. Use fresh gasoline, a clean approved can, and oil rated for air-cooled 2-cycle engines. If you only trim lightly, consider a battery trimmer so you can skip fuel handling entirely.
Common Mistakes
- Overfilling the head with line, so it cannot feed.
- Winding in the wrong direction. The arrows on the spool show the right way.
- Forcing a head off the shaft without locking it, which can strip threads.
- Using thicker line than the manual allows.
- Mixing fuel at a guessed ratio.
- Edging without eye protection.
A Note on Hair Trimmers
Some people searching “how to trim hair with a trimmer” land on garden pages by mistake. This is a lawn tool guide. A personal grooming trimmer is a different product with its own manual, and you should not use a string trimmer on hair or skin. Check the grooming trimmer’s manufacturer instructions instead.
Frequently Asked Questions
How do you replace string trimmer line?
You disconnect power, open the head, remove the spool, clear old line and debris, wind new line in the arrow direction, clip the ends in the notches, and close the head. On pre-wound spool trimmers such as many Ryobi ONE+ models, you simply swap the spool.
How do I replace Ryobi trimmer line?
Take out the battery, remove the cap, swap in a new pre-wound spool such as the AC80RL3 (.080 inch) or AC14RL3A (.065 inch) if your model uses them, and refit the cap. Check your manual to confirm which spool your trimmer takes.
How do I remove a Ryobi 18V trimmer head?
Take out the battery, lock the shaft using the lock hole or a hex key if the manual shows one, and turn the head in the direction the manual specifies. Thread direction is not the same on every tool, so check your manual before forcing it.
How do I reload an EGO string trimmer?
Remove the battery and follow the loading steps for your head type. Heads such as POWERLOAD are designed to accept line without being taken apart, but the exact button or power sequence varies by model, so use the EGO manual for yours. Pre-cut lines like the AL2420P make this simpler.
How do I load a Milwaukee string trimmer?
Disconnect the battery, open the head or feed point as shown in the M18 manual, and load the line of the size your manual specifies. We could not verify one method for every M18 and QUIK-LOK model, so the manual is the guide.
How do I restring a Stihl trimmer?
Cut the line to the length the head label shows, then either push it into the head’s feed opening or open the head, thread the line and wind it in the arrow direction. An AutoCut-style head such as the C 26-2 is designed for quick reload.
How much 2-cycle oil do I add to a gallon of gas?
At 50:1, add 2.6 fluid ounces of oil to one US gallon of gasoline. Always check the ratio in your engine’s manual first, since some older trimmers specify a different mix.
How do I edge with a string trimmer?
Rotate the head or tilt the trimmer so the line spins vertically, wear eye protection, and walk slowly along the edge with the guard toward you. Make a shallow first pass and clear debris afterwards.
Which One Should You Buy?
If you own a Ryobi ONE+ trimmer, a pre-wound spool pack such as the AC80RL3 is the least stressful way to keep line fresh. EGO owners should look at the AL2420P pre-cut lines and keep the AH1520 head in mind for a cracked head. Milwaukee owners should buy the maker’s line and follow the manual for the size. Stihl owners get a lot from the AutoCut C 26-2 head. Gas trimmer owners should buy measured oil bottles so the 50:1 mix is right every time. In every case, confirm the model fit before buying, because fit is the thing that most often goes wrong.
Sources
- Ryobi owner’s manuals for gas string trimmers (fuel mixture sections)
- Powered Outdoors, fuel and oil guide for string trimmers
- EGO Power+ product and parts pages
- Milwaukee Tool M18 FUEL string trimmer product pages
- Stihl AutoCut head product and instruction pages
- Husqvarna 2-cycle oil product pages
Last updated: October 2026
Related guides
Read next
- Quality Cordless Hedge and Grass Trimmers: Ryobi Picks and Loppers
- How to String a Weed Trimmer: Line Size, Heads and Step-by-Step
- Ryobi Hedge Trimmer 18V Review: Price, Specifications, and Is It Worth Buying?
- Best Cordless Hedge Trimmers and Garden Power Tools for One Yard
- Milwaukee Top Handle Chainsaw: 12-Inch vs. 14-Inch Models and Buying Guide
- Best Shallow Well Pumps for Home Water, Irrigation and Tanks
More from Amazon
Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.
A free business account with business pricing and bulk-buying tools for work, shop or home office.
Create a business accountFree shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.
Start a Prime free trialAudiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.
Try Audible freeAd-free music streaming. Eligible new subscribers can start with a free trial.
Try Music Unlimited freeAs an Amazon Associate we earn from qualifying purchases.




Write Your Review
No reviews yet. Be the first to share your experience!