Our Top Picks
What's inside
- Top Picks at a Glance
- Comparison Table
- Before You Start: Safety and Setup
- Step by Step: How to String a Bump Feed Head
- How to Thread a Head That Needs Disassembly
- How to Restring Cordless Trimmers with Fixed or Pre-Wound Spools
- 1. Oregon Magnum Gatorline .095 inch (282 ft): Best Overall Line for Gas Trimmers
- 2. Husqvarna Titanium Force .095 inch (140 ft): Best Genuine Maker Line
- 3. Viabrico .080 inch Square Line (425 ft): Best Value Bulk Line
- 4. Ryobi AC80RL3 Spool Refill (3 pack): Best for Ryobi Cordless Trimmers
- 5. EGO Power+ Pre-Cut .095 inch Twisted Lines (5 pack): Best for EGO Owners
- 6. Echo Speed-Feed 400 Head: Best Easy-Reload Head for Echo
- 7. Stihl AutoCut C 26-2 Head: Best Head for Stihl Trimmers
- Also Consider
- How We Chose
- Buying Guide: Line Size, Shape and Head Type
- Common Mistakes to Avoid
- Troubleshooting a Head That Will Not Feed
- Frequently Asked Questions
- Which One Should You Buy?
- Sources
- Top Picks at a Glance
- Comparison Table
- Before You Start: Safety and Setup
- Step by Step: How to String a Bump Feed Head
- How to Thread a Head That Needs Disassembly
- How to Restring Cordless Trimmers with Fixed or Pre-Wound Spools
- 1. Oregon Magnum Gatorline .095 inch (282 ft): Best Overall Line for Gas Trimmers
- 2. Husqvarna Titanium Force .095 inch (140 ft): Best Genuine Maker Line
- 3. Viabrico .080 inch Square Line (425 ft): Best Value Bulk Line
- 4. Ryobi AC80RL3 Spool Refill (3 pack): Best for Ryobi Cordless Trimmers
- 5. EGO Power+ Pre-Cut .095 inch Twisted Lines (5 pack): Best for EGO Owners
- 6. Echo Speed-Feed 400 Head: Best Easy-Reload Head for Echo
- 7. Stihl AutoCut C 26-2 Head: Best Head for Stihl Trimmers
- Also Consider
- How We Chose
- Buying Guide: Line Size, Shape and Head Type
- Common Mistakes to Avoid
- Troubleshooting a Head That Will Not Feed
- Frequently Asked Questions
- Which One Should You Buy?
- Sources
As an Amazon Associate I earn from qualifying purchases. This post may contain affiliate links at no extra cost to you.
Home › Outdoor Power Equipment › How to String a Weed Trimmer: Line Size, Heads and Step-by-Step
To string a weed trimmer, switch the tool off and remove the battery or spark plug cap, match the new line to the diameter printed in your manual (most homeowner trimmers use .080 or .095 inch), feed it through the eyelets of the head or wind it onto the spool, and bump or pull to advance it. For gas trimmers with a bump feed head such as the Echo Speed-Feed 400, the whole job takes a couple of minutes without taking the head apart. The best all-round line for most gas trimmers is a .095 inch twisted or square line from a known maker such as Oregon, while cordless Ryobi, Greenworks and similar owners are usually best served by the matching pre-wound spool or the .080 inch line their manual specifies.
This guide explains how to string a trimmer, how to thread a weed trimmer head by type, how to choose line size and shape, and which replacement heads and lines are worth considering. It covers the common questions behind searches such as how to string an Echo trimmer, how to string a Stihl trimmer, how to replace trimmer line on a bump feed head and how to string a grass trimmer. This is a research-based guide: we did not personally use these products, and specs come from listing titles and maker instruction pages. Where a detail is not stated, we say “not listed”.
As an Amazon Associate we earn from qualifying purchases at no extra cost to you.
Top Picks at a Glance
- Best Overall Line for Gas Trimmers: Oregon Magnum Gatorline .095 inch, 282 ft twisted
- Best Genuine Maker Line: Husqvarna Titanium Force .095 inch, 140 ft
- Best Value Bulk Line: Viabrico .080 inch square line, 425 ft
- Best for Ryobi Cordless Trimmers: Ryobi One+ AC80RL3 .080 inch twisted line and spool (3 pack)
- Best for EGO Owners: EGO Power+ pre-cut .095 inch twisted lines (5 pack)
- Best Easy-Reload Head for Echo: Echo Speed-Feed 400 Head
- Best Head for Stihl Trimmers: Stihl AutoCut C 26-2 Trimmer Head
Comparison Table
| Product | Best for | Key specs (as listed) | Watch for | Price tier |
|---|---|---|---|---|
| Oregon Magnum Gatorline .095 (282 ft) | Gas trimmers and brushcutters, thick weeds | .095 inch; 282 ft; twisted; fits most standard models | Too thick for some light cordless heads | Mid-range |
| Husqvarna Titanium Force .095 (140 ft) | Husqvarna owners and mixed yard work | .095 inch; 140 ft spool; copolymer | Short length for large properties | Budget |
| Viabrico .080 Square (425 ft) | Light to medium trimming, frequent refills | .080 inch; 425 ft; 1.35 lb; square profile | Confirm head accepts .080 | Budget |
| Ryobi AC80RL3 Spool (3 pack) | Ryobi 18V, 24V and 40V cordless trimmers | .080 inch twisted; pre-wound spools; 3 pack | Only for Ryobi heads that take this spool | Budget |
| EGO Power+ Pre-Cut .095 (5 pack) | EGO trimmers with a compatible head | .095 inch twisted; 5 pre-cut lengths | Pre-cut, so no bulk savings | Budget |
| Echo Speed-Feed 400 Head | Echo SRM trimmers, quick reloads | Genuine head; fits all SRM trimmers per listing | Curved shaft models need a different version | Mid-range |
| Stihl AutoCut C 26-2 Head | Stihl FS series trimmers | Part number 4002 710 2169; two-line bump head | Check model fit before ordering | Mid-range |
Before You Start: Safety and Setup
Turn the trimmer off. For a battery trimmer, remove the battery. For a gas trimmer, let the engine cool and pull the spark plug cap, since a pull of the starter cord is all it takes to spin the head. Wear eye protection and gloves, because old line can be brittle and snap back when cut. Work on a flat surface and set the trimmer on its side with the head accessible. Read the manual for your model, because line diameter, maximum line length and loading arrows are all printed there, and getting them wrong is the most common cause of jams.
Step by Step: How to String a Bump Feed Head
- Find the line size. Check the manual or the label on the trimmer shaft or head. Most homeowner models use .080 or .095 inch, while some light cordless tools use .065 inch.
- Cut the right length. Cut one piece, typically 10 to 20 feet for a two-line head, unless the manual says otherwise. Do not overfill the head.
- Align the arrows or eyelets. Many heads, including the Echo Speed-Feed 400, have arrows on the knob that must line up with the eyelet openings before you feed line through.
- Feed the line. Insert one end through one eyelet and push it through until an equal length protrudes on both sides.
- Wind the spool. For the Speed-Feed 400, hold the head and turn the knob clockwise until about 5 inches (130 mm) of line remains on each side, as the maker’s instruction sheet describes.
- Check the tension. Tug gently on both ends to confirm the line is secure.
- Advance the line. Run the trimmer at normal operating speed and tap the head on the ground to release more line. The trimmer’s line cutter blade on the guard trims it to length.
How to Thread a Head That Needs Disassembly
Some heads, including many Stihl AutoCut and universal bump heads, require opening the housing to reload. Press the tabs or unscrew the cap, take out the spool, and note which way it sits. Fold the new line in half, hook the middle into the notch on the spool, and wind both halves in the direction of the arrow on the spool, keeping the wraps neat and level. Leave about 6 inches of each tail, push the tails through the eyelets, and snap the cap back on. A common mistake is to reinstall the spool backward, which stops the line from feeding properly. If in doubt, take a photo before you open the housing.
How to Restring Cordless Trimmers with Fixed or Pre-Wound Spools
Some cordless trimmers, such as many Ryobi models, use a replacement spool that is already wound with line. In that case the job is simply to open the head, drop in the new spool, thread the line ends through the eyelets and close the cover. The Ryobi AC80RL3 is sold as a three-pack of .080 inch twisted spools for Ryobi 18V, 24V and 40V trimmers. Pre-wound spools cost more per foot than bulk line but save time, and they remove the risk of winding errors. Other brands use similar systems, so follow your tool’s manual.
1. Oregon Magnum Gatorline .095 inch (282 ft): Best Overall Line for Gas Trimmers
- Diameter: .095 inch
- Length: 282 ft
- Profile: twisted
- Intended for: gas and electric grass trimmers and brushcutters, fits most standard models
Best for: thick grass and weeds on gas trimmers with heads that accept .095 line. Skip if: your trimmer’s manual calls for .080 or thinner line.
A twisted profile quiets the cutting noise compared with plain round line and cuts more cleanly than a basic round line of the same diameter. Oregon sells the same Magnum Gatorline in other shapes and lengths, including square and round, so if you prefer a different cut you can stay in the same line family. A longer spool, such as the 685 ft square, makes sense for a larger property because you will reload more often than you think.
Pros: heavy-duty; well known; multiple lengths; quiet twisted profile. Cons: too thick for some cordless heads; costs more than generic bulk line.
2. Husqvarna Titanium Force .095 inch (140 ft): Best Genuine Maker Line
- Diameter: .095 inch
- Length: 140 ft spool
- Material: professional-grade copolymer
- Intended for: standard heads
Best for: Husqvarna owners who want the maker’s own line and do not need a big spool. Skip if: you trim a large property; 140 feet runs out quickly.
Genuine maker line removes one variable when you are troubleshooting. If the head is fed, the length is right and the line is the correct diameter, then problems usually come from winding or from worn line, not from compatibility. The cost per foot is higher than bulk, so for a small yard where you refill a few times a season, it is a practical choice.
Pros: maker-made; right diameter; easy to buy. Cons: short length; higher cost per foot than bulk.
3. Viabrico .080 inch Square Line (425 ft): Best Value Bulk Line
- Diameter: .080 inch
- Length: 425 ft (1.35 lb)
- Profile: square
- Intended for: cordless and gas string trimmers
Best for: homeowners who refill often and want a cheap bulk spool for light to medium trimming. Skip if: your head only accepts .095 or a pre-wound spool.
Square line has sharp corners, which helps with cutting taller grass, but it can wear faster against hard edges like pavers and fences. A bulk spool needs a way to store it out of sunlight, and loose line is easier to cut in lengths for two-line heads. The main danger of cheap bulk line is buying the wrong diameter, so check the number before adding to the cart.
Pros: large quantity; low cost per foot; square profile for cutting. Cons: brand support is limited; wrong diameter is easy to buy.
4. Ryobi AC80RL3 Spool Refill (3 pack): Best for Ryobi Cordless Trimmers
- Diameter: .080 inch twisted
- Pack: 3 pre-wound spools
- Intended for: Ryobi 18V, 24V and 40V cordless trimmers
Best for: Ryobi owners who do not want to wind line by hand. Skip if: your Ryobi model uses a different head type; match the part number to your manual.
Pre-wound spools are the fastest way to reload: pop the old one out, drop in the new one and thread the ends. They remove the need to cut and wind. If you do a lot of edging along hard surfaces, keep two spares in the shed.
Pros: fast reload; correct line size; three spools in a pack. Cons: only for compatible Ryobi heads; costs more per foot than bulk.
5. EGO Power+ Pre-Cut .095 inch Twisted Lines (5 pack): Best for EGO Owners
- Diameter: .095 inch
- Pack: 5 pre-cut lengths, twisted
- Part number: AL2420P
Best for: EGO trimmers that use pre-cut lines in their heads. Skip if: your EGO model uses a different head; confirm with the manual.
Pre-cut lengths take out the guesswork about how much to cut and make a mid-job reload quick. Because each piece is a fixed length, you cannot stretch a pack by trimming it short, so keep a bulk spool of the same diameter for field repairs.
Pros: no measuring; right size for EGO heads; twisted profile. Cons: costs more per foot; limited to compatible heads.
6. Echo Speed-Feed 400 Head: Best Easy-Reload Head for Echo
- Type: bump feed head, genuine Echo
- Fit: listed as fitting all SRM trimmers
- Line size: 2.0 to 2.4 mm (.080 to .095 inch) per Echo’s instruction sheet
- Capacity: about 6 m (20 ft) of line per Echo’s guidance
Best for: Echo owners who want to reload without taking the head apart. Skip if: you have a curved shaft GT trimmer; a separate curved shaft Speed-Feed 400 exists for those.
The reason this head is popular is the reload method: you align the arrows, push one length of line through, and turn the knob to wind both halves on. Echo’s own instructions describe the whole process in five short steps. Third-party Speed-Feed style heads are widely sold at lower cost, but fit and build quality vary, so a genuine head is a sensible first purchase.
Pros: reloads without disassembly; wide line range; genuine fit. Cons: costs more than generic heads; not for every Echo model.
7. Stihl AutoCut C 26-2 Head: Best Head for Stihl Trimmers
- Type: AutoCut two-line bump head
- Part number: 4002 710 2169
- Fit: listed for several Stihl FS models (see listing)
Best for: Stihl FS owners replacing a worn or damaged head. Skip if: your model needs a different AutoCut head; the C 26-2, 25-2 and 27-2 are not interchangeable on every model.
This question comes up in the searches around how to string a Stihl trimmer: the answer is that the AutoCut family is designed for quick line changes, but different FS models take different heads. Check the head number on your old head or the model tag on the shaft, and compare it to the listing.
Pros: genuine Stihl head; designed for easy line changes; established part number. Cons: fit varies by model; higher cost than generic heads.
Also Consider
- Weed Warrior Autowinder II Universal Head: a universal bump feed head with easy reload, listed as fitting most gas and cordless trimmers.
- Quintillus H02 Universal Head: a universal bump head listed with .095 line included and aimed at Weed Warrior, Echo and Husqvarna trimmers.
- Echo 330095071 String Trimmer Line: a genuine Echo line for owners who prefer to stay with the maker.
- Arnold Maxi-Edge .095 inch (200 ft): a commercial-grade line for heavy trimming.
How We Chose
We searched the site’s store for real trimmer lines and heads, then compared listing titles with the manufacturers’ instruction pages, including Echo’s published Speed-Feed 400 instructions. We did not personally use these products, so there is no claim about wear life or cutting performance. We limited the picks to two per brand, favoured listings that name diameter, length and fit, and avoided any with unclear specs. Prices appear as tiers because they change.
Buying Guide: Line Size, Shape and Head Type
1. Line diameter
Use the diameter in your manual. As a rough guide, .065 inch suits light electric tools, .080 inch suits many cordless trimmers, and .095 inch suits many gas trimmers and heavier cordless tools. Going thicker than the manual allows can overload the motor, and going thinner wastes time and breaks quickly. Some heads, such as the Echo Speed-Feed 400, accept a range (.080 to .095 inch), but the DSRM-300 is an exception limited to 2.0 mm, which is why checking the manual is not optional.
2. Line shape
Round line is the cheapest and quiet but dull. Twisted line cuts more quietly and with less drag. Square or multi-sided line has sharp corners that bite into thicker growth but may wear faster on hard edges. For a typical lawn edge, a twisted .080 or .095 inch is a safe pick. For thick weeds, square or serrated is often preferred.
3. Head type
Bump feed heads release line when you tap them on the ground. Automatic heads feed line as you work. Fixed-line heads need manual loading of pre-cut pieces. Pre-wound spool systems trade a higher cost per foot for faster reloads. Choose the type your tool is built for, because swapping to a different type needs the correct arbor adapter and guard.
4. How much line to buy
For a small yard that you trim 20 times a season, one 140 to 280 ft spool lasts a year or two. For a larger property, a bulk spool of 400 ft or more saves money. A useful rule is to buy line by the number of refills, not by the number of feet, and to keep one spare reload on the shelf.
5. Storage and age
Nylon line dries out with age and heat, becoming brittle. Keep spools in a cool, dark place and consider soaking old line in water for a day before loading if it feels stiff. Many users say this can help with older line, but the manual and maker remain your best guide.
Common Mistakes to Avoid
- Using the wrong diameter for the head.
- Overfilling the head, which can jam the bump feed.
- Forgetting to align the loading arrows and eyelets.
- Reinstalling the spool backward after disassembly.
- Winding line loosely or crossing the wraps, which can cause tangling.
- Skipping safety steps such as removing the battery or the spark plug cap.
Troubleshooting a Head That Will Not Feed
If the head will not release line after restringing, check the simplest causes first. Make sure the line is not welded together from heat on the spool, which can happen with old line after hard use, and that the wraps are not crossed. Check that the line is not too thick and that the eyelets are not worn to a sharp edge. Clean grass and dirt out of the head, since packed debris can stop the spool from moving. Finally, confirm that the spool is installed the right way round and that the line exits the correct eyelets. If a head is cracked or the spring is weak, replacement is usually the quickest fix, which is why heads such as the Echo Speed-Feed 400 and Stihl AutoCut appear in this guide.
Frequently Asked Questions
How do you string a weed trimmer?
Turn it off and remove the battery or spark plug cap, match the line to the diameter in your manual, feed or wind it into the head, and bump the head on the ground to advance it. The exact steps depend on your head type.
How do I string an Echo trimmer?
On a Speed-Feed 400, align the arrows with the eyelet openings, push one piece of line through, and turn the knob clockwise until about 5 inches remains on each side. Echo’s instruction sheet covers these steps.
How do I string a Stihl trimmer?
Stihl AutoCut heads load by opening the housing or feeding line through the head, depending on the model. Check your model’s AutoCut number and follow the manual, because the C 26-2, 25-2 and 27-2 work differently.
What size line does my trimmer use?
The manual and the label on the shaft or head state the right size. Common sizes are .065, .080 and .095 inch, and using the wrong one can strain the motor or jam the head.
How much line should I put in a trimmer head?
Follow the manual. For Echo’s Speed-Feed 400, the head holds about 20 feet of line. Overfilling can stop the head from feeding.
How do you replace trimmer line on a bump feed head?
Remove the old line, cut a new length, feed it through the eyelets or wind it onto the spool, then close the head. Advance the line by tapping the head on the ground while the trimmer is running.
Can I use a thicker line than the manual recommends?
Not safely. Thicker line puts more load on the motor and may not fit the eyelets. Stay within the range the manufacturer states.
Which One Should You Buy?
If you own a gas trimmer and want one reliable line, buy the Oregon Magnum Gatorline .095 inch in the length that suits your yard. For a Ryobi or EGO cordless trimmer, buy the matching spool or pre-cut line. If you are replacing a head rather than line, the Echo Speed-Feed 400 and Stihl AutoCut C 26-2 are the maker-matched picks for their brands, and universal heads such as the Weed Warrior Autowinder II are a lower-cost alternative if you confirm fit. Whichever you choose, check the diameter against the manual first.
Sources
- Echo USA: Speed-Feed 400 trimmer head instruction sheet
- Echo USA: how to reload an Echo Speed-Feed trimmer head
- Stihl AutoCut trimmer head information and parts pages
- Ryobi and EGO replacement spool and line product pages
- Product listings for each named line and head
Last updated: October 2026
Related guides
Read next
- How to Restring a String Trimmer: Identify Your Head First
- Best Battery Powered Weed Eater: 6 Cordless String Trimmers Worth Considering
- Trimmer Line Reload and Care: Ryobi, EGO, Stihl, Milwaukee
- Battery Lawn Mowers by Yard Size: 20V, 40V, 60V and Robot Picks
- Electric Dethatcher Scarifier Showdown: Depth Settings and Bags
- Best Small Electric Hedge Trimmers for Tidy Compact Hedges
More from Amazon
Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.
A free business account with business pricing and bulk-buying tools for work, shop or home office.
Create a business accountFree shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.
Start a Prime free trialAudiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.
Try Audible freeAd-free music streaming. Eligible new subscribers can start with a free trial.
Try Music Unlimited freeAs an Amazon Associate we earn from qualifying purchases.





Write Your Review
No reviews yet. Be the first to share your experience!