Updated Nov 20, 2026· 10 min read

Key takeaways

  • Cut rebar, angle iron and pipe without a cord. Compare five cordless angle grinders for metal cutting, with specs, safety features and buying advice.

As an Amazon Associate I earn from qualifying purchases. This post may contain affiliate links at no extra cost to you.

⭐ Key Takeaways
Quick answer: Our top pick is Milwaukee M18 FUEL 2880-20, with DEWALT DCG413B 20V MAX XR as a strong alternative.

Cutting metal is the job that separates a serious cordless angle grinder from a light-duty one. Slicing rebar, trimming angle iron, cutting pipe and flush-cutting bolts demand sustained wheel speed under load, a brake that stops the disc quickly, and enough battery capacity to finish a cut list without constant pack swaps. The five grinders below are the strongest current options for metal cutting across the major platforms, from a premium braking model with an 11-amp corded power rating to a budget V20 tool for occasional cuts.

As an Amazon Associate, we earn from qualifying purchases.

Table of Contents

Quick Picks

  • Best overall: Milwaukee M18 FUEL 2880-20 — 8,500 RPM, RAPIDSTOP brake and a published 11-amp corded power equivalent, built for daily metal cutting.
  • Best for DEWALT users: DEWALT DCG413B — brushless 4-1/2 inch grinder with a paddle switch, kickback brake and E-Clutch anti-rotation shutoff.
  • Best ergonomics: Makita XAG04Z — slim barrel grip, automatic speed adjustment under load and feedback sensing that shuts the tool down on a bind.
  • Best slide-switch option: Bosch GWS18V-10N — 9,000 RPM brushless grinder rated equal to a 10-amp corded tool, with KickBack Control.
  • Best budget pick: CRAFTSMAN V20 CMCG400B — 8,500 RPM, tool-free guard and a three-position handle for occasional cutting on the V20 platform.

Milwaukee M18 FUEL 2880-20

Milwaukee M18 FUEL 2880-20

Milwaukee M18 FUEL 2880-20

Check price on Amazon

The 2880-20 is Milwaukee’s braking grinder for the M18 platform, and its published specification sheet reads like a corded tool’s: the POWERSTATE brushless motor is rated to deliver 11-amp corded equivalent power at 8,500 RPM, which is the speed class that thin cut-off wheels are designed around. For metal cutting, that output matters most at the end of a cut, when a weaker grinder slows, heats the workpiece and starts to wander off the line.

The RAPIDSTOP brake stops the wheel quickly when the paddle is released, and the no-lock paddle switch design means the tool cannot be locked on — a meaningful safety trait when a cut-off wheel binds in a kerf. REDLINK PLUS electronics manage overload so the motor pulls back instead of cooking itself or the pack during long cuts in thick stock. The tool accepts both 4-1/2 inch and 5 inch wheels on a standard 5/8-11 spindle, and the guard adjusts without tools for fast repositioning between cutting and grinding setups.

Milwaukee rates the grinder for up to 135 cuts per charge in 1/2 inch rebar on a high-output pack. It is a premium-tier bare tool that makes the most sense for M18 owners who cut metal weekly; compact standard packs are the limiting factor on this class of tool.

Specs

  • Platform: Milwaukee M18, fits all M18 batteries
  • Motor: POWERSTATE brushless, 11-amp corded equivalent output
  • Wheel size: 4-1/2 inch and 5 inch, 5/8-11 spindle
  • No-load speed: 8,500 RPM
  • Switch: paddle, no-lock design
  • Brake: RAPIDSTOP wheel brake
  • Electronics: REDLINK PLUS overload protection
  • Configuration: tool only, battery and charger sold separately
  • Tier: premium

DEWALT DCG413B 20V MAX XR

DEWALT DCG413B 20V MAX XR

The DCG413B is DEWALT’s long-running brushless 4-1/2 inch grinder on the 20V MAX platform, spinning at 9,000 RPM — the highest no-load speed in this roundup. That extra speed suits thin cut-off wheels and light stock, and the brushless motor keeps the tool compact at a published bare weight under four pounds, which reduces fatigue on overhead and vertical cuts.

Safety electronics are the headline. The kickback brake engages when a pinch, stall or bind-up is sensed and stops the wheel in two seconds or less, while the E-Clutch activates in less than a tenth of a second on a bind and shuts the motor down. The paddle switch requires constant pressure, so releasing the tool stops it, and a two-stage trigger design guards against accidental activation during handling and transport.

For cutting work, the quick-change wheel release allows cut-off wheels to be swapped without a wrench, which speeds up the rhythm of cut, grind, and wire-wheel cleanup on fabrication jobs. The guard is a standard adjustable design, and the tool runs on any 20V MAX battery, with larger XR packs recommended for sustained cutting. It sits in the mid-range to premium tier depending on configuration, and it is the natural pick for shops already standardized on DEWALT 20V MAX batteries.

Specs

  • Platform: DEWALT 20V MAX
  • Motor: brushless
  • Wheel size: 4-1/2 inch
  • No-load speed: 9,000 RPM
  • Switch: paddle switch with two-stage trigger
  • Safety: kickback brake, E-Clutch anti-bind shutoff
  • Wheel change: quick-change release, no wrench needed
  • Configuration: tool only, battery and charger sold separately
  • Tier: mid-range to premium

Makita XAG04Z 18V LXT

Makita’s XAG04Z takes a different approach to cutting control. Instead of relying only on raw speed, it uses Automatic Torque Drive Technology, which adjusts rotation speed and torque under load — spinning freely on light cuts and adding torque when the wheel bites into thicker material. Active Feedback-sensing Technology turns the motor off if wheel rotation is suddenly forced to stop, addressing the most common cause of grinder kickback during cut-off work.

The brushless motor delivers 8,500 RPM, and the tool accepts both 4-1/2 inch and 5 inch wheels, giving it the deepest cut capacity in this group when fitted with a 5 inch cut-off wheel. Makita’s slim barrel grip and soft-grip barrel design suit users who cut in varied positions, and the slide switch with lock-on supports longer grinding passes, though cut-off work is best done with the lock-on left unused so the tool can be stopped instantly.

A wire-mesh intake cover keeps debris out of the motor, and anti-restart protection prevents startup when a battery is inserted with the switch on. It is a mid-range bare tool and a strong fit for metalworkers who value control over headline speed numbers.

Specs

  • Platform: Makita 18V LXT
  • Motor: brushless with Automatic Torque Drive Technology
  • Wheel size: 4-1/2 inch and 5 inch
  • No-load speed: 8,500 RPM
  • Switch: slide switch with lock-on
  • Safety: Active Feedback-sensing Technology, anti-restart protection
  • Dust protection: removable wire-mesh intake cover
  • Configuration: tool only, battery and charger sold separately
  • Tier: mid-range

Bosch GWS18V-10N 18V

The GWS18V-10N is Bosch’s compact brushless grinder for the 18V Professional system, rated by Bosch as delivering power equal to a 1,000-watt, roughly 10-amp, corded grinder. Its 9,000 RPM no-load speed matches the DEWALT in this roundup and keeps thin cut-off wheels in their efficient range on sheet, tube and bar stock.

Bosch equips the tool with KickBack Control, which shuts the motor down when a bind is detected, plus restart protection so the grinder will not spin up unexpectedly after a battery change or a power interruption. The slide switch suits users who prefer a set-and-cut grip for longer grinding sessions, and the slim grip circumference and balanced weight distribution are designed for working in tight bays and overhead positions where metal cutting often happens during installation work.

The tool takes 4-1/2 inch and 5 inch wheels, uses a tool-free adjustable guard, and runs on all Bosch Professional 18V batteries, with ProCORE18V packs recommended for maximum output. It is a mid-range to premium bare tool with conventional spindle-and-flange mounting, which accepts the widest range of standard cut-off wheels.

Specs

  • Platform: Bosch Professional 18V
  • Motor: brushless, 1,000-watt corded equivalent rating
  • Wheel size: 4-1/2 inch and 5 inch, 5/8-11 spindle
  • No-load speed: 9,000 RPM
  • Switch: slide switch
  • Safety: KickBack Control, restart protection, overload protection
  • Guard: tool-free adjustable
  • Configuration: tool only (bare tool), battery and charger sold separately
  • Tier: mid-range to premium

CRAFTSMAN V20 CMCG400B

The CMCG400B is the budget-tier entry in this roundup: a brushed-motor V20 grinder rated at 8,500 RPM for 4-1/2 inch wheels. That speed matches the premium tools here, so on thin stock and short cuts in rebar, conduit and angle, the wheel does not know what tier the tool came from. Where the savings show is in runtime and features — there is no electronic brake or anti-kickback clutch, and the brushed motor draws packs down faster under sustained load.

What it does include is the practical hardware for occasional cutting: a tool-free guard that repositions quickly, a three-position side handle for control in different orientations, and a spindle lock for wheel changes with the included wrench. A lock-off switch design reduces accidental starts when the tool is carried or stored.

For a V20 owner who cuts metal a few times a month — trimming bolts, cutting closet rod, shortening threaded rod — the CMCG400B covers the work without paying for fabrication-grade electronics. Daily cutters should step up to one of the brushless models above, but as a first grinder on an existing V20 battery collection, it is a sensible budget buy.

Specs

  • Platform: CRAFTSMAN V20
  • Motor: brushed, high-performance
  • Wheel size: 4-1/2 inch
  • No-load speed: 8,500 RPM
  • Switch: lock-off switch design
  • Guard: tool-free adjustment
  • Handle: three-position side handle
  • Configuration: tool only, battery and charger sold separately
  • Tier: budget

How to Choose a Cordless Angle Grinder for Cutting Metal

Start with the wheel and the cut. Most metal cutting happens on 4-1/2 inch grinders with thin cut-off wheels, which handle rebar, angle, tube, sheet and bolts. A tool that also accepts 5 inch wheels adds cut depth for thicker tube and structural pieces. Match the wheel’s rated speed to the tool’s RPM, and never fit a wheel rated below the grinder’s no-load speed.

Speed is a range, not a race. Cut-off wheels are generally rated around 8,500 to 9,000 RPM in this class, and every tool here sits in that window. Sustained speed under load matters more than the free-spinning number, which is why brushless motors and high-output batteries make a visible difference on long cuts.

Prioritize a brake and bind protection. A cut-off wheel that binds can kick hard. An electronic brake stops the wheel quickly on release, and anti-kickback systems from Milwaukee, DEWALT, Makita and Bosch shut the motor down when a bind is sensed. On a first grinder, these features are worth more than extra RPM.

Choose paddle or slide deliberately. Paddle switches stop the tool the moment your grip relaxes and cannot lock on, which suits cutting. Slide switches with lock-on are comfortable for extended grinding but demand more discipline during cut-off work. Many fabricators own the paddle version for cutting and treat lock-on as a grinding-only feature.

Budget the batteries, not just the tool. Cutting draws a battery down faster than almost any other handheld job. Plan on high-capacity or high-output packs — one on the tool, one on the charger — and stay inside one platform so packs rotate across your other tools. Compare complete working setups, not tool-only tags.

Dress for the work. Cutting metal calls for eye and face protection, hearing protection, the guard always fitted between you and the cut, and a check that the wheel is undamaged and correctly rated before the battery goes in.

FAQ

Can a cordless angle grinder cut through rebar and angle iron?

Yes. Every grinder in this roundup will cut rebar, angle iron and similar stock with a thin cut-off wheel rated for the tool’s speed. Brushless models with high-output batteries hold speed better through the cut, while budget brushed tools handle the same work in shorter sessions with more frequent battery changes.

Is a paddle switch or a slide switch better for cutting metal?

A paddle switch is generally the safer choice for cutting because the tool stops as soon as your grip relaxes and it cannot be locked on. Slide switches with lock-on are comfortable for long grinding passes, but for cut-off work most users prefer the instant stop control of a paddle.

What size battery does a cordless grinder need for cutting?

Grinders are high-draw tools, so mid-size and high-output packs in the 4.0 to 8.0 amp-hour class are the practical choice for cutting sessions. Compact 2.0 amp-hour packs work for a few quick cuts but will typically run down or trigger overload protection quickly under sustained cutting load.

Can the same grinder cut metal and grind welds?

Yes, by changing wheels. Thin cut-off wheels are for cutting only and should never be used on their side; thicker grinding wheels and flap discs handle weld dressing and surface work. Keep the guard fitted for both jobs, check each wheel’s speed rating, and let the wheel stop fully before setting the tool down.

Conclusion

For regular metal cutting, the Milwaukee 2880-20 pairs corded-class output with the fastest-stopping brake package here, and the DEWALT DCG413B answers with higher wheel speed and equally serious bind protection for 20V MAX owners. The Makita XAG04Z is the control specialist, the Bosch GWS18V-10N is the slide-switch pick with 9,000 RPM brushless power, and the CRAFTSMAN CMCG400B keeps occasional cutting affordable on the V20 platform. Match the grinder to the batteries you already own, insist on a brake if you cut often, and size your battery rotation for the cut list — the wheel will do the rest.

L
Loa Power Tools Editorial Team
We compare specs, warranty terms, long-term owner feedback and street pricing before anything earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
Best Cordless Angle Grinders for Cutting Metal in…Check price on Amazon

Related guides

Browse all Product Guides guides →

More from Amazon

Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

Amazon Business

A free business account with business pricing and bulk-buying tools for work, shop or home office.

Create a business account
Amazon Prime

Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

Start a Prime free trial
Audible

Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

Try Audible free
Amazon Music Unlimited

Ad-free music streaming. Eligible new subscribers can start with a free trial.

Try Music Unlimited free

As an Amazon Associate we earn from qualifying purchases.