Updated Nov 19, 2026· 8 min read

Key takeaways

  • Compare five jointers by cutting width, cutterhead, motor, table, and fence, and find the right benchtop or floor-standing machine for your shop today.

As an Amazon Associate I earn from qualifying purchases. This post may contain affiliate links at no extra cost to you.

Short Answer

The best jointer for most home workshops is the WEN JT630H. Its 6-inch spiral cutterhead, 10-amp motor, and 30-inch table cover edge jointing and face flattening for most furniture and cabinet projects. If you regularly joint boards wider than 6 inches, the Wahuda 50180CC-WHD is the better benchtop step up, with an 8-inch spiral cutterhead and cast iron tables. For a dedicated shop, the JET JJ-6HHDX adds a helical cutterhead and a long bed for full-length boards. The PORTER-CABLE PC160JT and the CRAFTSMAN CMEW020 both offer variable speed on a 6-inch two-knife head for delicate or figured stock.

As an Amazon Associate, we earn from qualifying purchases.

Table of Contents

How to Choose a Jointer

A jointer flattens one face of a board and squares one edge to that face, creating the reference surfaces for everything that follows. A thickness planer then makes the opposite face parallel. A jointer cannot thickness a board, and a planer cannot flatten a twisted board on its own.

Cutting width is the first decision. Six inches covers most furniture stock, cabinet parts, and drawer sides. Eight inches handles wider work such as table tops glued up from broad planks.

Cutterhead type is the second decision. A straight-knife head uses two or three long knives; replacements are inexpensive, but straight knives can tear out figured grain. A spiral or helical head uses many small inserts in rows that shear the wood in shallow cuts, reducing tear-out and running quieter, and a nicked insert rotates to a fresh edge. A full set of inserts costs more than a set of straight knives.

Motor power follows cutting width. Benchtop jointers here use 10-amp motors on a household circuit, enough for shallow passes in hardwoods. Floor-standing jointers use 1-horsepower motors or larger and hold speed better through deep cuts. Table length decides how long a board you can flatten: a 30-inch table supports boards up to roughly three feet, while longer tables and pull-out extensions stretch that reach. A center-mounted fence gives even support on both sides of the cutterhead, and a tilting fence cuts bevels. Check that the fence locks solidly at square: a drifting fence shows up in every glue joint.

The 5 Best Jointers at a Glance

Jointer Cutting Width Cutterhead Motor Best For
WEN JT630H 6 in Spiral, 12 HSS blades 10 amp Best overall 6-inch benchtop
Wahuda 50180CC-WHD 8 in Spiral, 4-sided carbide inserts 10 amp Best 8-inch benchtop
JET JJ-6HHDX 6 in Helical, 27 carbide inserts 1 HP Best floor-standing helical
PORTER-CABLE PC160JT 6 in Two straight knives 10 amp Best variable-speed 6-inch
CRAFTSMAN CMEW020 6 in Two straight knives 10 amp Best simple variable-speed pick
The 5 Best Jointers at a Glance

The 5 Best Jointers at a Glance

Check price on Amazon

The 5 Best Jointers at a Glance

The 5 Best Jointers at a Glance

Check price on Amazon

1. WEN JT630H — Best Overall 6-Inch Spiral Benchtop Jointer

The WEN JT630H is the most balanced benchtop jointer in this guide. Its spiral cutterhead carries 12 staggered high-speed steel blades that shear the wood in shallow cuts, keeping tear-out low on figured grain. The 10-amp motor drives a 6-inch cutting width with a maximum depth of 1/8 inch per pass, and the manual recommends 1/32 inch per pass for the cleanest finish. The table measures 30 by 6-3/16 inches and supports boards up to about three feet long; the fence measures 19-3/4 by 4-1/4 inches and bevels to 45 degrees. At 36.8 pounds it lifts on and off a bench. Note: the manual lists 11,000 RPM while some retailer copy lists 12,000; the manual figure is the one to plan around.

Spec Detail
Model JT630H
Cutting width 6 in
Max depth per pass 1/8 in
Recommended depth per pass 1/32 in
Cutterhead Spiral, 12 staggered HSS blades
Cutterhead speed 11,000 RPM
Motor 10 amp, 120V, 60 Hz
Table size 30 x 6-3/16 in
Fence size 19-3/4 x 4-1/4 in, bevels to 45 degrees
Weight 36.8 lb
Warranty 2 years
Replacement blades BP510H
ASIN B08M6KQ5LX

2. Wahuda 50180CC-WHD — Best 8-Inch Benchtop Jointer

The Wahuda 50180CC-WHD is the pick for woodworkers who keep hitting the 6-inch limit. Its 8-inch spiral cutterhead uses four-sided carbide inserts, so a nicked edge rotates to a fresh cutting face. The 10-amp motor runs at a fixed 12,000 RPM, and the cast iron tables stay flat under wide boards, with pull-out extensions for longer stock. The fence tilts from 90 to 135 degrees for bevel jointing as well as square edges. The machine measures 34 by 14 by 13 inches. Published weight varies: the listing mirror shows 49.9 pounds while another roundup lists 64 pounds, so plan on the heavier figure. Two listing details need attention: the Part Number field reads 50110CC-WHD while the Item model number reads 50180CC-WHD-Amazon, so confirm the 8-inch size, since 50110CC-WHD is Wahuda’s separate 10-inch model. Listing copy also shows 120V while one comparison spec row shows 115V.

Spec Detail
Model 50180CC-WHD
Cutting width 8 in
Cutterhead Spiral, 4-sided carbide inserts
Motor 10 amp
Cutterhead speed 12,000 RPM
Tables Cast iron with pull-out extensions
Fence Tilts 90 to 135 degrees
Dimensions 34 x 14 x 13 in
Weight 49.9 lb (listing); 64 lb (roundup)
ASIN B0855RZPYT

3. JET JJ-6HHDX — Best Floor-Standing Helical Jointer

The JET JJ-6HHDX is the only floor-standing jointer in this guide, and it earns its place for shops that joint long boards every week. Its helical cutterhead carries 27 four-sided carbide inserts that shear the grain in small overlapping cuts for a glue-ready surface with very little tear-out. The 1-horsepower motor runs on 115 or 230 volts, single phase, and the long bed measures 56 by 21 by 36 inches overall, supporting full-length boards better than any benchtop table. At 237 pounds it needs a permanent home, ideally on a mobile base. JET lists the model as not discontinued by the manufacturer, and the JJ-6 series carries JET’s five-year warranty. It suits shops that have outgrown a benchtop jointer.

Spec Detail
Model JJ-6HHDX
Cutting width 6 in
Cutterhead Helical, 27 four-sided carbide inserts
Motor 1 HP, 115/230V, 1 phase
Overall dimensions 56 x 21 x 36 in
Weight 237 lb
Part number 708466DXK
UPC 662755955952
Warranty 5 years
Discontinued No
ASIN B0011TLVEI

4. PORTER-CABLE PC160JT — Best Variable-Speed 6-Inch Jointer

The PORTER-CABLE PC160JT is built around one idea: cutterhead speed should match the wood. Its 10-amp, 120-volt motor offers a variable speed range of 6,000 to 11,000 RPM, or 12,000 to 22,000 cuts per minute across the two-knife cutterhead. Cutting capacity is 6 inches wide and 1/8 inch deep per pass. The center-mounted fence measures 19-3/4 by 4-1/4 inches and tilts from 90 to 45 degrees. The machine measures 32.1 by 12.4 by 11.2 inches at 35 pounds. Two notes: a roundup reports the model discontinued by the maker while remaining available online, so confirm the listing, and sources disagree on the table material, so it is best described as a metal table.

Spec Detail
Model PC160JT
Cutting width 6 in
Max depth per pass 1/8 in
Cutterhead Two straight knives
Motor 10 amp, 120V
Speed range 6,000 to 11,000 RPM
Cutting speed 12,000 to 22,000 cuts per minute
Fence Center-mounted, 19-3/4 x 4-1/4 in, tilts 90 to 45 degrees
Table length 30 in
Overall dimensions 32.1 x 12.4 x 11.2 in
Weight 35 lb
Minimum stock 10 in long, 3/4 in wide, 1/2 in thick
Included Dust chute, vacuum hose adaptor, cutterhead guard and lock, wrenches, push blocks
ASIN B004Q0I8YU

5. CRAFTSMAN CMEW020 — Best Simple Variable-Speed Pick

The CRAFTSMAN CMEW020 covers the same ground as the PORTER-CABLE with a simpler pitch: variable speed, a two-knife head, and a center-mounted fence. Its 10-amp motor runs from 6,000 to 11,000 RPM and delivers up to 22,000 cuts per minute, with slower speeds for delicate stock and faster speeds for straight-grained hardwood. The cutting width is 6 inches, and the two-knife cutterhead uses a jackscrew leveling system that makes knife changes easier than shimming by hand. The center-mounted fence is 4-1/4 inches tall. One reading trap: some roundups list a 4.25-inch cutting width, but that figure is the fence height, not the cutting width; the listing confirms 6 inches.

Spec Detail
Model CMEW020
Cutting width 6 in
Cutterhead Two straight knives, jackscrew knife leveling
Motor 10 amp, 120V
Speed range 6,000 to 11,000 RPM
Cutting speed Up to 22,000 cuts per minute
Fence Center-mounted, 4-1/4 in tall
Weight 40 lb
Power source Corded electric
ASIN B07Y476PHF

Frequently Asked Questions

What is the difference between a jointer and a planer?

A jointer flattens one face of a board and squares one edge to that face. A planer makes the opposite face parallel and brings the board to uniform thickness. The jointer creates the reference surfaces, and the planer works from them. A twisted board needs the jointer first.

What size jointer do I need for furniture projects?

A 6-inch jointer covers most furniture work: drawer sides, cabinet parts, legs, and rails. Step up to 8 inches for table tops and wide panels. A 30-inch table handles boards up to about three feet; longer stock benefits from extensions or a long-bed floor jointer.

Are spiral cutterheads worth it over straight knives?

A spiral or helical head uses many small inserts that shear the grain in shallow cuts, reducing tear-out on figured wood and running quieter, and a nicked insert rotates to a fresh edge. Straight knives cost less to replace and are simpler to sharpen.

Can a benchtop jointer flatten long boards?

A benchtop jointer can flatten boards a little longer than its table if the board is supported and fed steadily, but table length sets the practical limit. Pull-out extensions and roller stands help. For boards much longer than three feet, a long-bed floor jointer such as the JET JJ-6HHDX gives a flatter result.

Conclusion

The WEN JT630H is the best jointer for most home workshops: a 6-inch spiral cutterhead, a 10-amp motor, and a 30-inch table cover the milling that furniture and cabinet projects need. The Wahuda 50180CC-WHD is the step up for wider boards, with an 8-inch spiral head and cast iron tables that extend for longer stock. The JET JJ-6HHDX is the premium choice for a dedicated shop, with a helical cutterhead and a long bed for full-length lumber. The PORTER-CABLE PC160JT and the CRAFTSMAN CMEW020 both add variable speed to a 6-inch two-knife head. Pick by cutting width first, then by cutterhead type, and check the fence and table length before ordering.

L
Loa Power Tools Editorial Team
We compare specs, warranty terms, long-term owner feedback and street pricing before anything earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
Best Jointers for Flat Faces and Square Edges…Check price on Amazon

Related guides

Browse all Product Guides guides →

More from Amazon

Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

Amazon Business

A free business account with business pricing and bulk-buying tools for work, shop or home office.

Create a business account
Amazon Prime

Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

Start a Prime free trial
Audible

Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

Try Audible free
Amazon Music Unlimited

Ad-free music streaming. Eligible new subscribers can start with a free trial.

Try Music Unlimited free

As an Amazon Associate we earn from qualifying purchases.