Updated Nov 20, 2026· 7 min read

Key takeaways

  • The best magnetic parts trays keep screws, bolts and small parts from rolling away. Compare 5 steel and silicone trays by size, shape and magnet setup.

As an Amazon Associate I earn from qualifying purchases. This post may contain affiliate links at no extra cost to you.

⭐ Key Takeaways
Quick answer: Our top pick is HORUSDY 3-Piece Round Magnetic Tray Set, with Performance Tool W1265 Large Magnetic Nut and Bolt Tray as a strong alternative.

Every teardown has a moment where a screw rolls off the bench, drops into the grass, or hides under the tool chest, and the job stalls while you hunt for it. A magnetic parts tray ends that problem for very little money: fasteners tossed into the dish stay put, the tray itself clings to steel surfaces, and the hardware you removed in order goes back in the same order.

The five trays below cover the main shapes and materials on the market, from a tiny 4-1/4 inch mini bowl for electronics work to a four-piece collapsible silicone set that folds flat in a drawer. They are ranked by how much hardware they hold, how firmly the magnet grips, and how well the base protects painted or finished surfaces.

As an Amazon Associate, we earn from qualifying purchases.

Quick answer

For most workshops, the HORUSDY 3-Piece Round Magnetic Tray Set is the easiest buy, since its 3, 4 and 6 inch stainless bowls cover small, medium and large jobs in one purchase. Choose the Performance Tool W1265 if you want one large rectangular tray with two magnets, and pick the WORKPRO collapsible set if bench space is tight and you need trays that fold away.

1. HORUSDY 3-Piece Round Magnetic Tray Set

HORUSDY 3-Piece Round Magnetic Tray Set

HORUSDY 3-Piece Round Magnetic Tray Set

Check price on Amazon

Three round stainless steel bowls in 3, 4 and 6 inch diameters make this the most flexible budget buy in the group. The small bowl suits driver bits and machine screws at the bench, the mid-size bowl handles carburetor and brake hardware, and the 6 inch bowl holds the full fastener set from a small engine or appliance teardown. The magnet in each base pulls through the dish, so parts stay in place even when the tray is stuck to a vertical steel surface such as a lift post or the side of a tool cabinet.

Specs

  • Sizes: 3 in, 4 in and 6 in round bowls
  • Material: stainless steel
  • Pieces: 3
  • Model: 97828
  • Tier: budget

2. Performance Tool W1265 Large Magnetic Nut and Bolt Tray

Performance Tool W1265 Large Magnetic Nut and Bolt Tray

Performance Tool W1265 Large Magnetic Nut and Bolt Tray

Check price on Amazon

The W1265 is the big single tray of the group, a rectangular stainless dish measuring 9-1/2 by 5-1/2 inches with two magnets under the base. The extra magnet matters on a long tray: both ends grip, so a tray loaded with lug nuts or suspension bolts does not pivot or slide when you bump it. The rectangular footprint also lines up neatly along the edge of a bench or the top of a roll cabinet, and the long shape suits sorting hardware in a row as it comes off the job.

Specs

  • Dimensions: 9-1/2 x 5-1/2 in
  • Material: stainless steel
  • Magnets: 2
  • Model: W1265
  • Tier: mid-range

3. WORKPRO 4-Piece Collapsible Magnetic Parts Tray Set

WORKPRO 4-Piece Collapsible Magnetic Parts Tray Set

WORKPRO 4-Piece Collapsible Magnetic Parts Tray Set

Check price on Amazon

This set takes a different approach: four silicone trays that stand up as bowls while you work and fold flat when the job is done. The set mixes 11 inch and 6.3 inch trays, and the magnetic base works from both sides, so a tray can sit on the bench holding parts or stick to a steel panel with the parts held inside. Silicone shrugs off solvents and oily hardware, will not scratch paint, and the bright colors make a dropped screw easy to spot. For mobile mechanics and anyone whose workshop is a single drawer, the fold-flat design is the main event.

Specs

  • Sizes: 11 in and 6.3 in trays
  • Material: silicone with magnetic base
  • Pieces: 4, collapsible
  • Model: W133814AE
  • Tier: mid-range

4. Titan 21265 Rectangular Magnetic Parts Tray

Titan 21265 Rectangular Magnetic Parts Tray

Titan 21265 Rectangular Magnetic Parts Tray

Check price on Amazon

Titan’s rectangular tray measures 5-3/8 by 9-3/8 inches, a useful middle size between the round bowls and the full-length W1265. The stainless dish resists the oil, brake cleaner and solvent splashes of daily shop work, and the magnet base is covered so it grips steel without marking the surface underneath. It is a plain, proven design that suits a dedicated spot on the bench for the hardware of whatever you are rebuilding, from a chainsaw carburetor to a set of caliper bolts.

Specs

  • Dimensions: 5-3/8 x 9-3/8 in
  • Material: stainless steel
  • Shape: rectangular
  • Model: 21265
  • Tier: mid-range

5. Titan 11061 Mini Magnetic Parts Tray

Titan 11061 Mini Magnetic Parts Tray

Titan 11061 Mini Magnetic Parts Tray

Check price on Amazon

At 4-1/4 inches across, the Titan 11061 is the tray you keep within reach for small work: watch and electronics screws, model parts, gun screws, and the tiny fasteners that come out of power tool housings during a switch or brush change. The polished stainless bowl is small enough to sit on a crowded bench or stick to the side of a parts washer, and its magnet holds even the smallest steel screws against a knock. It is a single-purpose pick, but for fine work it beats fishing screws out of a big tray.

Specs

  • Diameter: 4-1/4 in
  • Material: stainless steel, polished finish
  • Shape: round
  • Model: 11061
  • Tier: budget

How to choose

Begin with the size of the hardware you handle most. A single 6 inch round bowl or a mid-size rectangle covers most automotive and small-engine work, while long trays earn their keep on jobs with many fasteners that need to stay in removal order. If you work on several projects at once, a multi-piece set lets you give each job its own tray instead of mixing hardware.

Material is the second call. Stainless steel is the default for good reason: it ignores solvents, wipes clean, and lasts. Silicone trays trade some rigidity for a surface that never scratches paint and folds flat for storage, which matters in a mobile kit. Check the base, too. A covered or rubber-coated magnet protects finished surfaces and still grips; a bare magnet holds hardest but can mark paint. Finally, remember that only ferrous hardware sticks. Stainless, brass and aluminum fasteners will sit in the tray but will not be held, so keep that in mind for marine and outdoor work.

Who should skip

Skip a magnetic tray if most of your hardware is non-ferrous, since aluminum, brass and many stainless fasteners will not be held at all. Skip the mini sizes if your work is mostly suspension, wheel and engine hardware, because a 4 inch bowl fills up fast. And if you work around sensitive electronics, machining setups or anything with magnetic media, keep in mind that a strong tray magnet belongs on the bench, not near the workpiece, in those jobs.

FAQ

Will a magnetic tray hold parts when it is stuck to a vertical surface?

Yes, within reason. The magnet grips the steel surface and holds light steel hardware in the dish, which is why mechanics stick trays to lift posts and fenders. Heavy parts belong in a tray sitting flat, since a vertical tray holds by magnet force alone.

Do magnetic trays work on stainless steel screws and bolts?

Often not. Many stainless fasteners are only weakly magnetic or not magnetic at all, and the same goes for brass and aluminum hardware. The tray still works as a dish for those parts, but it will not hold them against a knock.

Can a strong magnet damage tools or electronics?

A parts tray magnet is modest and is meant for bench hardware, so normal tools are unaffected. Keep trays away from magnetic storage media, credit cards and sensitive measuring gear as a sensible precaution, and avoid sliding a bare-magnet tray across painted panels.

How do I clean a magnetic parts tray?

Wipe steel trays out with a shop towel; a little solvent on the towel clears oily residue. Run a gloved hand or a piece of tape over the base to pull off the metal filings and grinding dust that collect on the magnet, since that swarf builds up over time.

Final verdict

The HORUSDY three-piece round set is the right first purchase for most readers, because three sizes cover nearly every job and the set sits firmly in the budget tier. Add the Performance Tool W1265 when you want one long tray with two-magnet grip, choose the WORKPRO set if storage space is your limiting factor, and keep the Titan 11061 on the bench for fine work. Any of the five will end the lost-screw hunt that slows down every teardown.

L
Loa Power Tools Editorial Team
We compare specs, warranty terms, long-term owner feedback and street pricing before anything earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
Best Magnetic Parts Trays: 5 Picks for the…Check price on Amazon

Related guides

Browse all Product Guides guides →

More from Amazon

Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

Amazon Business

A free business account with business pricing and bulk-buying tools for work, shop or home office.

Create a business account
Amazon Prime

Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

Start a Prime free trial
Audible

Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

Try Audible free
Amazon Music Unlimited

Ad-free music streaming. Eligible new subscribers can start with a free trial.

Try Music Unlimited free

As an Amazon Associate we earn from qualifying purchases.