Key takeaways
- Compare the best router bit sets for woodworking: carbide sets in quarter-inch and half-inch shanks, from a 13-piece starter kit to a 70-piece shop set.
What's inside
- Table of Contents
- Freud 90-100 15-Piece Advanced Router Bit Set
- Bosch RBS015MBS 15-Piece Carbide-Tipped Router Bit Set
- Yonico 17702 70-Piece Professional Router Bit Set
- CMT 800.505.11 13-Piece Router Bit Set
- MLCS 8377 15-Piece Router Bit Set
- How to Choose a Router Bit Set
- Who Should Skip These Sets
- Frequently Asked Questions
- Conclusion
- Table of Contents
- Freud 90-100 15-Piece Advanced Router Bit Set
- Bosch RBS015MBS 15-Piece Carbide-Tipped Router Bit Set
- Yonico 17702 70-Piece Professional Router Bit Set
- CMT 800.505.11 13-Piece Router Bit Set
- MLCS 8377 15-Piece Router Bit Set
- How to Choose a Router Bit Set
- Who Should Skip These Sets
- Frequently Asked Questions
- Conclusion
As an Amazon Associate I earn from qualifying purchases. This post may contain affiliate links at no extra cost to you.
Home › Product Guides › Best Router Bit Sets: 5 Picks for Woodworking Shops
The best router bit set for most woodworkers is a 15-piece carbide-tipped set with straight, roundover, chamfer, cove, flush trim, and dovetail profiles. That covers edge shaping, grooves, joinery, and template work without buying bits one at a time. Shank size matters more than piece count: quarter-inch shanks suit trim and palm routers, while half-inch shanks suit full-size routers and router tables.
The five sets below span both shank sizes. A 15-piece Freud set leads for full-size routers, a Bosch 15-piece set fits trim routers, a 70-piece Yonico set stocks a whole shop at once, a 13-piece CMT set brings Italian-made cutters in a wooden case, and a 15-piece MLCS set covers the basics at a lower tier.
As an Amazon Associate, we earn from qualifying purchases.
Table of Contents
- Freud 90-100 15-Piece Advanced Router Bit Set
- Bosch RBS015MBS 15-Piece Carbide-Tipped Router Bit Set
- Yonico 17702 70-Piece Professional Router Bit Set
- CMT 800.505.11 13-Piece Router Bit Set
- MLCS 8377 15-Piece Router Bit Set
- How to Choose a Router Bit Set
- Who Should Skip These Sets
- Frequently Asked Questions
- Conclusion
- Product and ASIN Reference
Freud 90-100 15-Piece Advanced Router Bit Set
The Freud 90-100 is the strongest all-round pick for a full-size router: 15 carbide-tipped bits on half-inch shanks, covering the profiles a woodworker reaches for first: roundover, V-groove, chamfer, and flush trim. Freud builds these bits with TiCo Hi-Density carbide and a Perma-Shield coating that resists pitch buildup, and the half-inch shanks give a stiffer, steadier cut than quarter-inch shanks in a full-size router or table.
This set suits a serious shop that wants one box for edge work, joinery, and pattern routing. Fifteen pieces cover the common profiles without the filler that pads out the biggest bulk sets. Buyers should confirm the router accepts a half-inch collet, since these bits do not fit a trim router. The case keeps each profile separated and protected, which matters because carbide edges chip when bits knock together in a drawer.
| Feature | Detail |
|---|---|
| ASIN | B00002260I |
| Model | 90-100 |
| Pieces | 15 |
| Shank | 1/2 inch |
| Cutter | TiCo Hi-Density carbide, Perma-Shield coating |
| Profiles | Roundover, V-groove, chamfer, flush trim, and more |
Bosch RBS015MBS 15-Piece Carbide-Tipped Router Bit Set
The Bosch RBS015MBS is the pick for trim and palm routers. Its 15 carbide-tipped bits ride on quarter-inch shanks, which fit nearly every compact router. The set covers chamfer, dovetail, V-groove, slotting, rabbeting, top bearing straight trim, double-flute flush laminate trim, Roman ogee, cove, roundover, and double-flute straight bits. An anti-friction coating helps the bits move through the cut, and the clear plastic case keeps each profile easy to find.
Choose this set when the router in hand is a compact model, or when most work is edge trimming, laminate work, and small profiles rather than heavy table routing. Quarter-inch shanks deflect more than half-inch shanks under load, so deep or wide cuts should be made in shallow passes. The dovetail bit measures 12 degrees by 9/16 inch and the V-groove bit measures 60 degrees by 5/8 inch, covering common small-joint and sign-making sizes. Buyers with only a full-size router should pick a half-inch set instead, since a quarter-inch bit needs a reducer sleeve to fit.
| Feature | Detail |
|---|---|
| ASIN | B0B71S7YTM |
| Model | RBS015MBS |
| Pieces | 15 |
| Shank | 1/4 inch |
| Cutter | Carbide-tipped, anti-friction coating |
| Case | Clear plastic case |
| Profiles | Chamfer, dovetail, V-groove, slotting, rabbeting, Roman ogee, cove, roundover, flush trim, straight |
Yonico 17702 70-Piece Professional Router Bit Set
The Yonico 17702 is the bulk buy: 70 carbide-tipped bits on half-inch shanks in a wooden case, covering nearly every profile a home shop needs. Yonico lists C3 micro-grain carbide tips, hardened steel bodies, and a nonstick coating that resists pitch buildup. The case measures about 19.25 by 15.25 by 4.75 inches and the set weighs about 13.62 pounds, so it is a bench item rather than a portable kit.
A 70-piece set makes sense for a woodworker who wants to try profiles before committing to premium single bits, or who runs a busy shop and wants spares on hand. The trade-off is that some profiles will sit unused, and the per-bit carbide quality is a step below the premium makers. That trade suits a home shop, less so a production shop where edge life drives the schedule. The Amazon listing crawl noted no featured offers at the time of checking, so buyers should confirm the live offer before ordering.
| Feature | Detail |
|---|---|
| ASIN | B00KZM2Z6A |
| Model | 17702 |
| Pieces | 70 |
| Shank | 1/2 inch |
| Cutter | C3 micro-grain carbide, nonstick coating |
| Case | Wooden case, about 19.25 x 15.25 x 4.75 inches |
| Weight | About 13.62 pounds |
CMT 800.505.11 13-Piece Router Bit Set
The CMT 800.505.11 is the mid-premium pick: 13 bits on half-inch shanks from the Italian maker, packed in a hardwood case with an orange PTFE nonstick coating. CMT uses its SinterHip carbide, and the set covers the core profiles without filler: three double-flute straight bits, a mortising bit, a round nose bit, a V-groove bit, a dovetail bit, a cove bit, a rabbeting bit, a rounding over bit, a Roman ogee bit, a chamfer bit, and a bearing flush trim bit.
This set suits a woodworker who wants better carbide than a budget set and a case that will last, but does not need 15 or 70 pieces. Thirteen pieces cover edge shaping, grooves, dovetails, and template work, and the three straight bits in different diameters cover most dado and mortise sizes. The compact wooden case keeps the bits indexed, which helps in a small shop. Buyers should check that the router accepts half-inch shanks, and note that the set has no spiral bits, so plunge work in thick stock still calls for a dedicated spiral cutter.
| Feature | Detail |
|---|---|
| ASIN | B000BJJY4I |
| Model | 800.505.11 |
| Pieces | 13 |
| Shank | 1/2 inch |
| Cutter | SinterHip carbide, orange PTFE coating |
| Case | Hardwood case |
| Profiles | 3 straight, mortising, round nose, V-groove, dovetail, cove, rabbeting, roundover, Roman ogee, chamfer, flush trim |
MLCS 8377 15-Piece Router Bit Set
The MLCS 8377 is the value pick for a first full-size set. It holds 15 carbide-tipped bits on half-inch shanks in a wooden box, covering the profiles a beginner needs: four straight bits plus roundover, cove, Roman ogee, 45-degree chamfer, flush trim, rabbeting, dovetail, V-groove, hinge mortising, panel pilot, and round nose bits. The set weighs about 2.45 pounds, so it is easy to carry or store.
This set fits a woodworker buying a first set for a full-size router who wants the widest coverage for the least outlay. The carbide tips are serviceable for home-shop use, though they will not hold an edge as long as premium bits under heavy use. The sensible response is to replace the two or three most-used profiles with premium singles when they wear, rather than replacing the whole set. The wooden box keeps the bits organized and protected, which helps the edges last longer.
| Feature | Detail |
|---|---|
| ASIN | B000FJRN8S |
| Model | 8377 |
| Pieces | 15 |
| Shank | 1/2 inch |
| Cutter | Carbide-tipped |
| Case | Wooden box |
| Weight | About 2.45 pounds |
| Profiles | 4 straight, roundover, cove, Roman ogee, chamfer, flush trim, rabbeting, dovetail, V-groove, hinge mortising, panel pilot, round nose |
How to Choose a Router Bit Set
Start with the shank. Match the set to the collet on the router that will use it: quarter-inch shanks for trim and palm routers, half-inch shanks for full-size routers and router tables. A half-inch shank resists deflection better in deep cuts, which is why four of the five sets here use half-inch shanks, while the Bosch set uses quarter-inch shanks for compact routers.
Next, count the profiles that will actually get used. A set earns its place when most of its bits match real jobs: straight bits for dados and grooves, roundover and chamfer bits for edges, flush trim bits for templates and laminate, and a dovetail bit for joinery. Sets of 13 to 15 pieces usually cover those jobs without much filler, while a 70-piece set adds variety that may never leave the case.
Carbide quality decides edge life. Carbide-tipped bits are the standard for home shops, and premium carbide holds an edge longer in abrasive sheet goods such as plywood and MDF. Coatings that resist pitch buildup help keep cuts clean, and a case that holds each bit separately protects the carbide edges from chips. Check the maximum speed rating on the largest bits, since large cutters must run slower than small ones.
Who Should Skip These Sets
A woodworker who already owns the core profiles as singles should skip a full set and buy only the missing profiles. A set duplicates bits already in the drawer, and the money is better spent on one premium bit in the profile used daily.
Anyone with only a trim router should skip the half-inch sets in this guide. Half-inch shanks do not fit a quarter-inch collet, and a reducer sleeve is not a safe substitute for a proper collet. The Bosch RBS015MBS is the quarter-inch option here.
A production shop running long hours in abrasive sheet goods should also look past the budget and mid-tier sets. Premium single bits hold an edge longer under that workload, and the cost of downtime for bit changes outweighs the savings of a boxed set. For that shop, a set is still useful as a backup box, but the daily bits should be premium singles.
Frequently Asked Questions
What shank size should a router bit set have?
Match the shank to the router collet. Quarter-inch shanks fit trim and palm routers, while half-inch shanks fit full-size routers and router tables. A half-inch shank is stiffer and deflects less in deep cuts, so it is the better default where the router accepts it.
How many pieces does a first router bit set need?
A set of 13 to 15 pieces covers the profiles most woodworkers use: straight, roundover, chamfer, cove, flush trim, rabbeting, dovetail, and V-groove bits. Larger sets add variety, but a beginner uses only a handful of profiles regularly, so a focused set is usually the better first buy.
Are carbide-tipped bits good enough for a home shop?
Yes, for most home-shop work. Carbide-tipped bits hold an edge far longer than high-speed steel in plywood, MDF, and hardwoods. Premium carbide lasts longer still, so many woodworkers start with a carbide-tipped set and replace the most-used profiles with premium singles as they wear.
Can a router bit set cut metal or plastic?
These sets are made for wood and wood composites. Some bits can trim plastic laminate, and the Bosch set includes a laminate trim bit for that purpose. Standard woodworking bits are not the right choice for metal, which calls for a cutter rated for that material and machine.
Conclusion
A good router bit set matches the router first and the work second. The Freud 90-100 is the strongest all-round set for a full-size router, the Bosch RBS015MBS is the right call for trim routers, the Yonico 17702 stocks a whole shop in one box, the CMT 800.505.11 brings Italian-made cutters in a hardwood case, and the MLCS 8377 covers the basics at the value tier. Check the shank size, count the profiles that will get used, and confirm the live offer before ordering.
Related guides
Read next
- Best Socket Sets for Home Shops, Garages, and Autos
- Best Forstner Bit Sets for Clean Flat-Bottom Holes in Wood
- Best Chisel Sets for Woodworking: 5 Picks Compared
- The 5 Best Wood Routers for Home Woodshops in 2026
- Best Router Table Fences for Precise, Repeatable Cuts
- Best Biscuit Joiners for Strong, Clean Wood Joints
More from Amazon
Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.
A free business account with business pricing and bulk-buying tools for work, shop or home office.
Create a business accountFree shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.
Start a Prime free trialAudiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.
Try Audible freeAd-free music streaming. Eligible new subscribers can start with a free trial.
Try Music Unlimited freeAs an Amazon Associate we earn from qualifying purchases.

Write Your Review
No reviews yet. Be the first to share your experience!