Key takeaways
- Compare the best sawhorses on published specs alone: load capacity per pair, steel and molded frames, folding legs, height adjustment and table arms.
As an Amazon Associate I earn from qualifying purchases. This post may contain affiliate links at no extra cost to you.
Home › Product Guides › Best Sawhorses: 5 Folding Picks for Shop and Jobsite
A good pair of sawhorses turns any flat patch of floor into a cutting station, an assembly table or a painting stand, then folds away when the work is done. The catch is that headline load ratings are hard to compare at a glance: some makers rate each sawhorse on its own, others rate the pair, and the gap between the lightest folding set and a heavy steel frame runs from a few hundred pounds to several thousand. Materials, leg design and extras such as 2×4 support arms or built-in clamps matter just as much.
This guide compares five folding sawhorses across the premium, mid-range and budget tiers, using published specifications only. Each pick lists its load capacity with the basis stated plainly, plus frame material, folding design, height adjustment and weight where the maker publishes it. Singles and pairs are labeled as such, because one listing here is sold one sawhorse at a time.
As an Amazon Associate, we earn from qualifying purchases.
Quick answer
For heavy cutting and table work, the ToughBuilt C700 is the strongest single pick, with a 1,300 lb rating per sawhorse, telescopic legs and support arms that accept 2×4 and 4×4 lumber. The Bora Portamate Speedhorse pair deploys fastest and carries the highest pair rating here. On a budget, the Amazon Basics folding set covers light cutting and painting work.
The best sawhorses
ToughBuilt C700 Sawhorse and Jobsite Table (TB-C700)
The C700 is the heavy-duty anchor of this group. It is built from 100 percent high-grade steel with powder-coated and zinc-plated surfaces, and ToughBuilt rates it at 1,300 lb for a single sawhorse and 2,600 lb per pair. Telescopic legs adjust the working height and end in pivoting feet, so the top stays level on gravel and sloped concrete where fixed legs rock. Adjustable support arms grip 2×4 or 4×4 lumber, letting two units carry cross members and plywood as a jobsite table, and flip-out support pegs hold sheet goods upright for vertical cuts.
It folds flat through a fast-open mechanism and has an easy-carry handle, although at a published 23.04 lb it is the heaviest single unit here. Note the pack format: this listing is for one sawhorse, so a working pair means buying two. It sits in the premium tier, for shops that cut heavy stock often.
Specs
– Sold as: Single sawhorse
– Load capacity: 1,300 lb each; 2,600 lb per pair
– Material: 100 percent high-grade steel, powder-coated and zinc-plated
– Design: Folding, fast-open legs
– Height adjustment: Yes, telescopic legs, about 25 to 32 in working height
– Weight: 23.04 lb
– Extras: Adjustable support arms for 2×4 and 4×4 lumber, material support pegs, pivoting feet, carry handle
Bora Portamate Speedhorse Sawhorse Pair (PM-4500T)
The Speedhorse pair is built around setup speed. A lever quick-release under the top lets the legs drop and lock in seconds; Bora publishes a 1.6 second deployment time. Capacity is the highest in this roundup: 1,800 lb per sawhorse and 3,600 lb per pair. The metal top is pre-drilled so a sacrificial 2×4 can be screwed down to protect it, and slots at each end accept 2×4 cross members that link the pair into a table base.
The trade-offs are a fixed 30 in working height with no leg adjustment, and a published weight of 17.19 lb per sawhorse, so the pair is a two-handed carry. This premium-tier pair suits contractors and woodworkers who set up and pack down repeatedly and want headroom for beams and stacked sheet goods.
Specs
– Sold as: Pair (two sawhorses)
– Load capacity: 1,800 lb each; 3,600 lb per pair
– Material: Steel, metal top
– Design: Folding, lever quick-release legs
– Height adjustment: No, fixed 30 in working height
– Weight: 17.19 lb each
– Extras: Pre-drilled top for a sacrificial 2×4, end slots for 2×4 cross members
ToughBuilt C550-2 Sawhorse and Jobsite Table, 2-Pack (TB-C550-2)
The C550-2 is the mid-range steel pair in the ToughBuilt line. Each sawhorse is rated at 1,100 lb, for a combined 2,200 lb per pair, and the frame is 100 percent high-grade steel with the same powder-coated and zinc-plated finish as the C700. Adjustable 2×4 support arms define it: drop lumber into the arms on both units, lay a sheet across, and the pair becomes a flat jobsite table for assembly and layout work. Side support pegs hold material upright.
Legs fold in through a fast-open mechanism, and a 41.5 in easy-carry handle runs along the top. ToughBuilt does not publish a height adjustment range or an item weight for this pack in the listing data, so both are marked not stated below; the legs are fixed rather than the telescopic design of the C700. For buyers who want steel construction and table conversion below the premium tier, this pair is the middle path.
Specs
– Sold as: Pair (two sawhorses)
– Load capacity: 1,100 lb each; 2,200 lb per pair
– Material: 100 percent high-grade steel, powder-coated and zinc-plated
– Design: Folding, fast-open legs
– Height adjustment: Not stated
– Weight: Not stated
– Extras: Adjustable 2×4 support arms, material support pegs, 41.5 in carry handle
WORX WX065 Clamping Sawhorses with Bar Clamps, Pair
The WX065 pair takes a different approach: instead of bare support, it adds clamping. Two detachable bar clamps ride on the sawhorses and grip workpieces up to 18 in wide, horizontally or vertically, with a published clamping force of 300 lb, so boards stay put during cutting and glue-ups. The pair is rated at 1,000 lb combined. Construction is molded ABS with steel components, and a built-in shelf plus cord hooks keep small tools and leads off the ground.
Working height is a fixed 32 in, and the pair folds flat to about 2.5 in thick for wall or vehicle storage. The Amazon listing puts the item weight at 17 lb for the set, and WORX publishes a 3-year warranty. This mid-range pair suits DIY woodworkers whose work is mostly boards, doors and trim rather than heavy beams, and who value integrated clamps over raw capacity.
Specs
– Sold as: Pair (two sawhorses) with two bar clamps
– Load capacity: 1,000 lb per pair
– Material: ABS and steel
– Design: Folding, folds flat to about 2.5 in thick
– Height adjustment: No, fixed 32 in working height
– Weight: 17 lb (pair, per listing)
– Extras: Two detachable bar clamps, 18 in clamp capacity, 300 lb clamping force, built-in shelf and cord hooks
Amazon Basics Rectangular Folding Sawhorse, Set of 2 (AMZ1719)
The Amazon Basics set is the budget pick, a simple folding pair rated at 900 lb across both sawhorses. The frame is powder-coated steel, and the set arrives fully assembled: locking braces hold the legs open, non-slip feet keep it planted, and fold-out stoppers double as a light storage shelf. Each sawhorse carries four top hooks and two bottom hooks for hanging material or wrapping cords.
There is no height adjustment, and the working height is about 29.5 in. The listing item weight is 4.86 lb, making this by far the easiest set here to carry and hang on a wall. Capacity is the limit to respect: this pair is meant for sheet goods, doors and household projects, not stacked lumber or engine work. For occasional use in a small garage, it covers the basics at the budget tier.
Specs
– Sold as: Set of 2
– Load capacity: 900 lb per pair
– Material: Powder-coated steel
– Design: Folding, folds flat, fully assembled
– Height adjustment: No, fixed height, about 29.5 in
– Weight: 4.86 lb (listing item weight)
– Extras: Locking braces, non-slip feet, fold-out stoppers, six hooks per sawhorse
How to choose
Begin with the capacity basis. A rating quoted per sawhorse doubles when two units share a load evenly, while a per-pair rating is the whole figure, so a 1,300 lb single and a 1,000 lb pair are further apart than the numbers suggest. Match the rating to the heaviest realistic load, including the workpiece and your downward force while cutting, and keep a margin rather than working at the limit.
Frame material decides how a sawhorse ages. Steel frames handle site abuse and support the highest loads, at the cost of carry weight. Molded designs trade capacity for low weight and add features such as clamp tracks and shelves. Height adjustment matters on uneven ground and for matching a table saw or bench height; telescopic legs and pivoting feet level a top that fixed legs leave rocking. Finally, weigh the extras: 2×4 arms and pre-drilled tops turn a pair into a table, built-in clamps secure boards, and folded thickness decides whether the set lives in a vehicle or on a wall.
Who should skip
Skip folding sawhorses altogether if the work is a permanent bench setup with vises and daily assembly; a fixed or portable workbench with a solid top serves that role better, and this site covers those separately. Skip the high-capacity steel models if the jobs are light and rare, since a budget folding pair handles painting, door support and occasional sheet cutting without the carry weight. And skip any model whose pair rating sits below the loads on the project list, such as stone slabs or vehicle parts; no folding sawhorse here substitutes for a rated engine stand or a masonry trestle setup.
FAQ
How much weight can a pair of sawhorses hold?
It depends on the model and on how the maker states the rating. Pair ratings in this group run from 900 lb for the Amazon Basics set to 3,600 lb for the Bora Speedhorse pair. Check whether a figure is per sawhorse or per pair, and spread loads evenly across both units.
Are sawhorses sold singly or in pairs?
Both formats exist, and the listing title does not always make it obvious. Four of the five picks here are pairs or sets of two, while the ToughBuilt C700 listing is a single sawhorse. Confirm the unit count before ordering.
Can two sawhorses replace a workbench?
For cutting, assembly and finishing, largely yes. Models with 2×4 support arms or a pre-drilled top accept lumber cross members and a plywood sheet, forming a flat table that folds away afterward. A sawhorse table will not match a fixed bench for vise work or heavy pounding.
Do adjustable-height sawhorses matter?
They matter on uneven ground and when the top must match another surface, such as a table saw outfeed or an existing bench. Telescopic legs also let users set a comfortable working height. On a flat shop floor, a fixed-leg model gives up little.
Final verdict
The ToughBuilt C700 is the pick for heavy, frequent work: the highest single-unit rating here, telescopic legs with pivoting feet, and arms that build a table from 2×4 or 4×4 stock. The Bora Speedhorse pair deploys fastest and carries the most per pair. The ToughBuilt C550-2 splits the difference with steel construction and table arms in the mid-range tier. Choose the WORX WX065 when clamping boards matters more than load, and the Amazon Basics set when the work is light and storage space is tight.
Related guides
Read next
More from Amazon
Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.
A free business account with business pricing and bulk-buying tools for work, shop or home office.
Create a business accountFree shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.
Start a Prime free trialAudiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.
Try Audible freeAd-free music streaming. Eligible new subscribers can start with a free trial.
Try Music Unlimited freeAs an Amazon Associate we earn from qualifying purchases.




Write Your Review
No reviews yet. Be the first to share your experience!