Updated Nov 20, 2026· 8 min read

Key takeaways

  • Compare the best bench power supplies for electronics benches, from single 30V 10A units to dual-channel and programmable models, with specs and picks.

As an Amazon Associate I earn from qualifying purchases. This post may contain affiliate links at no extra cost to you.

⭐ Key Takeaways
Quick answer: Our top pick is Jesverty SPS-3010, with WANPTEK DPS3010U as a strong alternative.

A bench power supply turns wall power into clean, adjustable DC that you can dial to the exact voltage a circuit needs, with a current limit that keeps a wiring slip from cooking a board. On an electronics bench in a workshop, it powers prototype circuits, runs motors and LED strips during fitting, feeds radios and amplifiers on the repair bench, and stands in for a battery while you trace faults.

This roundup compares five standalone DC bench supplies drawn from published maker specifications: a budget single-channel unit, an encoder model with a quick-charge USB port, a dual-channel unit, a 1,200 W high-power model, and a programmable linear supply. No soldering gear, chargers or vehicle battery testers are mixed in.

As an Amazon Associate, we earn from qualifying purchases.

Quick answer

For most electronics benches, the Jesverty SPS-3010 covers the core job: one 30 V, 10 A channel, a four-digit readout and plain coarse and fine knobs. The WANPTEK DPS3010U adds encoder control and a quick-charge USB port. Choose the NICE-POWER dual unit for two channels, the R-SPS6020 for 1,200 W jobs, and the programmable KORAD for precision work.

The picks

Jesverty SPS-3010

Jesverty SPS-3010 DC Power Supply

Jesverty SPS-3010 DC Power Supply

Check price on Amazon

The SPS-3010 is the straightforward budget pick for a first dedicated bench supply. Its single channel delivers 0 to 30 V and 0 to 10 A, and the four-digit LED readout shows voltage, current and power with adjustable brightness for legibility under workshop lighting. Separate coarse and fine knobs make it easy to land on a setting without overshooting, and a front-panel 5 V, 2 A USB port runs a phone or USB-powered gadget beside the main output. Overcurrent protection, a cooling fan and a replaceable fuse round out a compact 2.4 lb metal case.

Specs
– Model: SPS-3010
– Channels: 1
– Output range: 0-30 V DC, 0-10 A, up to 300 W
– Display: 4-digit LED, voltage, current and power readout
– Display resolution: 0.01 V / 0.001 A
– Adjustment: coarse and fine knobs
– Extra output: USB Type-A, 5 V / 2 A
– Protection: overcurrent protection, cooling fan, replaceable fuse
– Input: AC 115 V / 230 V switchable, 50/60 Hz
– Dimensions: 3.35 x 6.1 x 7.09 in
– Weight: 2.4 lb

WANPTEK DPS3010U

WANPTEK DPS3010U DC Power Supply

WANPTEK DPS3010U DC Power Supply

Check price on Amazon

The DPS3010U swaps plain knobs for encoder controls: press a knob to select the digit, then turn to change its value, which suits careful work near a current limit. The three-window, four-digit display shows voltage, current and power at once, with a published accuracy of 0.5 percent plus or minus 3 digits. An auxiliary USB quick-charge output rated at 18 W covers USB-A and Type-C devices at 5 V and up to 3.6 A. The maker manual lists constant-voltage ripple at or below 20 mVrms, current limiting protection, and a short-circuit alarm that stops the output and recovers on its own. This is the mid-range pick for repair benches that set precise limits all day.

Specs
– Model: DPS3010U
– Channels: 1
– Output range: 0-30 V DC, 0-10 A, 300 W
– Display: 4-digit, three-window (voltage, current, power)
– Display resolution: 0.01 V / 0.001 A
– Adjustment: encoder knobs with digit selection, coarse and fine
– Extra output: USB quick charge, 18 W (USB-A and Type-C, 5 V / 3.6 A)
– Protection: overcurrent protection, current limiting, short-circuit alarm with self-recovery
– Input: AC 115 V / 230 V switchable
– Dimensions: 225 x 90 x 145 mm (maker manual)
– Weight: 1.8 kg (maker manual)

NICE-POWER SPS3010-2KD

NICE-POWER SPS3010-2KD Dual DC Power Supply

NICE-POWER SPS3010-2KD Dual DC Power Supply

Check price on Amazon

This dual-channel unit carries two independent supplies in one case, each rated at 0 to 30 V and 0 to 10 A, so one channel can power a control board while the other runs a motor or a second circuit at a different voltage. One-touch linking reconfigures the pair: series mode gives a single 0 to 60 V, 10 A output, and parallel mode gives 0 to 30 V at up to 20 A. Each channel keeps its own voltage, current and power readouts, and a 5 V, 2 A USB port sits on the front panel for small devices. For benches that power two rails at once, it replaces two separate boxes.

Specs
– Model: SPS3010-2KD
– Channels: 2, independent
– Output range per channel: 0-30 V DC, 0-10 A, 300 W
– Series mode: 0-60 V, 0-10 A
– Parallel mode: 0-30 V, 0-20 A
– Display: per-channel readouts for voltage, current and power
– Display resolution: 0.01 V / 0.001 A
– Extra output: USB, 5 V / 2 A
– Input: AC 110 V / 220 V
– Weight: 6.05 lb

NICE-POWER R-SPS6020

NICE-POWER R-SPS6020 DC Power Supply

NICE-POWER R-SPS6020 DC Power Supply

Check price on Amazon

The R-SPS6020 is the high-power pick, with a single channel rated at 0 to 60 V and 0 to 20 A for a full 1,200 W. That range covers jobs a 300 W unit cannot touch: larger motors, car audio amplifiers on the bench, LED arrays, heating elements and electroplating work. Settings go in through an encoder knob with digit selection, a four-digit LED shows voltage, current and power, and a separate output switch lets you set values before anything reaches the load. An intelligent cooling fan handles sustained high output. Plan the wiring on long heavy runs, because the listing notes the front panel output suits currents up to 5 A, with the full range served by the unit’s heavy-duty connections.

Specs
– Model: R-SPS6020
– Channels: 1
– Output range: 0-60 V DC, 0-20 A, 1,200 W
– Display: 4-digit LED, voltage, current and power readout
– Display resolution: 0.01 V / 0.001 A
– Adjustment: encoder knob with digit selection
– Output control: separate output on/off switch
– Cooling: intelligent cooling fan
– Input: AC 115 V, 60 Hz (US listing)
– Weight: 6.6 lb

KORAD KA3005P

KORAD KA3005P Programmable DC Power Supply

KORAD KA3005P Programmable DC Power Supply

Check price on Amazon

The KA3005P is the premium pick, and the only linear design in this roundup. A linear supply trades light weight for low output noise, which matters on audio circuits, radio work and sensitive analog stages. Output runs 0 to 30 V and 0 to 5 A, settable in 10 mV and 1 mA steps, and the unit is programmable: USB and RS232 ports link it to a computer with the included software, and five memory slots store settings you use often. Overvoltage and overcurrent protection plus a panel lock suit shared benches. The trade-offs are published and plain: 5 A is the ceiling, and the transformer inside brings the weight to about 4.8 kg.

Specs
– Model: KA3005P
– Type: linear, programmable
– Channels: 1
– Output range: 0-30 V DC, 0-5 A, 150 W
– Setting resolution: 0.01 V / 0.001 A
– Computer control: USB and RS232, software included
– Memory: 5 preset slots
– Protection: overvoltage and overcurrent protection, panel lock
– Weight: about 4.8 kg

How to choose

Match the headline numbers to the work first. A 30 V, 10 A single channel covers the large majority of electronics bench jobs, from microcontroller boards to small motors. Step up to 60 V or 20 A only when your loads genuinely call for it, and remember that the watt rating is the real ceiling: a supply reaches its watt limit before both dials reach their maximums together.

Decide on channels next. One channel is simpler and lighter. Two channels earn their space when you power split rails for an amplifier or op-amp circuit, or when a board and its load need different voltages at once. Series and parallel linking, as on the NICE-POWER dual unit, stretches one box further when an occasional job needs more voltage or more current than a single channel gives.

Then look at control and readout. Four-digit displays with 0.01 V and 0.001 A resolution let you set a current limit precisely instead of guessing near it. Coarse and fine knobs feel direct; encoder knobs with digit selection feel exact. An output switch is worth having: dial in values with the load disconnected, then apply power when the settings are right.

Finally, check protection and setup details. Overcurrent and overvoltage protection guard the circuit on the bench, and a current limit you trust is the main reason to own one of these at all. Confirm the input selector matches your mains before the first switch-on, since several of these units ship switchable between 115 V and 230 V. If your work is audio or radio, weigh the low noise of a linear design against the light weight of the switching units.

Who should skip

Skip this category if you only ever need one fixed voltage, such as 5 V for a router or 12 V for a strip of LEDs; a fixed-output adapter does that job with no settings to manage. Skip it if you need AC output, three or more independent rails, or full galvanic isolation between channels, since those needs point to larger laboratory systems. And if the real job is charging tool or vehicle batteries unattended, a charger built for that chemistry is the right tool; a bench supply belongs in attended work where you watch the readings.

FAQ

What size bench power supply do most electronics projects need?

A single channel rated at 30 V and 10 A covers most hobby and repair work, including development boards, small motors, fans, LED lighting and car accessories. Move to a 60 V or 20 A model only when a specific load demands it, and pick two channels when split rails or two voltages at once are routine.

What is the difference between constant voltage and constant current mode?

In constant voltage mode the supply holds the voltage you set and lets current follow the load. When the load tries to draw more than your current limit, the supply switches to constant current mode and holds the current instead, letting voltage fall. The front panel indicators show which mode is active, and the current limit is what protects a faulty board.

Is a linear or a switching bench power supply better for audio and radio work?

A linear supply such as the KORAD KA3005P publishes low output noise, which suits audio stages, radio circuits and sensitive analog measurements. Switching supplies are far lighter and smaller for the same output, and their noise rarely matters for digital boards, motors or lighting. Choose by the circuits you power most, and by how much bench weight you accept.

Can a bench power supply charge a battery?

It can, with care: set the voltage to the battery’s full-charge level, set a modest current limit, and stay with the battery while it charges, since a bench supply has no charge termination of its own. For unattended or regular charging, use a charger built for that battery chemistry instead.

Final verdict

For a single all-round bench supply, the Jesverty SPS-3010 is the pick to beat, with the WANPTEK DPS3010U close behind for anyone who prefers encoder control and a quick-charge port. The NICE-POWER SPS3010-2KD is the right answer when two channels are the point, the R-SPS6020 owns the high-power jobs at 1,200 W, and the KORAD KA3005P remains the precision choice for quiet, programmable power. Match the channel count and watt ceiling to your bench, and any of the five will serve for years.

L
Loa Power Tools Editorial Team
We compare specs, warranty terms, long-term owner feedback and street pricing before anything earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
Best Bench Power Supplies for Electronics WorkbenchesCheck price on Amazon

Related guides

Browse all Product Guides guides →

More from Amazon

Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

Amazon Business

A free business account with business pricing and bulk-buying tools for work, shop or home office.

Create a business account
Amazon Prime

Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

Start a Prime free trial
Audible

Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

Try Audible free
Amazon Music Unlimited

Ad-free music streaming. Eligible new subscribers can start with a free trial.

Try Music Unlimited free

As an Amazon Associate we earn from qualifying purchases.