Key takeaways
- Compare the best pressure washer pump savers and winterizing kits from STA-BIL, Simpson, Karcher and more, with freeze ratings, sizes and fit notes.
What's inside
As an Amazon Associate I earn from qualifying purchases. This post may contain affiliate links at no extra cost to you.
Home › Product Guides › Best Pressure Washer Pump Savers and Winterizing Kits
- Top Pick: Conclusion
- Runner-up: Conclusion
- Also consider: Conclusion
The best pressure washer pump saver for most owners is a small aerosol or squeeze bottle of antifreeze and lubricant that connects to the pump inlet, displaces the water left inside, and coats the pistons and seals before storage. The STA-BIL Pump Protector and the Simpson Pump Guard are the easiest picks to find and use, the Kärcher Pump Guard suits owners who want a larger pour-in bottle, the Powercare Pump Protector covers owners of Ryobi and Homelite machines, and the Briggs & Stratton Pump Saver is the treatment Briggs & Stratton names in its own storage instructions.
A pump saver is cheap insurance against the most common way pressure washers die: water left in the pump over winter. When that water freezes it expands, and the expansion can crack the pump head, split seals, and pit the valves. Standing water also leaves mineral deposits and corrosion that make a pump hard to start the next season. Every product here does the same basic job — push the water out, leave antifreeze and lubricant behind — so the real differences are bottle size, how the product connects, the freeze protection the maker publishes, and which machines the formula is aimed at.
As an Amazon Associate, we earn from qualifying purchases.
Table of Contents
- How a Pump Saver Works
- STA-BIL Pump Protector
- Simpson Pump Guard 80273
- Kärcher Pump Guard
- Powercare Pump Protector AP31093
- Briggs & Stratton Pump Saver
- How to Choose a Pump Saver or Winterizing Kit
- Who Should Skip a Pump Saver
- FAQ
- Conclusion
- Product and ASIN Reference
How a Pump Saver Works
Every pump saver here follows the same routine published by the manufacturers. The washer is switched off and disconnected from the water supply, the pump saver connects to the garden hose inlet on the pump, and the product is dispensed until it begins to exit the pump outlet. On a gas machine the recoil starter is usually pulled a few times with the ignition off to move the fluid through; on an electric machine the makers direct a short trigger or motor bump per the label. Once fluid exits the outlet, the pump internals are coated, and the machine can go into storage.
The formulas combine two jobs. The antifreeze component protects the water passages against freeze damage, and the lubricant component keeps pistons, plungers, and seals from drying out and sticking during storage. Most makers also direct a second treatment at the first startup of the new season, because a coated pump primes more easily than a dry, corroded one.
STA-BIL Pump Protector
The STA-BIL Pump Protector is the storage specialist’s entry in this category, from Gold Eagle, the company behind STA-BIL fuel stabilizer. It comes as a 4-ounce aerosol can with an attached hose, so there is nothing to pour and nothing to measure: the hose connects to the pump inlet, the cap lifts, and the button dispenses a white protective foam through the pump. The maker positions it for winterizing before storage and for treating the pump again at startup the following season.
Because the format is a self-contained aerosol, this is the simplest pick for a first-time owner who wants the job done in a couple of minutes with no funnel and no mixing. The trade-off is volume: a single 4-ounce can is sized for one machine, so owners winterizing several washers will work through several cans. It sits in the budget tier.
Specs:
- Brand: STA-BIL (Gold Eagle Co.)
- Model: 22007
- Size: 4 oz aerosol can with dispensing hose
- Function: antifreeze and lubricant formula for storage
- Application: connects to the pump inlet; dispense until fluid exits the pump outlet
- Use timing: before storage and again at seasonal startup
- Compatibility: gas and electric pressure washers
- Shelf life: up to 2 years after opening, per the maker
Simpson Pump Guard 80273
Simpson builds pressure washers, so its Pump Guard is the factory treatment for the brand’s own machines, and it is published for gas and electric washers generally. The current version is model 80273, which replaces the earlier Simpson Pump Guard 80130, in a 4-fluid-ounce aerosol can. Simpson publishes freeze protection as low as minus 25 degrees Fahrenheit, which matches the coldest ratings here and makes it a sensible pick for unheated garages and sheds in cold climates.
The application mirrors the other aerosols here: with the engine or motor off, the product is injected into the hose input until it works through the pump, lubricating the pistons and seals on the way. Simpson frames Pump Guard as a storage product rather than an after-every-use treatment, so one can per machine per season is the expected routine. It sits in the budget tier.
Specs:
- Brand: Simpson Cleaning
- Model: 80273 (replaces Pump Guard 80130)
- Size: 4 fl oz aerosol can
- Freeze protection: as low as minus 25 degrees Fahrenheit, per the maker
- Function: antifreeze and winterizer; lubricates pistons and seals
- Application: inject into the hose input with the machine switched off
- Compatibility: gas and electric pressure washers
- Item weight: 4 ounces
Kärcher Pump Guard
The Kärcher Pump Guard is the large-format option here: a 16-fluid-ounce pour-in bottle rather than a single-use aerosol. Kärcher publishes it as an antifreeze protection and lubrication formula for its electric and gas pressure washers, and the bottle carries model number 9.558-998.0.
Sixteen ounces covers repeated treatments, which suits owners who treat the pump after the last use of the season and again at spring startup, or who keep more than one washer. The pour-in format asks a little more care than a pressurized aerosol — the bottle feeds through the inlet fitting per the label directions — but there is no propellant and no partial-can waste. It sits in the mid-range tier on a per-bottle basis while covering the most treatments of any pick here.
Specs:
- Brand: Kärcher
- Model: 9.558-998.0
- Size: 16 fl oz bottle
- Function: antifreeze protection and lubrication formula
- Application: pour-in treatment through the pump inlet, per label directions
- Compatibility: Kärcher electric and gas pressure washers; standard garden hose inlet fittings
- Format: liquid bottle, no aerosol propellant
- Treatments: multiple applications per bottle
Powercare Pump Protector AP31093
Powercare is the service and accessory brand behind Ryobi and Homelite outdoor equipment, and its Pump Protector is the treatment sold for those machines. It comes in a 12-ounce bottle under part number AP31093, between the single-use aerosols and the Kärcher bottle in size. The published description focuses on the two storage threats that matter most for homeowner machines: mineral buildup from hard water left sitting in the pump, and corrosion on internal components during the off-season.
For owners of Ryobi and Homelite washers, this is the on-brand pick that matches the accessory line their machine’s documentation points to, and the 12-ounce size also works as a shared bottle for a household with two machines. It sits in the budget-to-mid-range tier. Buyers should note the published specification set is thinner than the Simpson or STA-BIL listings, so the label on the bottle is the authority for freeze rating and directions.
Specs:
- Brand: Powercare
- Model: AP31093
- Size: 12 oz bottle
- Function: pump protector against mineral buildup and corrosion during storage
- Application: treat the pump through the inlet before storage, per label directions
- Compatibility: published for Ryobi and Homelite pressure washers; standard inlet fittings
- Format: liquid bottle
- Treatments: multiple applications per bottle
Briggs & Stratton Pump Saver
Briggs & Stratton writes PumpSaver into the storage section of its own pressure washer manuals, which makes this the factory-specified treatment for the large installed base of Briggs-powered machines. The manuals direct owners to treat the pump with PumpSaver — model 6039 in the parts listings — to protect against damage from mineral deposits and freezing, and note that it also lubricates pistons and seals. The same instructions call for a treatment before storage and again before startup the following season.
The published directions are simple: make sure the washer is off and disconnected from the water supply, attach the treatment at the pump inlet, and follow the container’s instructions until the pump is treated, keeping in mind the manuals’ warning that treated fluid drips from the pump and can stain wood and concrete. Briggs & Stratton also publishes the product as safe for electric models, not just its gas machines. It sits in the budget tier, and for owners following a Briggs manual step by step, it is the exact product those steps name.
Specs:
- Brand: Briggs & Stratton
- Model: PumpSaver 6039, per Briggs & Stratton parts listings
- Function: antifreeze and lubricant treatment for storage
- Protection: guards against mineral deposits and freeze damage, per the maker
- Lubrication: pistons and seals
- Application: attach at the pump inlet with the machine off and the water supply disconnected, per container directions
- Use timing: before storage and before startup the next season
- Compatibility: gas pressure washers and electric models, per the maker
How to Choose a Pump Saver or Winterizing Kit
Start with the freeze rating. If the washer will sit in an unheated space where temperatures fall well below freezing, choose a product whose maker publishes a protection temperature that covers your climate; the Simpson Pump Guard publishes the coldest figure here at minus 25 degrees Fahrenheit. If the machine is stored in an attached garage that rarely dips below freezing, any pick here covers the risk, and format matters more than rating.
Next, match the format to how many machines you treat. The 4-ounce aerosols from STA-BIL and Simpson are single-machine, no-measure options that make the job hard to get wrong. The 12-ounce Powercare and 16-ounce Kärcher bottles cover repeated treatments and multiple machines, which suits owners who winterize more than one washer every fall.
Brand fit is the third factor. Pump savers are broadly interchangeable because they all work through a standard garden hose inlet, but owners who follow their manual literally may prefer the treatment the manual names: PumpSaver for Briggs & Stratton, Pump Guard for Simpson and Kärcher, and the Powercare protector for Ryobi and Homelite. Finally, remember what a pump saver does not do: it protects the pump only. Gas machines still need the fuel system treated or drained, and hoses, guns, and wands should be drained and stored dry.
Who Should Skip a Pump Saver
Owners who store the washer in a heated space that never approaches freezing, and who drain the pump fully after every use, get the least from these products, though the lubricant benefit for seals still applies over long storage. Owners in warm climates who run the machine year-round have no winterizing window at all. Anyone whose pump is already cracked from a past freeze should also skip the treatment aisle: pump saver is preventive, and no antifreeze formula repairs a split pump head or a failed seal. Those machines need parts or a replacement pump first, and a treatment only after the repair.
FAQ
Do I need a pump saver if I drain the pump?
Draining removes most of the water, but a drained pump still holds residual water in the valves and passages, and draining does nothing to lubricate the pistons and seals. Pump saver covers the two risks draining leaves behind: a hard freeze on the residual water and dry, sticking seals at the next startup.
Can I use RV antifreeze instead of a pump saver?
Briggs & Stratton manuals publish exactly that fallback: if PumpSaver is not available, connect a short section of garden hose to the inlet, pour in RV antifreeze without alcohol, and pull the recoil starter twice. It protects against freezing, but it adds no lubricant, so seals get no conditioning benefit over the storage period.
When should I apply a pump saver?
The makers direct two applications: once before the machine goes into storage, and once at the first startup of the new season. The storage application displaces water and coats the internals; the startup application re-lubricates the pistons and seals before the pump goes back to work.
Does a pump saver work on both gas and electric pressure washers?
Yes. Every product here is published for gas and electric machines, because both types use similar pumps with the same garden hose inlet and the same vulnerability to freeze damage and mineral deposits. The only difference is how the fluid is moved through: gas machines use recoil pulls with the ignition off, while electric machines follow the label’s trigger or motor directions.
Conclusion
A pump saver is the smallest purchase in pressure washer ownership and the one that prevents the most common storage failure. Pick the STA-BIL Pump Protector for the simplest single-can routine, the Simpson Pump Guard for a published minus 25 degree rating from the pump maker itself, the Kärcher Pump Guard for a multi-treatment bottle, the Powercare Pump Protector for Ryobi and Homelite machines, and the Briggs & Stratton Pump Saver for the treatment your Briggs manual names. Treat the pump before storage and again at startup, and the washer that went into the shed in fall is the washer that starts in spring.
Related guides
Read next
More from Amazon
Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.
A free business account with business pricing and bulk-buying tools for work, shop or home office.
Create a business accountFree shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.
Start a Prime free trialAudiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.
Try Audible freeAd-free music streaming. Eligible new subscribers can start with a free trial.
Try Music Unlimited freeAs an Amazon Associate we earn from qualifying purchases.





Write Your Review
No reviews yet. Be the first to share your experience!