Key takeaways
- Compare the best masonry drill bits for hammer drills and rotary hammers, from straight-shank carbide sets to SDS-Plus kits, with sizes, shanks and tips.
As an Amazon Associate I earn from qualifying purchases. This post may contain affiliate links at no extra cost to you.
Home › Product Guides › Best Masonry Drill Bits: 5 Carbide Sets for Every Drill
Drilling into concrete, brick, or block asks more of a bit than wood or metal work does. The cutting edge has to survive abrasive aggregate and repeated hammer blows, which is why every set here uses carbide tips brazed onto steel bodies, with flutes shaped to pull dust out of the hole while the tool pounds. The five sets cover the two shank systems that dominate this work: straight shanks for ordinary three-jaw chucks, and SDS-Plus shanks that lock into rotary hammers.
The picks are grouped by the tool they serve rather than by brand: two sets for hammer drills, one rotary-only set for plain drills, one SDS-Plus kit for rotary hammers, and one hex-shank kit for impact drivers. Tile and glass bits sit outside this guide on purpose, since spear-point and diamond tile bits are a separate family. Every detail below comes from published maker and listing specifications, and each set is placed in a budget, mid-range, or premium tier.
As an Amazon Associate, we earn from qualifying purchases.
Quick answer
For most hammer drills, the DEWALT DW5207 covers the common anchor sizes with a no-slip three-flat shank. Rotary-only drilling in brick and block is served by the 14-piece Bosch BM5000, while SDS-Plus rotary hammer owners should pick the Bosch Bulldog Tough set. The Milwaukee SHOCKWAVE kit suits impact drivers.
The picks
DEWALT DW5207 7-Piece Premium Percussion Masonry Drill Bit Set
This mid-range set is the default choice for a hammer drill with a keyed or keyless chuck. Each bit carries a rock carbide tip in a two-cutter layout with a taper point, and the four-flute spiral moves dust out of the hole so the tip keeps cutting instead of riding on packed debris. Three ground flats on the shank give the chuck jaws a positive grip and keep the bit from spinning under hammer load.
The size run leans on the diameters anchor work uses most. DEWALT includes two 1/4 inch bits, in 4 inch and 6 inch lengths, because that diameter wears fastest in screw-anchor work. A 3/16 inch bit handles smaller anchors, while 5/16, 3/8, and 1/2 inch bits cover sleeve and lag shield work. The listing states a one-year full warranty.
Specs
- Pieces: 7
- Shank: 3-flat straight shank
- Tip: Rock carbide, 2-cutter, taper point
- Flute: 4-flute spiral
- Point angle: 135 degrees
- Sizes: 3/16 in. x 3 in.; (2) 1/4 in. x 4 in.; 1/4 in. x 6 in.; 5/16 in. x 6 in.; 3/8 in. x 6 in.; 1/2 in. x 6 in.
- Item weight: 8.8 oz
- Warranty: 1-year full warranty, per the listing
Bosch BM5000 14-Piece Fast Spiral Rotary Masonry Bit Set
With 14 pieces, this budget-tier Bosch set carries the widest size spread in the group, including triples of the 1/8, 3/16, and 1/4 inch diameters that small anchor work consumes. Carbide tips sit on straight shanks with a double-flute fast spiral profile, so the bits fit any ordinary drill chuck and clear dust well in brick, block, and mortar joints.
One limit defines this set, and Bosch states it plainly in the manual: these bits are for rotary drilling only, with no hammer or percussion mode. That makes the BM5000 the right pick for a plain drill working in softer masonry, and the wrong pick for poured concrete with the hammer function engaged. Buyers who respect that boundary get a broad size library for light masonry tasks.
Specs
- Pieces: 14
- Shank: Straight shank
- Tip: Carbide
- Flute: Double (2) flute, fast spiral
- Point angle: 120 degrees
- Sizes: (3) 1/8 in.; (2) 5/32 in.; (3) 3/16 in.; (3) 1/4 in.; 5/16 in.; 3/8 in.; 1/2 in.
- Drilling mode: Rotary only, per the maker manual
Bosch HCBG700 7-Piece Blue Granite Turbo Hammer Drill Masonry Bit Set
The Blue Granite Turbo line is Bosch’s premium straight-shank offering for hammer drills, and this seven-piece set is its compact form. The carbide tips are diamond ground, and the flutes are milled into a U shape for faster dust removal under percussion. The listing rates the bits for stone, concrete, and masonry.
Sizes run from 1/8 inch up to 3/8 inch, with doubles of the 5/32 and 3/16 inch diameters. Working lengths sit at 4 inches on most pieces, suiting anchor holes in block and brick veneer. Hammer drill owners wanting a step up in tip grinding quality, without moving to an SDS-Plus tool, will find this set aimed at them, though anyone needing a 1/2 inch hole should look at the DEWALT set instead.
Specs
- Pieces: 7
- Shank: Straight shank
- Tip: Diamond-ground carbide, Diamond Point style
- Flute: Milled U-flute, spiral
- Point angle: 135 degrees
- Sizes: (1) 1/8 in. x 2 in. x 3 in.; (2) 5/32 in. x 3 in. x 6 in.; (2) 3/16 in. x 4 in. x 6 in.; (1) 1/4 in. x 4 in. x 6 in.; (1) 3/8 in. x 4 in. x 6 in.
- Surfaces: Stone, concrete, masonry
- Item weight: 0.84 lb
Bosch HC4ST006 6-Piece SDS-Plus Bulldog Tough Rotary Hammer Bit Set
Rotary hammer owners need a shank that locks into the SDS-Plus chuck, and this premium Bosch set is the group’s entry for that system. The Bulldog Tough bits pair carbide tips with a four-flute spiral, a geometry that spreads hammer energy across more cutting edges and clears dust from deep holes in concrete. Taper point and a 120 degree cutting angle complete the published field set.
Six pieces keep the set focused on common anchor diameters, and the SDS-Plus shank means no chuck slip and no re-tightening between holes. The listing does not publish a per-size contents list in its specification fields, so the diameter line in the Specs block is marked accordingly. Buyers running SDS-Max or spline-drive hammers need a different shank family entirely.
Specs
- Pieces: 6
- Shank: SDS-Plus
- Tip: Carbide, taper point
- Flute: 4-flute spiral
- Point angle: 120 degrees
- Surface: Concrete
- Diameters: Not stated in the listing specification fields
- Item weight: 1.45 lb
Milwaukee SHOCKWAVE Impact Duty Carbide Hammer Drill Bit Kit, 7-Piece (48-20-9052)
Milwaukee builds this mid-range kit around a 1/4 inch hex shank, so the bits run in impact drivers, quick-change chucks, and hammer drills alike. The carbide tips are precision ground for clean entry with less walking, and the wide flute design clears dust quickly in concrete, brick, and block. Milwaukee rates the line at up to five times the service life in concrete and up to two times the drilling speed of standard masonry bits, figures stated here as maker claims.
The seven pieces concentrate on the smaller anchor range: a 5/32 inch bit, pairs of 3/16 and 1/4 inch bits, and single 5/16 and 3/8 inch bits, per the maker catalog. That suits anyone carrying one driver for both fastening and anchor holes, though the 3/8 inch ceiling means larger sleeve anchors need a straight-shank or SDS-Plus set instead.
Specs
- Pieces: 7
- Shank: 1/4 in. hex shank
- Tip: Carbide, precision ground
- Flute: Wide flute design
- Sizes, per maker catalog: 5/32 in.; (2) 3/16 in.; (2) 1/4 in.; 5/16 in.; 3/8 in.
- Materials: Concrete, brick, block
- Tool fit: Hammer drills and impact drivers
How to choose
Match the shank to the chuck first, because no adapter fixes a mismatch well. Straight and three-flat shanks clamp into the three-jaw chucks on hammer drills and plain drills. SDS-Plus shanks fit only SDS-Plus rotary hammer chucks, where they lock in and slide under hammer action. Hex shanks add impact drivers and quick-change holders to the compatible tools.
Check the drilling mode next. Hammer-rated sets like the DEWALT, Blue Granite, Bulldog Tough, and SHOCKWAVE kits are built for percussion, while the Bosch BM5000 is limited by its maker to rotary drilling only. Running a rotary-only bit under hammer blows shortens its life, so the mode line in each Specs block matters.
Then look at tip and flute geometry: two-cutter carbide tips handle plain concrete and block well, while four-flute SDS-Plus bits spread the load for harder aggregate. Finally, compare size coverage and working length. The hole depth a bit can drill is its flute length, not its overall length, and duplicates of 3/16 and 1/4 inch bits are worth having because those diameters wear first.
Who should skip
Skip this whole category if the job is tile or glass, since those materials need spear-point carbide or diamond bits from a different family. Metal, wood, and plastic drilling likewise belong to the black oxide, titanium, brad point, and spade bit families, none of which appear here.
Owners of SDS-Max or spline-drive rotary hammers should also pass, since none of these five shanks fit those chucks. Work dominated by holes above 1/2 inch, or embedments past 6 inches, calls for long individual SDS bits rather than a compact set. And with only a plain drill on hand, limit the shortlist to the rotary-only Bosch BM5000 and softer masonry like brick and block.
FAQ
Can masonry bits run in a regular drill without hammer mode?
Yes, within limits. Straight-shank carbide bits will drill brick, block, and mortar in rotary mode, and the Bosch BM5000 is built for that use. Poured concrete goes slowly without percussion, and hammer-rated sets earn their keep there. SDS-Plus bits cannot run in a regular drill, since the shank needs an SDS-Plus chuck.
What is the difference between a straight shank and an SDS-Plus shank?
A straight shank is a smooth cylinder, sometimes with three flats, that a three-jaw chuck grips by friction. An SDS-Plus shank has grooves that lock into a rotary hammer chuck, letting the bit slide as the hammer mechanism strikes it. The two systems are not interchangeable, and each set above is built for one of them.
Which sizes cover most wall anchors?
Most home anchor work falls between 3/16 inch and 1/2 inch. Plastic plug anchors and Tapcon-style screws lean on 3/16 and 1/4 inch holes, while sleeve anchors and lag shields use 5/16, 3/8, and 1/2 inch. Every set in this guide covers that band, and several duplicate the two smallest sizes.
Can these sets drill tile or glass?
No. Carbide masonry bits are ground for crushing concrete and brick under hammer action, and that action can crack glazed tile. Tile and glass call for spear-point carbide or diamond-coated bits run at low speed with water, a separate product family outside the scope of these five sets.
Final verdict
The DEWALT DW5207 is the safest single buy for hammer drill owners, with its three-flat shank, full 3/16 to 1/2 inch coverage, and doubled 1/4 inch bits. The Bosch BM5000 serves plain-drill owners as a rotary-only set, the Blue Granite Turbo set upgrades tip quality for straight-shank tools, the Bulldog Tough set covers SDS-Plus rotary hammers, and the Milwaukee SHOCKWAVE kit folds anchor drilling into an impact driver kit. Choose by chuck first, and the rest follows.
Related guides
Read next
- Best Countersink Bits: 5 Sets for Wood and Metal Work
- Best Screwdriver Sets: 5 Hand Sets for Every Workshop
- Best Router Bit Sets: 5 Picks for Woodworking Shops
- Best Socket Sets for Home Shops, Garages, and Autos
- Best Hand Planes for Woodworking, from Smoothers to Blocks
- Best Small Parts Organizers for Screws and Hardware
More from Amazon
Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.
A free business account with business pricing and bulk-buying tools for work, shop or home office.
Create a business accountFree shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.
Start a Prime free trialAudiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.
Try Audible freeAd-free music streaming. Eligible new subscribers can start with a free trial.
Try Music Unlimited freeAs an Amazon Associate we earn from qualifying purchases.
Write Your Review
No reviews yet. Be the first to share your experience!