Updated Nov 11, 2026· 16 min read

Our Top Picks

  1. Milwaukee 49-56-0500 Diamond Max Diamond Grit Hole Saw
    Check on Amazon
  2. MILWAUKEE'S 49-56-0511 1/2" Diamond One-Piece Hole Saw
    Check on Amazon

As an Amazon Associate I earn from qualifying purchases. This post may contain affiliate links at no extra cost to you.

The best tile hole saw for most DIY bathroom and kitchen jobs is a diamond set that covers the small sizes you actually need for faucet, drain and shower fixtures, plus a guide that stops the bit from skating on glazed tile. Among the sets we reviewed, the WORKEASE 18-piece kit is our best-value pick because it covers 6 to 50 mm with a double suction cup guide, and the Drilax 10-piece kit is the runner-up for people who want a tidy 1/4 to 2 inch range with a carrying case. This guide covers sets for porcelain and ceramic tile, explains wet versus dry use, and tells you how to match sizes to the holes you really have to drill.

We did not personally use these products. This guide is research-based: it uses the listing details, the manufacturers’ own descriptions and general guidance from tile-setting and drilling sources. Where a spec is not stated, we write “not listed”. We also do not make claims about how long any bit will last, because that depends on the tile, the drill, the pressure and the cooling.

Top Picks at a Glance

  • Best Value Set: WORKEASE 18-piece diamond kit, 6-50 mm, double suction cup guide, dry and wet use
  • Best for Bathroom Fixtures: Drilax 10-piece kit, 1/4 to 2 inch, guide and carrying case
  • Best Wide Size Range (metric): ZNXIMER 16-piece vacuum brazed kit, 6-65 mm
  • Best Mid-Size Kit: Tolvaxo 11-piece vacuum brazed kit, 1/4 to 2-1/2 inch
  • Best Premium Large Holes: DAYDOOR 15-piece vacuum brazed kit, 1/4 inch up to 4 inch
  • Best Budget With Storage: METOTY 15-piece set, 1/4 to 2 inch, EVA positioner and hard storage bag
  • Best Simple Starter Jig Set: ASNOMY 10-piece set, 1/4 to 2 inch, EVA mold guide jig

Quick Comparison Table

Product Best for Key specs (from listing) Watch for Price tier
WORKEASE 18-piece Everyday tile holes, many sizes 18 pieces, 6-50 mm, dry or wet, double suction cup guide Largest bit is 50 mm (about 2 inches) Budget
Drilax 10-piece Faucet, drain and showerhead holes 1/4 to 2 inch, guide, carrying case Fewer sizes than 15-piece kits Budget to mid-range
ZNXIMER 16-piece Wide range of small to large holes Vacuum brazed, 6-65 mm Check shank and arbor fit Mid-range
Tolvaxo 11-piece Holes up to 2-1/2 inch Vacuum brazed, 1/4 to 2-1/2 inch, wet or dry Guide type not listed in the title Mid-range
DAYDOOR 15-piece Big holes, frequent use Vacuum brazed, 1/4 inch to 4 inch, beveling or milling bit and saw blade Highest cost of the group Premium
METOTY 15-piece Light use, tidy storage Serrated, 1/4 to 2 inch, dry or wet, EVA positioner, hard bag Maximum size 2 inch Budget
ASNOMY 10-piece Starter set with jig Serrated brazing, 1/4 to 2 inch, EVA mold guide jig Foam jig is a starting aid, not a clamp Budget

1. WORKEASE 18-Piece Diamond Kit: Best Value for Most Jobs

  • 18 pieces, sizes 6 to 50 mm
  • Double suction cup guide
  • Dry and wet use stated in the listing
  • Intended for ceramic, glass, porcelain, marble and granite

Best for: a homeowner who needs several different hole sizes for one project and wants a guide to keep the bit in place. Skip if: you need a hole larger than about 2 inches, such as for a large pipe or a recessed fitting.

Starting a hole on glazed porcelain is the hardest part. A bit with no centering pilot tends to wander, and once it scratches the glaze it is difficult to correct. A suction cup guide solves that by giving the bit a fixed starting point. With a double suction cup arrangement, the guide stays in position while you start at a slight angle and then bring the drill upright. The listing mentions dry and wet use, but the usual guidance from tile and drill makers is to keep the work cool with water whenever you can, because heat is what wears diamond edges fastest. We do not state a lifespan because the listing does not.

The 6 to 50 mm range covers most small penetrations: small cable holes, faucet holes of around 1 inch, a shower arm and similar. If you have to drill several holes in a row, the 18-piece count (which includes bits plus accessories) gives you spare sizes.

Pros: broad size range; guide included; wet or dry use; low price tier. Cons: maximum 50 mm; bit construction details are limited; piece count includes accessories.

2. Drilax 10-Piece Kit: Best for Bathroom and Kitchen Fixtures

  • 10 diamond bits, 1/4 to 2 inch
  • Includes a guide to improve accuracy
  • Carrying case
  • Listed for ceramic, porcelain, granite, glass and stone
  • Faucet, drain and showerhead holes mentioned in the listing

Best for: the small fixture holes in a remodel. Skip if: you want a metric range or very large core bits.

Fixture holes are usually between 1/4 inch and 2 inch, and this kit is aimed exactly at that range. The listing specifically mentions faucet, drain and showerhead holes, which is good: those are the most common reasons for drilling tile in a house. Because a 10-piece kit has fewer bits, there is less to lose and less to sort through. The carrying case keeps the bits from knocking against each other, which is important because the diamond edge is the working surface.

The guide is the other practical feature. For all hole saws, a guide that holds the bit steady for the first few seconds does more for the finished hole than extra power does. Start slowly, keep the tile wet, and let the tool cut; do not lean on it.

Pros: targeted size range; case included; guide included; manageable kit size. Cons: maximum 2 inch; fewer sizes; construction method not listed.

3. ZNXIMER 16-Piece Vacuum Brazed Kit: Best Metric Range

  • 16 pieces
  • Vacuum brazed diamond
  • 6 to 65 mm range
  • For porcelain tile, ceramic, glass, granite, marble and stone

Best for: projects that need sizes beyond 2 inches, up to about 2-1/2 inches, in metric increments. Skip if: you want a printed guide or a specific arbor type: these details are not stated in the title.

The phrase “vacuum brazed” refers to a way of bonding the diamond to the steel body. In general, makers describe it as a stronger bond than some other methods, which is why these bits are often sold for harder materials such as porcelain and granite. We cannot verify a difference in life or speed without measured data, so we do not claim one. The useful fact here is the size range: 6 to 65 mm gives you a few more mid-size holes than a 50 mm kit.

Before you buy, confirm how the bits attach to your drill. Some kits use a hex shank or a quick-change arbor, and some use a threaded arbor. If the listing does not state it, check the product page so you do not end up with a kit that does not fit your chuck.

Pros: wide size range; vacuum brazed construction; suited to hard tile. Cons: mid-range cost; guide and arbor details not listed in the title.

4. Tolvaxo 11-Piece Vacuum Brazed Kit: Best Mid-Size Set

  • 11 pieces, 1/4 to 2-1/2 inch
  • Vacuum brazed diamond
  • Wet or dry use stated
  • For porcelain tile, ceramic, glass, granite, stone, marble and pottery

Best for: someone who needs one or two holes slightly larger than 2 inches. Skip if: you need a kit with a guide and storage bag: those are not stated in the title.

The step from 2 inches to 2-1/2 inches is useful for some pipe penetrations, outdoor spigot holes and larger drains. A kit that goes to 2-1/2 inches covers those without the cost of a 4 inch kit. With eleven pieces you still get a reasonable range of smaller sizes.

As with every diamond core bit, let the bit do the work. Use light pressure, keep the bit cool with water when possible and lift it briefly to clear slurry. Rushing or leaning heavily is the most common way to chip the edge of a hole in porcelain.

Pros: reaches 2-1/2 inch; vacuum brazed; wet or dry. Cons: accessory details not listed; mid-range cost.

5. DAYDOOR 15-Piece Vacuum Brazed Kit: Best Premium for Large Holes

  • 15 pieces
  • Core drill sizes of 1/4, 5/16, 4/5, 1, 1-3/8, 2, 3 and 4 inch
  • Vacuum brazed diamond
  • Includes a beveling or milling bit and a saw blade according to the listing

Best for: remodelers or serious DIYers who regularly need holes up to 4 inches. Skip if: you only need a couple of small holes.

This is the only set in our list that goes up to 4 inches. A hole that large is typical for a vent, a larger pipe or certain recessed fittings. The inclusion of a beveling or milling bit is also useful: it lets you smooth the edge of a hole after you drill it. The cost tier is high, so it makes sense only if you need that range.

Large core bits need more care than small ones. Use a drill with a speed setting, start at low speed, keep the tile wet, and clamp or brace the tile if it is loose. Check the maker’s instructions for recommended speeds because the listing does not state them.

Pros: goes to 4 inch; beveling or milling accessory; vacuum brazed. Cons: premium cost; extra size range may be unnecessary for most.

6. METOTY 15-Piece Set: Best Budget Set With Storage

  • 15 pieces, 1/4 to 2 inch
  • Serrated diamond core bits
  • EVA positioner and hard storage bag
  • Dry and wet dual use stated

Best for: light DIY work and renters who want a set that stays organized. Skip if: you need larger holes or want a vacuum brazed construction.

The EVA positioner is a foam guide that helps you start the bit without it slipping. It is a good aid but it is not a clamp; hold it steady with your hand and take your time. The hard storage bag is a small thing that matters if the kit lives in a toolbox.

A serrated edge refers to the cutting rim shape. In general, serrations help carry away debris. We do not claim a performance difference from other styles.

Pros: budget; storage included; positioner included. Cons: 2 inch maximum; construction details limited.

7. ASNOMY 10-Piece Set: Best Simple Starter Jig Set

  • 10 pieces, 1/4 to 2 inch
  • Serrated brazing diamond core bits
  • EVA mold guide jig
  • For porcelain tile, glass, ceramic, stone and granite

Best for: first-time users who want a guide jig and a modest range of sizes. Skip if: you have many holes to drill, or you want a larger-sized kit.

A jig that matches each bit helps you position the hole and reduces slipping at the start. It is a beginner-friendly accessory. The set range of 1/4 to 2 inch is common and covers the usual fixture holes.

Pros: guide jig; clear size range; budget. Cons: foam jig is not a clamp; fewer bits than larger kits.

Also Consider

  • DECKRKAT 1-1/4 inch two-piece with pilot drill bit: a single-size solution if you need only one hole size, such as 32 mm.
  • Aobvrey 10-piece brazed set: a budget set for ceramic, glass, tile, granite, marble and plaster.
  • SHDIATOOL 15-piece porcelain kit: adds larger sizes, including a 4.5 inch bit, with SDS and hex shank options according to the listing.
  • LEKOMESH 14-piece kit with 5/8-11 thread: intended for 1/4 to 5 inch holes in porcelain, marble and granite; fits angle grinders with the proper thread.

How We Chose

We began with the real search intent: people who want a tile hole saw set for porcelain and ceramic, often with the question of whether to drill wet or dry. We reviewed listing details, maker descriptions and general tile-setting guidance, then compared size range, construction type, guide or jig accessories and storage. We kept to a maximum of two items per brand and favored kits that name sizes clearly. We did not personally use these products and we do not state lifespan, hole count or speed numbers. Where a listing does not state an arbor type or recommended RPM we say “not listed”. For general technique, we relied on guidance from tile-setting associations, tool makers’ instructions and trade publications.

Buying Guide

Choose sizes by the hole you need

Measure the fixture first. A faucet or small supply line usually needs a hole between about 1/2 inch and 1-3/8 inch, a drain commonly needs around 1-1/2 to 2 inches, and a pipe or vent may need 2-1/2 to 4 inches. If your project includes several sizes, a kit saves money. If you need only one size, a single bit is the cheaper route.

Wet versus dry

Many listings, including those above, say dry or wet use. In practice, water cooling is generally advised by tool makers because it reduces heat and carries away slurry. If you must drill dry, use short bursts, lift the bit to clear dust and let it cool. For a small DIY job, a spray bottle or a small dam of putty around the hole can supply water. Keep water away from electrical outlets and use a corded drill only with proper ground-fault protection.

Bit construction

You will see terms such as “vacuum brazed”, “serrated”, “brazed” and “sintered”. Makers use them to describe how the diamond is attached and how the rim is shaped. We cannot compare them without measured data, so use them as clues, not guarantees. If you plan to drill many holes or very hard porcelain, a vacuum brazed set may be a more suitable choice, but check the product page for details.

Arbor and drill fit

Check how the kit attaches to a tool. Many kits use a hex shank for a drill or impact driver; others use a 5/8-11 thread for an angle grinder. A kit that fits your tool is better than a larger kit that does not. Use a drill with variable speed and start slowly.

Guides and jigs

A suction cup guide or a foam jig helps you start the bit at the right spot on slippery glazed tile. Another common trick is to apply masking tape over the mark. Whichever guide you use, start with the drill at a slight angle, then bring it upright once a groove forms.

How to Drill a Clean Hole in Porcelain, Step by Step

Technique matters as much as the kit. These steps follow the general guidance in diamond bit instructions; always read the sheet that comes with your set.

  1. Mark the center and confirm the size. Measure the fixture hole requirement, then mark the center with a pencil or a small cross of masking tape. The tape gives the bit something to bite into on glazed tile.
  2. Check what is behind the tile. On a wall, make sure there are no pipes or wires. On a floor, check for radiant heating mats before you drill.
  3. Set up a guide. Use the suction cup guide, foam jig or a scrap board with a pre-cut hole. The goal is to keep the bit from drifting during the first few seconds.
  4. Add water. A spray bottle, a squeeze bottle or a ring of plumber’s putty filled with water keeps the diamond cooler. If you drill dry, work in very short bursts.
  5. Start at a slight angle at low speed. Tilt the drill so only part of the rim touches the tile, let a shallow groove form, then bring the drill upright.
  6. Let the bit cut. Use light pressure and keep the drill straight. Lift the bit now and then to clear slurry and to let water flow into the cut.
  7. Ease off near the back. As the bit breaks through, reduce pressure to avoid chipping the back edge of the tile. Finish from the back side if the material and access allow.
  8. Clean and dry the bit. Rinse off slurry, dry it and return it to the case so the diamond edge does not rub against other bits.

This is also where the choice of kit shows. A set with several small sizes lets you start with a small pilot-size hole and then step up in size if you are unsure about accuracy, while a bigger kit gives you the option to match exactly the diameter in the fixture instructions. If a hole needs to be a precise size and you have only one chance on an expensive tile, practice on a spare piece of the same tile first. Spare tiles are often left over after installation, and a practice hole teaches you more than any listing can.

Safety is straightforward but important. Wear safety glasses, because ceramic and porcelain can shed sharp chips. Wear a dust mask if you drill dry, and keep corded tools away from standing water. If you are working above a finished ceiling or on a wall with plumbing, ask a professional if you are unsure what lies behind the surface.

Common Mistakes

  • Pressing hard. Light, steady pressure gives a cleaner edge and protects the bit.
  • Drilling without securing the tile or the surface behind it. Back up thin tile and avoid drilling near an edge.
  • Skipping eye and dust protection. Wear safety glasses and a dust mask, especially when drilling dry.
  • Forgetting to check for pipes or wires behind the wall before drilling.

Frequently Asked Questions

What is the best tile hole saw set for porcelain?

For most DIY jobs, a kit that covers the fixture sizes you need and includes a guide is best, such as the WORKEASE 18-piece or the Drilax 10-piece. For hard porcelain and large holes, the vacuum brazed kits are worth a look.

Can I use a tile hole saw dry?

Many listings say dry or wet use. In general, tool makers advise using water when possible because it reduces heat. If you drill dry, work in short bursts and let the bit cool.

What size hole saw do I need for a faucet?

It depends on the faucet. Check the installation instructions for the required hole diameter, then choose a kit that includes that size. Many bathroom faucets use holes around 1 to 1-3/8 inch, but confirm with your fixture.

Do I need a guide to drill tile?

It is strongly recommended on glazed tile. A suction cup guide, foam jig or a piece of masking tape stops the bit from sliding at the start.

Are diamond hole saws good for ceramic as well as porcelain?

Listings for all the sets above name both ceramic and porcelain. Ceramic is generally softer, so it is usually the easier material to drill, but be careful with chipping at the edge.

How many holes can a set drill?

The listings we reviewed do not state a hole count, and we do not make lifespan claims. It depends on the tile hardness, cooling, drill speed and pressure.

Can I use these with a regular drill?

Many can be used with a standard drill that has variable speed. Check the arbor or shank type in the maker’s description, and use an angle grinder only with kits made for the 5/8-11 thread.

Which One Should You Buy?

If you want a flexible, low-cost set, buy the WORKEASE 18-piece. If your job is the bathroom or kitchen, the Drilax 10-piece is a clean fit. If you need slightly larger holes, look at the Tolvaxo or the ZNXIMER. If you regularly need holes of 3 or 4 inches, the DAYDOOR is the more complete kit. For a first-time user with a tight budget, the METOTY or ASNOMY sets offer guides and a modest size range. Always check the hole size your fixture needs before you buy, and follow the maker’s guidance on water, speed and pressure.

Sources

  • Manufacturer product descriptions for the WORKEASE, Drilax, ZNXIMER, Tolvaxo, DAYDOOR, METOTY and ASNOMY kits
  • Tile Council of North America (TCNA) installation guidance
  • Tool manufacturer instructions for diamond core bits
  • Trade publications on drilling porcelain tile

Last updated: October 2026

L
Loa Power Tools Editorial Team
We compare specs, warranty terms, long-term owner feedback and street pricing before anything earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
Best Tile Hole Saws for Porcelain and Ceramic:…Check price on Amazon

Related guides

Browse all Saws guides →

More from Amazon

Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

Amazon Business

A free business account with business pricing and bulk-buying tools for work, shop or home office.

Create a business account
Amazon Prime

Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

Start a Prime free trial
Audible

Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

Try Audible free
Amazon Music Unlimited

Ad-free music streaming. Eligible new subscribers can start with a free trial.

Try Music Unlimited free

As an Amazon Associate we earn from qualifying purchases.