Our Top Picks
SUIZAN Dozuki Dovetail Saw 6" Cross Cut6 Inch (150mm)15.16 x 0.83 x 2.52 inches0.4 PoundsCheck on Amazon
SUIZAN Dozuki Dovetail Saw 7" Rip Cross Cut7 Inch (180mm)16.14 x 1.18 x 2.28 inches0.4 PoundsCheck on Amazon
What's inside
- Top Picks at a Glance
- Comparison Table
- What Are Vintage-Style Saws, and What Do the Names Mean?
- 1. Thomas Flinn 10 inch Gent Dovetail Saw: Best Overall Dovetail Saw
- 2. Spear and Jackson B9812 12 inch Tenon Saw: Best Value Tenon Saw
- 3. Lynx Garlick 24 inch Crosscut Saw: Best Traditional Crosscut
- 4. Dremel MS20-01 Moto-Saw: Best Small Electric Saw
- 5. RotoZip SS355-10 Spiral Saw: Best Spiral Saw
- 6. WORX BladeRunner Portable Tabletop Saw: Best for Beginners
- 7. Fiskars 7-13 ft DualAction Extendable Pole Pruner: Best Telescopic Tree Lopper
- Also Consider
- Saw Care: Wax, Rust and Storage
- Buying a Used Saw: What to Check
- How We Chose
- Buying Guide
- Common Mistakes
- Frequently Asked Questions
- Which One Should You Buy?
- Sources
- Top Picks at a Glance
- Comparison Table
- What Are Vintage-Style Saws, and What Do the Names Mean?
- 1. Thomas Flinn 10 inch Gent Dovetail Saw: Best Overall Dovetail Saw
- 2. Spear and Jackson B9812 12 inch Tenon Saw: Best Value Tenon Saw
- 3. Lynx Garlick 24 inch Crosscut Saw: Best Traditional Crosscut
- 4. Dremel MS20-01 Moto-Saw: Best Small Electric Saw
- 5. RotoZip SS355-10 Spiral Saw: Best Spiral Saw
- 6. WORX BladeRunner Portable Tabletop Saw: Best for Beginners
- 7. Fiskars 7-13 ft DualAction Extendable Pole Pruner: Best Telescopic Tree Lopper
- Also Consider
- Saw Care: Wax, Rust and Storage
- Buying a Used Saw: What to Check
- How We Chose
- Buying Guide
- Common Mistakes
- Frequently Asked Questions
- Which One Should You Buy?
- Sources
As an Amazon Associate I earn from qualifying purchases. This post may contain affiliate links at no extra cost to you.
Home › Saws › Vintage and Specialty Hand Saws: Dovetail, Tenon and Small Electric
The best specialty saw depends on the cut: a 10 inch dovetail saw for fine joints, a 12 inch tenon saw for shoulders and bigger joinery, a 24 inch crosscut saw for boards, and a small electric tool such as a scroll saw or spiral saw when curves or cut-outs are the job. Our top picks are the Thomas Flinn 10 inch Gent dovetail saw for joinery and the Dremel Moto-Saw for small electric work. This guide covers the vintage-style hand saw types people search for, how to care for them with wax, and the small electric saws and tree loppers that tend to get lumped into the same searches.
This is a research-based guide. We did not personally use these products. We do not state vintage values, ages or authenticity claims, and the saws below are new-production tools described as listed. If you buy a genuinely old saw from a seller, inspect it in person or ask for clear photos of the plate, teeth and handle.
As an Amazon Associate we earn from qualifying purchases at no extra cost to you.
Top Picks at a Glance
- Best Overall Dovetail Saw: Thomas Flinn 10 inch Gent dovetail saw, 20 TPI
- Best Value Tenon Saw: Spear and Jackson B9812 12 inch Predator tenon saw, 15 points
- Best Traditional Crosscut Saw: Lynx Garlick 24 inch crosscut saw, 10 TPI
- Best Small Electric Saw: Dremel MS20-01 Moto-Saw compact scroll saw
- Best Spiral Saw: RotoZip SS355-10 spiral saw kit
- Best Table-Top Saw for Beginners: WORX BladeRunner portable tabletop saw
- Best Telescopic Tree Lopper: Fiskars 7-13 ft DualAction extendable pole pruner
Comparison Table
| Product | Best for | Key specs (as listed) | Watch for | Price tier |
|---|---|---|---|---|
| Thomas Flinn 10″ Gent dovetail | Fine joinery | 10 in, 20 TPI, solid rolled brass back, walnut handle | Takes sharpening skill | Premium |
| Spear and Jackson B9812 tenon | Tenons and general joinery | 12 in (305 mm), 15 points per inch | Fine teeth are slower on thick stock | Budget |
| Lynx Garlick 24″ crosscut | Cutting across boards | 24 in, 10 TPI, taper-ground plate, beech handle | Long saw needs a bench and space | Premium |
| Dremel MS20-01 Moto-Saw | Small curves in thin wood and plastic | Variable speed compact scroll saw | Not for thick stock | Mid-range |
| RotoZip SS355-10 | Cut-outs in drywall and thin panels | 5.5 amp, 3 collets, 2 bits | Dusty and fast; wear eye and lung protection | Mid-range |
| WORX BladeRunner | Beginner table-top cuts | 5.5 amp, tool-free blade change, portable table-top | Small table, limited depth | Mid-range |
| Fiskars 7-13 ft pole pruner | High branches, hand-powered | 7 to 13 ft extendable, two cutting modes | Arm fatigue on long cuts | Premium |
What Are Vintage-Style Saws, and What Do the Names Mean?
Vintage-style hand saws are traditional Western saws with a steel plate and a wooden handle, in contrast to modern disposable-blade saws. The names tell you the job. A dovetail saw is a small backsaw, with a stiffening spine along the top, used for cutting joints. A tenon saw is a larger backsaw used for tenons and shoulders. A crosscut saw is a long, tapered saw with teeth shaped to cut across the grain. A rip saw has teeth shaped to cut along the grain.
Tooth count is described as TPI (teeth per inch) or “points per inch”, which is one more than TPI. The more teeth per inch, the finer and slower the cut. A dovetail saw commonly sits in the range of 15 to 20 TPI with a rip-style tooth pattern and very little set, which produces a narrow cut. A tenon saw around 13 TPI is a common size, and it may be filed for rip or crosscut. Rip versus crosscut depends more on how the teeth are filed and set than on the tooth count.
1. Thomas Flinn 10 inch Gent Dovetail Saw: Best Overall Dovetail Saw
- 10 inch blade, 20 TPI
- Solid rolled brass back
- 1-5/8 inch wide plate, walnut handle (as listed)
Best for: hand-cut dovetails and fine joints in furniture-grade wood. Skip if: you are not willing to learn to sharpen or just want a cheap saw for the garage.
This is the kind of saw that “best vintage dovetail saws” searchers are usually after: a brass-backed saw with a hardwood handle and a fine rip tooth. The brass back adds weight and keeps the plate straight, so the saw tracks itself in the cut. A 20 TPI saw makes a narrow, clean cut but takes time on anything thick. It is made for small, accurate joint work rather than breaking down boards.
New-production saws like this often arrive sharp but may need a touch-up of the set or a light polish of the plate. That is normal for traditional tools, and many woodworkers sharpen their own. We cannot comment on the value of any old saw, and we do not rate antiques.
Pros: Fine cut, brass back for stability, traditional look. Cons: Premium cost, needs care and sharpening.
2. Spear and Jackson B9812 12 inch Tenon Saw: Best Value Tenon Saw
- 12 inch (305 mm) blade
- 15 points per inch
- Predator hardpoint tooth (as listed)
Best for: tenons, shoulders and general joinery on a budget. Skip if: you want a saw you can re-file yourself, since hardpoint teeth are intended to be used until they dull.
This is a practical stand-in for readers who search “best vintage tenon saws” but do not want to hunt for old tools. A 12 inch backsaw is the usual size for most tenon work. A hardpoint tooth stays sharp longer than a regular tooth, but it generally cannot be resharpened with a regular file. If you want a saw you can sharpen again and again, the Lynx 12 inch tenon saw with 13 TPI (listed at the premium end) is an alternative, filed for rip cutting.
For shoulders and cross-grain work, a finer tooth gives a cleaner cut. For ripping a tenon cheek along the grain, a lower TPI is faster. If you want one saw to do both, a 12 inch saw at 13 to 15 TPI is a common compromise.
Pros: Low cost, standard size, ready to use. Cons: Hardpoint teeth, less refined than premium saws.
3. Lynx Garlick 24 inch Crosscut Saw: Best Traditional Crosscut
- 24 inch blade, 10 TPI
- Taper-ground plate
- Stained beech handle, filed for crosscutting (as listed)
Best for: cutting boards across the grain by hand. Skip if: you mainly cut sheet goods or need to break down large stock quickly.
A 24 inch crosscut saw is a traditional “panel saw” style tool for cutting boards to length. The taper-ground plate is thinner at the back than at the teeth, which reduces binding. This matches searches for “best vintage crosscut saws” and “best vintage woodworking hand saws”. If you want an actual antique saw, expect to inspect the plate for kinks, rust pitting and a loose handle. We do not give values or authenticity opinions.
If you see a one-person felling crosscut saw in the store, such as a 3 foot one-man crosscut saw, that is a different tool for logs, not for furniture boards.
Pros: Traditional, accurate crosscut, taper-ground plate. Cons: Premium price, large and slower than power saws.
4. Dremel MS20-01 Moto-Saw: Best Small Electric Saw
- Variable speed compact scroll saw
- Cuts wood and plastic, as listed
- Kit with blades
Best for: hobby cuts, curves and detail work in thin stock. Skip if: you need to cut thick lumber.
This is a good answer to searches like “best small electric hand saws” and “best table top jig saws for beginners” when the goal is small, controlled cuts. A scroll saw holds a thin blade in tension and moves it up and down, which cuts tight curves. Blades are cheap and replaceable. Start slowly and let the blade do the work, because pushing hard bends it.
Pros: Compact, variable speed, good for hobbies. Cons: Thin cut capacity, small table.
5. RotoZip SS355-10 Spiral Saw: Best Spiral Saw
- 5.5 amp corded motor
- Three collets and two bits included (as listed)
- Compact and light
Best for: cut-outs in drywall, thin plywood and similar sheet materials. Skip if: you want a precise woodworking cut.
A spiral saw uses a small rotating bit that cuts in any direction, so it is used for outlet cut-outs, openings and tracing templates. It creates lots of dust and can grab, so use eye and breathing protection and keep both hands under control. This is the answer to “best spiral saws”. It is not a replacement for a hand saw in joinery.
Pros: Powerful for its size, fast cut-outs. Cons: Dusty, easy to wander off a line.
6. WORX BladeRunner Portable Tabletop Saw: Best for Beginners
- 5.5 amp
- Portable table-top design
- Tool-free blade change (as listed)
Best for: beginners who want a compact table-mounted jig-style saw for light cuts. Skip if: you need to cut thick material in a straight line.
The BladeRunner is a small table-top saw that holds a jigsaw-style blade pointing up through a table. The table makes it easier to guide the work, which suits people who find a hand-held jigsaw hard to control. The listing says it cuts wood, metal, tile, aluminum and plastic with the right blade. Match the blade to the material, and keep fingers clear of the blade.
Pros: Beginner-friendly, portable, tool-free blade change. Cons: Small capacity, not a precise joinery saw.
7. Fiskars 7-13 ft DualAction Extendable Pole Pruner: Best Telescopic Tree Lopper
- 7 to 13 ft extendable pole
- Two cutting modes (as listed)
- Telescoping tree pruner
Best for: high branches that you can prune from the ground. Skip if: the branch is near power lines.
“Best telescopic tree loppers” appears in the same search group, so we include one. A manual pole pruner has a pole, a lopper head and a pull cord or lever. Check the maximum branch diameter in the listing and do not force thicker wood. Stay away from power lines, wear eye protection and a hard hat, and stand clear of the falling branch.
Pros: Long reach, no power needed, extendable. Cons: Fatiguing at full reach, limited cut size.
Also Consider
- IVY Classic 10 inch dovetail saw: a lower-cost dovetail saw with a hardwood handle, for those who want to try the style first.
- Jorgensen 10 inch dovetail reversible saw, 13 TPI: a modern option aimed at flush cuts and joints.
- DEWALT 20V MAX XR oscillating multi-tool: the closest powered answer to “sonic saws” searches, which refers to oscillating tools such as the Rockwell Sonicrafter line; check blade fit if you use another brand.
- Bumblechutes All Natural Shop Wax, 8 oz: a paste wax for tool surfaces; see the care section below.
Saw Care: Wax, Rust and Storage
Hand saws are best kept clean, dry and lightly waxed. Woodworkers often wax the sides of the plate, not the teeth, to cut friction and reduce rust. Some use paste wax, paraffin or light oil, while others note that wax is only a mild rust preventer and must be reapplied. Binding in the cut is often a set problem rather than a wax problem, since a saw needs enough set to clear the kerf. This is the answer to the searches “best wax for hand saws” and “best wax for saws”. A shop paste wax like the Bumblechutes tin or a standard furniture paste wax is a common choice, applied thinly and wiped off.
Store saws on a wall rack or in a tool roll, with the teeth protected. Wipe the plate after use, and wipe away moisture before you hang the saw.
Buying a Used Saw: What to Check
This covers “best vintage used circular saws”, “best vintage worm drive saws” and “best user saws” searches, which are really used-tool searches. For any used hand or power saw: check that the plate is straight by sighting down it, look for deep rust pitting near the teeth, check the handle for cracks and loose saw nuts, and ask whether the teeth have been re-filed. For a used worm-drive circular saw, check the cord, the guard action, the blade brake if it has one, and whether parts are still available. We do not give prices or authenticity opinions for old tools, and we recommend a modern guard and a new blade on any used power saw.
How We Chose
We searched the product store for dovetail saws, tenon saws, crosscut saws, small electric saws, spiral saws, table-top saws, pole pruners and shop wax. We kept products with a clear brand and size, and used only the numbers in the listing. For care and tooth-pattern information, we used widely shared woodworker guidance, including discussion on woodworking forums, and we label those as general practice rather than a maker rule. We did not personally use these products. We do not state vintage values or authenticity claims.
Buying Guide
Match the saw to the cut
Dovetails need a small saw with 15 to 20 TPI. Tenons and shoulders suit a 12 inch backsaw at roughly 13 to 15 TPI. Cutting boards across the grain needs a longer panel or crosscut saw. Curves need a scroll saw or a jigsaw.
Choose rip or crosscut filing
Rip-filed teeth are faster along the grain, and crosscut teeth give a cleaner cut across it. A dovetail saw with a fine rip tooth is a good all-round option for small joints.
Think about sharpening
Hardpoint teeth cannot generally be re-filed with a normal file, while traditional teeth can. If you want a saw for life, pick one that can be sharpened.
Check handle and plate quality
A comfortable handle, a straight plate and a firm saw nut mean a better cut. For backsaws, look at how the back is fixed to the plate.
Safety with small electric saws
Wear eye protection, secure the work and unplug the tool for blade changes. Use dust protection for spiral saws and anything that cuts drywall.
Common Mistakes
- Buying a fine dovetail saw and trying to cut thick boards with it.
- Waxing the teeth instead of the plate.
- Expecting a hardpoint saw to be re-sharpened.
- Using a spiral saw for precise joinery.
- Buying an old saw without checking whether the plate is straight.
Frequently Asked Questions
What is the best vintage-style dovetail saw?
The best vintage-style dovetail saw is one with a brass or steel back, a 15 to 20 TPI rip tooth and a comfortable hardwood handle. The Thomas Flinn 10 inch Gent is a good example, and the IVY Classic is a lower-cost way to try the style.
What is the difference between a tenon saw and a dovetail saw?
A dovetail saw is smaller and finer, and a tenon saw is longer and a bit coarser. A dovetail saw suits small joints, and a tenon saw suits shoulders and larger tenons.
What is the best wax for hand saws?
A thin coat of paste wax or paraffin on the plate is a common choice. Wax reduces friction, but it does not prevent rust on its own, so also keep the saw dry and wipe it after use.
What is a sonic saw?
Sonic saw is usually a search for an oscillating multi-tool, such as the Rockwell Sonicrafter. It cuts by vibrating a short blade side to side and is useful for flush cuts and tight spaces.
What is a good small electric saw for beginners?
A compact scroll saw like the Dremel Moto-Saw or a table-top saw like the WORX BladeRunner suits small, controlled cuts. Both are for light work, not large timber.
How do I choose a telescopic tree lopper?
Check the reach, the maximum branch diameter and the weight. A pole pruner that reaches 13 feet will feel heavy at full extension, so choose one that fits your strength. Stay away from power lines.
Are old saws worth buying?
They can be, if the plate is straight and the handle is sound, but we do not give values or authenticity opinions. Inspect before you buy, and budget for sharpening.
Which One Should You Buy?
For fine hand joinery, start with the Thomas Flinn dovetail saw, or the IVY Classic if you want to try the style on a smaller budget. For tenons, choose the Spear and Jackson 12 inch saw. For cutting boards by hand, the Lynx 24 inch crosscut saw is the traditional pick. For small curves, pick the Dremel Moto-Saw, for cut-outs the RotoZip spiral saw, and for a beginner table-top saw the WORX BladeRunner. If you need to reach high branches, a pole pruner such as the Fiskars is the right tool, not a hand saw.
Sources
- Product listing details from the store for each item named above
- Thomas Flinn and Lynx saw product descriptions
- Dremel, RotoZip, WORX and Fiskars product specifications as listed
- Sawmill Creek woodworking forum discussion on waxing hand saws and tooth patterns
- Wikipedia entry on backsaws for general terminology
Last updated: October 2026
Related guides
Read next
- Compact One-Hand Reciprocating Saws for Tight Spaces and Pruning
- Best Hand Saws for Cutting Wood: Panel, Folding and Hacksaw Picks
- Best Tile Hole Saws for Porcelain and Ceramic: Sizes and Sets
- Best Saws for Cutting Plywood: Circular, Track, Table and Miter Picks
- Which Saw or Hedge Trimmer for the Job: Chain, Pole, Miter and More
More from Amazon
Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.
A free business account with business pricing and bulk-buying tools for work, shop or home office.
Create a business accountFree shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.
Start a Prime free trialAudiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.
Try Audible freeAd-free music streaming. Eligible new subscribers can start with a free trial.
Try Music Unlimited freeAs an Amazon Associate we earn from qualifying purchases.




Write Your Review
No reviews yet. Be the first to share your experience!